Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Lamination

Related publications (25)

Experimental characterization and stochastic models for time-dependent rupture of thin-ply composite laminates

Kanthasamy Ubamanyu

Thin-laminate composites with thicknesses below 200 mu m hold significant promise for future, larger, and lighter deployable structures. This paper presents a study of the time-dependent failure behavior of thin carbon-fiber laminates under bending, focusi ...

2024

Numerical investigation of two-dimensional Mode-II delamination in composite laminates

Thomas Keller, Anastasios Vassilopoulos, Congzhe Wang

Existing standards for delamination tests on composite materials typically employ one-dimensional (1D) beam specimens. However, such specimens may not represent real delamination scenarios in composite structures, where cracks tend to propagate in two dime ...

Elsevier Sci Ltd2024

A model for the consolidation of hybrid textiles considering air entrapment, dissolution and diffusion

Véronique Michaud, Vincent Werlen

A new model is proposed for the consolidation of hybrid textiles, in which air entrapment and dissolution are considered. One of the key parameters is tow permeability, which is described by the analytical model of Gebart and validated at very high fibre v ...

ELSEVIER SCI LTD2023

A hybrid Selective Laser Sintering based process for the additive manufacturing of architectured composites

Erwan Philippe Guenier

Additive Manufacturing also commonly referred as 3D printing has been given a lot of interest lately. Market is growing exponentially and the aim for obtaining more complex and ready-to use parts is emerging. All the 3D printing processes consist in buildi ...

EPFL2023

The effect of storage conditions on the long-term stability of ethylene-vinyl-acetate (EVA) copolymer used in glass/glass modules

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Eleonora Annigoni, Andrew Wayne Fairbrother, Luca Gnocchi

We evaluate the effect of storage conditions of uncured encapsulant rolls and the potential consequences on photovoltaic (PV) module performance. We show the impact of residual water trapped inside laminated double glass PV modules after lamination and dur ...

ELSEVIER2023

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Vincent Werlen, Colin Gomez

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

Review of hybrid composites fatigue

Anastasios Vassilopoulos, Dharun Vadugappatty Srinivasan

Hybrid composites become popular and are today used in a large number of contemporary structural applications. When compared to non-hybrid composites, hybridization offers additional benefits since the mixing of cheaper, low-quality fibers, with more expen ...

2021

Flexural behaviour of post-tensioned glass beams: Experimental and analytical study of three beam typologies

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

The concept of post-tensioned glass beams builds on the concrete analogy of the reinforced glass beams. By additionally prestressing the reinforcement in a post-tensioned system, a compressive pre-stress is applied on the glass, enhancing the initial fract ...

2021

Accurate equilibrium-based interlaminar stress recovery for isogeometric laminated composite Kirchhoff plates

Pablo Antolin Sanchez

Despite the accelerated deployment of laminated composites in a wide variety of markets due to their peculiar engineering features, the design of those materials is often restrained by the lack of cost-efficient modeling techniques. In fact, the existing s ...

ELSEVIER SCI LTD2021

Improving delamination resistance through tailored defects

John Botsis, Niels Pichler

Delamination is a well-known damage mode exhibited by laminated composites which has been extensively studied in unidirectional laminates (UD). In this work, a novel strategy consisting of the introduction of a small interlaminar defect to enhance the frac ...

2020

Mechanical properties of a balsa wood veneer structural sandwich core material

Thomas Keller, Anastasios Vassilopoulos, Niloufar Vahedi

Balsa wood is an appropriate core material for structural sandwich applications due to its high strength- and stiffness-to-weight ratios. However, the mechanical properties vary considerably owing to the inherent scattering of natural wood materials. One a ...

2020

Experiments and numerical modelling on angle-ply laminates under remote mode II loading

John Botsis, Georgios Pappas, Niels Pichler, Charlie Joseph Simon Blondeau

Delamination is a very frequent damage mechanism that affects the integrity of laminated composites. In this study, the effect of ply orientation on crack growth resistance was analyzed for three different anti-symmetric interfaces (+/- 30 degrees, +/- 45 ...

ELSEVIER SCI LTD2020

Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite

Yann Albert Gérard Lebaupin

In this paper, the low-energy impact behavior of a fully biobased composite made of bio-sourced polyamide 11 resin reinforced with flax fibers was investigated. Different composite laminates were studied in order to determine the stacking sequence effects ...

SAGE PUBLICATIONS LTD2019

Modeling of fatigue behavior based on interaction between time- and cyclic-dependent mechanical properties

Thomas Keller, Anastasios Vassilopoulos

A general constitutive equation was established using the theory of viscoelasticity in order to consider the interaction of the time- and cyclic-dependent mechanical properties of laminated composites. This equation was solved for two specific loading patt ...

2019

Method for manufacturing hybrid soft-rigid electronic devices

Florian Dylan Fallegger, Hadrien Olivier Michaud, Arthur Edouard Hirsch, Aaron Powers Gerratt

A method for manufacturing a hybrid soft-rigid electromechanical device comprising the steps of i) placing electronic components on a temporary substrate; ii) encapsulating said electronic components within a soft curable material and curing said soft cura ...

2019

Blocking the Charge Recombination with Diiodide Radicals by TiO2 Compact Layer in Dye-Sensitized Solar Cells

Ulf Anders Hagfeldt, Nikolaos Vlachopoulos, Kazuteru Nonomura

The addition of a compact titanium dioxide (TiO2) layer between the fluorine-doped tin oxide (FTO) coated glass substrate and the mesoporous TiO2 layer in the dye-sensitized solar cell (DSC) based on the iodide/triiodide redox couple (I-/I-3(-)) is known t ...

ELECTROCHEMICAL SOC INC2019

Electrospun nanofibrous interleaves for improved low velocity impact resistance of glass fibre reinforced composite laminates

Véronique Michaud, Amaël Maximilien Cohades

This study analyses the damage tolerance of nanofibre interleaved composites when subjected to low velocity impact. Cross-ply glass/epoxy composite laminates are produced. Drop-weight impact and residual compressive strength measurements are performed on t ...

2018

Effects of load interruption on the fatigue life of GFRP composites

Thomas Keller, Anastasios Vassilopoulos, Abdolvahid Movahedirad

The effect of cyclic loading interruption on the fatigue behavior of angle-ply (±45)2S glass/epoxy composite laminates was investigated by comparing the obtained results of continuous- and interrupted loading patterns. Continuous fatigue experiments were p ...

2018

Numerical simulation of two-dimensional crack propagation

Thomas Keller, Anastasios Vassilopoulos, Aida Cameselle Molares

A numerical investigation was carried out to simulate the experimental results previously obtained concerning two-dimensional in-plane crack propagation in laminated glass fiber-reinforced polymer (GFRP) plates. The plates were designed with an embedded ci ...

2018

Thermo-mechanical stability of lightweight glass-free photovoltaic modules based on a composite substrate

Christophe Ballif, Laure-Emmanuelle Perret Aebi, Alessandro Francesco Aldo Virtuani, Hengyu Li, Valentin Chapuis, Ana Cristina Oliveira Martins

Lightweight PV modules are attractive for building-integrated photovoltaic (BIPV) applications, especially for renovated buildings, where the additional load bearing capacity is limited. This work focuses on the development of a lightweight, glass-free pho ...

ELSEVIER SCIENCE BV2018