Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Microwave oven

Related publications (30)

The 2024 Magnonics Roadmap

Dirk Grundler, Thomas Yu, Ping Che, Qi Wang

Magnonics is a research field that has gained an increasing interest in both the fundamental and applied sciences in recent years. This field aims to explore and functionalize collective spin excitations in magnetically ordered materials for modern informa ...

2024

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Microwave Metalens Antennas

Yuanyan Su

Recently, there has been growing interest in the use of metamaterial (MTM)-based lenses, also known as metalenses, as innovative antenna technology. Increasingly widespread applications of metalenses in modern microwave communication and sensing systems ha ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Rotating spokes, potential hump and modulated ionization in radio frequency magnetron discharges

Haomin Sun, Liang Xu

In this work, the transition from the gradient drift instability (GDI) into an m = 1 rotating spoke in the radio frequency magnetron discharge was studied by means of the two-dimensional axial-azimuthal (z - y) particle-in-cell/Monte Carlo collision method ...

Iop Publishing Ltd2023

Dataset for "Biodegradable materials as sensitive coatings for humidity sensing in S-band microwave frequencies"

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Leticia de Sousa

This dataset contains the data collected during the SNSF BRIDGE GREENsPACK project (Grant no. 40B2-0_187223) in association with the recent publication entitled “Biodegradable materials as sensitive coatings for humidity sensing in S-band microwave frequen ...

Zenodo2023

Biodegradable materials as sensitive coatings for humidity sensing in S-band microwave frequencies

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Leticia de Sousa

Worldwide, electronic waste represents the fastest-growing stream of waste. With an increasing number of connected devices, passive and eco-friendly environmental sensing solutions need to be developed. Wireless passive devices for RFID and sensing exist, ...

2023

Frontiers in the Application of RF Vacuum Electronics

Timothy Goodman

The application of radio frequency (RF) vacuum electronics for the betterment of the human condition began soon after the invention of the first vacuum tubes in the 1920s and has not stopped since. Today, microwave vacuum devices are powering important app ...

2023

Single Chip Dynamic Nuclear Polarization Microsystems

Nergiz Sahin Solmaz

Nuclear magnetic resonance (NMR) methods are powerful tools employed in many fields, including physics, chemistry, material science, biology, and medicine. The use of NMR methodologies in an even wider range of applications is often hindered by the relativ ...

EPFL2023

Numerical and experimental investigations of a microwave interferometer for the negative ion source SPIDER

Ivo Furno, Rémy Jacquier, Riccardo Agnello

The electron density close to the extraction grids and the co-extracted electrons represent a crucial issue when operating negative ion sources for fusion reactors. An excessive electron density in the plasma expansion region can indeed inhibit the negativ ...

IOP Publishing Ltd2023

Inflight Microwave Drying Process of Micro-droplets for High Resolution 3D printing

Kwanghoon Choi

A new Additive-Manufacturing (AM) or 3D printing concept is proposed to improve the printing resolution for metal additive manufacturing in the frame of the SFA-AM project, Powder Focusing for Beam-Induced Laser 3D Printing. The project aims to transport s ...

EPFL2022

From pulsed-DCMS and HiPIMS to microwave plasma-assisted sputtering: Their influence on the properties of diamond-like carbon films

Aïcha Hessler-Wyser, Johann Michler, Caroline Hain

The fabrication of high-hardness non-hydrogenated diamond-like carbon (DLC) via standard magnetron sputtering (MS) is often hindered by the low sputtering yields and ionisation rates of carbon, therefore investigations into pulsed alternatives of MS, else ...

ELSEVIER SCIENCE SA2022

Real space and reciprocal space investigations of the spin dynamics in skyrmion-hosting materials

Le Yu

Magnetic skyrmions are whirl-like spin configurations with particle-like properties protected by non-trivial topology. Due to their unique spin structures and dynamical properties, they have attracted tremendous interests over the past decade, from fundame ...

EPFL2022

Effects of resonator geometry and substrate stiffness on the tunability of a deformable microwave metasurface

Romain Christophe Rémy Fleury

Tunable metasurfaces can shift their resonant frequency through different approaches, one of which is applying mechanical deformations. Here, we show the effects of two key factors on the tunability of deformable metasurfaces; the resonator geometry and su ...

2022

Design and printing of a coplanar capacitive proximity sensor to detect the gap between dielectric foils edges

Danick Briand, Rubaiyet Iftekharul Haque, Martin Lubej

This paper presents the design and development of a coplanar capacitive proximity sensor for the detection of the gap between the edges of dielectric foils. The finite element analysis is applied to study the design of the sensor by investigating the effec ...

2022

Coherent terahertz-to-microwave link using electro-optic-modulated Turing rolls

Tobias Kippenberg, Wenle Weng, Jijun He, Arslan Sajid Raja, Anat Siddharth, Miles Henry Anderson

Arising from modulation instability, Turing rolls in optical Kerr microresonators have been used in the generation of optical frequency combs and the synthesis of microwave and terahertz frequencies. In this work, by applying electro-optic modulation on te ...

AMER PHYSICAL SOC2021

Quantum coherent microwave-optical transduction using high-overtone bulk acoustic resonances

Tobias Kippenberg, Terence Albert Emile Blésin

A device capable of converting single quanta of the microwave field to the optical domain is an outstanding endeavor in the context of quantum interconnects between distant superconducting qubits, but likewise can have applications in other fields, such as ...

AMER PHYSICAL SOC2021

Magnonic crystals with reconfigurable magnetic defects for spin-based microwave electronics

Korbinian Baumgärtl

Collective spin excitations can propagate in magnetically ordered materials in the form of waves. These so-called spin waves (SWs) or magnons are promising for low-power beyond-CMOS information processing, which does not rely anymore on the lossy movement ...

EPFL2021

Gain-switched semiconductor laser driven soliton microcombs

Tobias Kippenberg, Junqiu Liu, Erwan Guillaume Albert Lucas, Wenle Weng, Jijun He

Dissipative Kerr soliton generation using self-injection-locked III-V lasers has enabled fully integrated hybrid microcombs that operate in turnkey mode and can access microwave repetition rates. Yet, continuous-wave-driven soliton microcombs exhibit low e ...

Nature Research2021

Kilowatt-range Picosecond Switching Based on Microplasma Devices

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Armin Jafari, Mohammad Samizadeh Nikooytabalvandani

Plasma formation in micro- and nano-scales enables an ultrahigh-dv/dt picosecond switching in an integrated circuit form factor. Such on-chip plasma devices could provide a transformative approach to achieving high-power levels at very high frequencies, fa ...

Institute of Electrical and Electronics Engineers2021

Integration concept of an Electron Cyclotron System in DEMO

Minh Quang Tran, René Chavan

The pre-conceptual layout for an electron cyclotron system (ECS) in DEMO is described. The present DEMO ECS considers only equatorial ports for both plasma heating and neoclassical tearing mode (NTM) control. This differs from ITER, where four launchers in ...

2021