Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Chromium

Related publications (30)

Microstructure - Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films

Roberto Cestaro

This Thesis provides a comprehensive and correlative investigation of the microstructure, chemical state, and electrochemical reactivity of manganese oxide (MnOx) films, aiming to gain a deeper understanding of the deposition and dissolution mechanism of M ...

EPFL2024

Spinel Protective Coatings for Solid Oxide Cell (SOC) Interconnects (ICs)

Samaneh Daviran

Abstract The degradation of metal interconnects (ICs) in Solid Oxide Cells (SOCs) primarily results from chromium (Cr) oxide scale growth on stainless-steel substrates, causing ohmic loss and air-side electrode poisoning by Cr. This thesis addresses these ...

EPFL2024

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

Roland Logé

The microstructure evolution associated with the cold forming sequence of an Fe-14Cr-1W-0.3Ti-0.3Y2O3 grade ferritic stainless steel strengthened by dispersion of nano oxides (ODS) was investigated. The material, initially hot extruded at 1100 degrees C an ...

MDPI2024

Zinc carboxylate optimization strategy for extending Al-air battery system's lifetime

Andreas Züttel, Liping Zhong, Thi Ha My Pham, Manhui Wei

Although Al-air batteries are expected to be the candidates for energy conversion systems in renewable energy market due to the higher energy density, richer reserves, and lighter mass of Al metal, the anode self-discharge is seen as a notorious issue that ...

ELSEVIER SCI LTD2023

Effect of chromium content on microstructural evolution of CoNiAlW superalloy

Cyril Cayron

Effects of chromium (Cr) content on types and morphologies of various phases of a newly developed Co-Ni-Al-W superalloy (Co-30Ni-6W-9Al-3Ti-1Ta) have been investigated in this study. Microstructural examinations were carried out by field-emission scanning ...

SPRINGER HEIDELBERG2022

Assessing Analytical Methods for the Rapid Detection of Lead Adulteration in the Global Spice Market

Meret Aeppli

Lead adulteration of spices, primarily via Pb chromate compounds, has been documented globally as a growing public health concern. Currently, Pb detection in spices relies primarily on expensive and time-consuming laboratory analyses. Advancing rapid Pb de ...

AMER CHEMICAL SOC2022

Evaluation of inkjet-printed spinel coatings on standard and surface nitrided ferritic stainless steels for interconnect application in solid oxide fuel cell devices

Manuel Bianco

Inkjet printing technology was employed for the application of protective layer coatings in SOFC metallic interconnects. Aqueous-based spinel coatings were inkjet-printed on standard and surface nitrided K41 ferritic stainless-steel substrates. Inkjet-prin ...

ELSEVIER SCI LTD2022

Dual-function engineering to construct ultra-stable anodes for potassium-ion hybrid capacitors: N, O-doped porous carbon spheres

Kangning Zhao, Yanan Chen

Heteroatom doping engineering is deemed to be an adoptable strategy to boost the potassium (K) storage performance of carbonaceous materials. The inevitable issue for this strategy lies in the huge volume expansion originated from the large radius of K+. I ...

Elsevier2022

Dosimetry modeling and experimental validation for the PETALE program in the CROCUS reactor

Andreas Pautz, Vincent Pierre Lamirand, Pavel Frajtag, Axel Guy Marie Laureau

The PETALE experimental program in the CROCUS reactor intends to provide integral measurements on reactivity worth and dosimetry measurement to constrain nuclear data relative to stainless steel heavy reflectors. The experimental setup consists in eight su ...

2021

APT/TEM characterization of the element segregation in ferritic/martensitic steels after irradiation in SINQ

Lijuan Cui

Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...

EPFL2021

Four years of daily stable water isotope data in stream water and precipitation from three Swiss catchments

Jana Freiin von Freyberg

This dataset contains four years of daily measurements of the natural isotopic composition (2H, 18O) of precipitation and stream water at the Alp catchment (area 47 km2) in Central Switzerland and two of its tributaries (0.7 km2 and 1.6 km2). In addition, ...

Zenodo2021

Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels

Roland Logé

Two new ferrito-martensitic oxide dispersion strengthened (ODS) steels reinforced with (Y, Ti, O) nanoparticles were elaborated using a high-energy attritor. The milled powder was consolidated by hot extrusion at 1050 degrees C. The two types of ODS steels ...

ELSEVIER SCI LTD2021

Direct Visualization of Atomic-Scale Heterogeneous Structure Dynamics in MnO2 Nanowires

Kangning Zhao

Manganese oxides are attracting great interest owing to their rich polymorphism and multiple valent states, which give rise to a wide range of applications in catalysis, capacitors, ion batteries, and so forth. Most of their functionalities are connected t ...

AMER CHEMICAL SOC2021

In Situ Biostimulation of Cr(VI) Reduction in a Fast-Flowing Oxic Aquifer

Rizlan Bernier-Latmani, Daniel Scott Alessi

Hexavalent chromium is among the most common and hazardous inorganic contaminants in soils and groundwater. A promising in situ bioremediation approach is the delivery of electron donors to stimulate microbially mediated Cr(VI) reduction, producing relativ ...

AMER CHEMICAL SOC2020

Shape Engineering of Metal-Organic Frameworks via MOF@Polymer Composite Fabrication

Bardiya Valizadeh

Metal-organic frameworks (MOFs) are a fascinating class of porous materials that have become the subject of research owing to their unique characteristics such as high surface areas, low densities, and structural tunability. Recently, the research has been ...

EPFL2020

Stainless steel-like FeCrNi nanostructures via electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte

Enrico Bertero

Electrodeposition of stainless steel-like materials such as FeCrNi alloy into micro- and nanotemplates provides a sustainable framework for creating biomedical-oriented micro- and nanocomponents with outstanding characteristics. While Cr(III)-based electro ...

2020

Delivery of a Masked Uranium(II) by an Oxide-Bridged Diuranium(III) Complex

Marinella Mazzanti, Farzaneh Fadaei Tirani, Chad Thomas Palumbo, Dieuwertje Katelijn Modder

Oxide is an attractive linker for building polymetallic complexes that provide molecular models for metal oxide activity, but studies of these systems are limited to metals in high oxidation states. Herein, we synthesized and characterized the molecular an ...

Wiley-VCH Verlag GmbH2021

Fretting-corrosion behavior of electroless Ni-P/Ni-P-TiO2 coatings obtained on AZ91D magnesium alloy by a chromium-free process

Stefano Mischler, Angela Bermudez Castañeda

Ni-P electroless coatings are widely applied for protection of magnesium alloys and other materials due to the low energy consumption of the process and high resistance to corrosion and wear, properties that can be improved with the incorporation of partic ...

ELSEVIER2020

Essential role of oxygen vacancies of Cu-Al and Co-Al spinel oxides in their catalytic activity for the reverse water gas shift reaction

Ursula Röthlisberger, Jeremy Luterbacher, Oliver Kröcher, Pascal Alexander Schouwink, Florent Emmanuel Héroguel, Alimohammad Bahmanpour, Christophe Jean Baranowski, Murat Kiliç

CO2 catalytic hydrogenation to CO will likely be an important part of CO2 mitigation and valorization processes. Recently, we have developed materials containing surface-formed Cu-Al spinel that act as active and stable catalysts for this reaction. Here, t ...

2020

Chromium bioavailability in aquatic systems impacted by tannery wastewaters. Part 1: Understanding chromium accumulation by indigenous chironomids

Dominik Józef Kubicki

The tanning industry uses large quantities of Cr whose contribution to the contaminant burden of aquatic organismsis not yet fully understood. The present study investigated Cr bioaccumulation by indigenous chironomids in a freshwater ecosystem impacted by ...

2019