Karen ScrivenerDe nationalité anglaise, Karen Scrivener est née en 1958. Au cours de sa carrière, ses travaux et sa recherche traitaient des domaines suivants: Identification du développement microstucturale pendant l'hydratation du ciment. Elaboration d'une approche multitechnique pour étudier la microstucture des ciments et bétons, avec accent sur la quantification par analyse des images d'électrons retrodiffusés. Caractérisation de l'auréole de transition de la pâte de ciment autour des granulats. Compréhension des processus de dégardation des bétons, en particulier le gonflement lié à la formation de l'éttringite retardée dans les bétons étuvés.
Mathieu LemayTeaching & PhD Past EPFL PhD Students as codirector Martin Proença Courses Applied biomedical signal processing EE-512 The goal of this course is twofold: (1) to introduce physiological basis, signal acquisition solutions (sensors) and state-of-the-art signal processing techniques, and (2) to propose concrete examples of applications for vital sign monitoring and diagnosis purposes.
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Olivier Claude Martin FévrierTeaching & PhD PhD Students Benjamin Yong Kwak Brown, Massimo Carpita, Garance Durr-Legoupil-Nicoud, Alysée Khan, Riccardo Ian Morgan Courses Nonlinear dynamics, chaos and complex systems PHYS-460 The course provides students with the tools to approach the study of nonlinear systems and chaotic dynamics. Emphasis is given to concrete examples and numerical applications are carried out during the exercise sessions.
Wim de MalscheTeaching & PhD Courses Microfluidics for lab-on-a-chip MICRO-706 The course covers the entire field of lab-on-a-chip technology, including microfluidic principles and various microfabrication approaches, and presenting concrete examples of devices for (bio)analysis, cell biology, tissue regeneration and microreactors.
Julie Nathalie S GheysenProfessionals experiences PhD student 2018–2022 Université Catholique de Louvain
Teaching & PhD Courses Materials MSE-171 Introduction course of material science applied to usual building materials, especially concrete and metals. Description of their fabrication, mechanical and thermal properties and use in construction. Mechanical behaviour of materials MSE-234 This course provides an introduction to the mechanical behaviour, the processing, the structure and life-cycle o
David Michael Volpe RuggieroTeaching & PhD PhD Students Ömer Faruk Behçet, Elias Merhi, Enrico Pinelli, Ahmad Abdulrahman Ahmad Majdouba, Muhammad Mahmood Mohi Ud Din Courses Reinforced concrete structures CIVIL-323 This course introduces the student to the behaviour and design of reinforced concrete structures. The student will learn the principles of analysis of reinforced concrete and how to design common concrete elements including columns, beams, and slabs. Reinforced concrete structures - advanced topics
David Carlos Fernandez-Ordoñez HernandezExpertise
Construction.Structures.Concrete.Prefabrication.History of Construction.
Teaching & PhD Courses Design of precast concrete structures CIVIL-414 The course deals with the design of precast reinforced concrete structures, both for bridges and for buildings. The course is focused in learning by projects supplemented by some lectures by the teachers.The students will work in groups to design a precast structure. Drawing structures CIVIL-126 The Drawing Structures I wil
Patricia GuaitaExpertise
pedagogy of makingdrawing as an actionmultidisciplinary projectsdesign methodologies in 1:1 fabricationexperiential learning processesknowledge transfer with the Global Southdiversity and care
Patricia Guaita is an architect, researcher, and educator with expertise in drawing as an action and social and sustainable research projects. Her work focus on design methodologies, which incorporate drawing by hand, 1:1 fabrication, spatial and tectonic analysis, and the development of construction protoco
Tara HabibiCurrent Work
SafeShore ProjectPrincipal Investigator Climate change will lead to significant sea level rise and more frequent, intense storm surges. These developments pose severe risks to coastal regions, threatening human lives, cultural heritage, and economic stability. Conventional shoreline protection methods, such as seawalls and armour blocks, have proven effective. However, their reliance on heavy concrete makes them slow to construct and environmentally unsustainable. To address these challenges, t
Véronique MichaudBackground:
1994 Habilitation à diriger des recherches ( INPG, France)
1991 PhD in Materials Engineering ( MIT, USA)
1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France)
Activities:
Since January 2018: Associate Dean of Engineering, in charge of Education
June 2012-Dec.2017: Head of the Materials Science and Engineering Section
Since April 2017: Associate Professor at EPFL
2009-2017 : Professeur Titulaire at EPFL
1997-2009: Researcher at EPFL
1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France)
1991-1994 : Post-doctoral research associate, MIT (USA)
Author of about 300 publications of which 140 in peer-reviewed journals
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Stefana ParaschoTeaching & PhD PhD Students Jingwen Wang, Gabriel Vallat, Maxence Grangeot, Eleni Maria Skevaki, Wenqian Yang, Megi Sinani Courses Capitalizing on Uncertainty AR-809 SUMMER SCHOOL - Capitalizing on Uncertainty is a 6-day Summer school exploring uncertainty as a productive resource in design and fabrication through lectures, hands-on experiments, and the collaborative design and construction of a full-scale structure in a human-robot fabrication setting. Digital design and making: A criti
Filippo CattapanTeaching & PhD Courses UE V : Visions and utopias AR-523 The teaching unit will take the form of an operational workshop in which the visionary and abstract spirit proposed by utopian literature will find a concrete urban form by composing fragments sought from the vast figurative repertoire offered by the history of architecture.
Katrin BeyerSince 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory
2010-2017 Assistant Professor, EPFL.
2008-2010 Post-doctoral researcher, ETH Zürich.
2003-2007 Ph.D., Roseschool / Università di Pavia, Italy.
2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London.
2001 Diploma, Civil engineering, ETH Zürich.
Duccio TestaProfessionals experiences Supply teacher of mathematics, physics and computing 1994–1995 various high schools in Torino (Italy)
Teaching & PhD Past EPFL PhD Students as codirector Theodoros Panis, Lorenzo Stipani Courses Sustainable energy innovation HUM-292 This course provides an introduction to the technical, social, and economic fundamentals of energy. The course examines the concrete case of nuclear fusion. How could this energy reshape our world? How can we ensure its acceptability, st
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Giovanni De CesareExpertise
Numerical simulation and physical modeling of hydraulic works and schemes; reservoir sedimentation and turbidity currents; reservoir sediment management; Ultrasonic Doppler flow measurement; river training work and restoration; soil bioengineering and nature based solutions; fluvial eco-morphology; rapid transients in pressurized waterways; technology transfer, commissioned studies and expert reports in applied hydraulics, hydraulic constructions and infrastructures; organization of continuous edu
