Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Metal casting

Related publications (27)

A semantic model-based systems engineering approach for assessing the operational performance of metal forming process

Dimitrios Kyritsis, Jinzhi Lu

Metal Forming is a basic and essential industrial process to provide materials for constructing complex products. To design an efficient metal forming process, the functional requirements and operational performance are two important aspects to be consider ...

Pergamon-Elsevier Science Ltd2024

All-Dielectric Nanophotonic via Glass Fluid Instabilities

Pierre-Luc Eloi Piveteau

In this thesis work, we propose to exploit an innovative micro/nano-fabrication process, based on controlled fluid instabilities of a thin viscous film of chalcogenide glass. Amorphous selenium and arsenic triselenide were used in this thesis work, and com ...

EPFL2024

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

Bringing casting to microfabrication: processing and deformation of microcastings

Luciano Borasi

This work extends the range of pathways for the production of metallic microcomponents by downscaling metal casting. This is accomplished by using either of two different molding techniques, namely femtosecond laser micromachining or lithographic silicon m ...

EPFL2023

A systemic study for enhanced waste heat recovery and renewable energy integration towards decarbonizing the aluminium industry

François Maréchal, Daniel Alexander Florez Orrego

The aluminium remelting industry relies on natural gas to transform recycled aluminium into aluminium feedstock, entailing significant atmospheric emissions. Hydric resources are also affected as they are used as sinks of waste heat from the casting proces ...

2023

A multi-material robotic finger with integrated proprioceptive and tactile capabilities produced with a circular process

Josephine Anna Eleanor Hughes, Kai Christian Junge, Antonia Georgopoulou Papadonikolaki

When developing or designing biomimetic robotic fingers with rigid and soft components and integrated sensors, fabrication is often a bottle-neck when assembling and casting processing techniques are used. This study introduces a thermoplastic multi-materi ...

IEEE2023

Photocured Nanocellulose Composites: Recent Advances

Yves Leterrier, Aigoul Schreier, Mohammed Arif Poothanari

This perspective gives an overview of recent progress in thefield of photocured polymer composites based on variousforms of nanocelluloses, with a focus on cellulose nanofibrils. The manufacturing processes and performances of these nanocellulosecomposites ...

AMER CHEMICAL SOC2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Processability, microstructure and precipitation of a Zr-modified 2618 aluminium alloy fabricated by laser powder bed fusion

Christian Leinenbach, Xavier Maeder

Additive manufacturing offers the opportunity to produce complex geometries from novel alloys with improved properties. Adapting conventional alloys to the process-specific properties can facilitate rapid implementation of these materials in industrial pra ...

2022

Development of stencil lithography for stretchable interconnects

Yi-Chiang Sun

The growing needs for human healthcare have driven the development of wearable devices for monitoring the health status of an individual. Polymers represent a promising platform for such devices due to their ability to form an intimate contact between soft ...

EPFL2022

Deep learning accelerated prediction of the permeability of fibrous microstructures

Véronique Michaud, Baris Çaglar, Guillaume Clément Broggi

Permeability of fibrous microstructures is a key material property for predicting the mold fill times and resin flow path during composite manufacturing. In this work, we report an efficient approach to predict the permeability of 3D microstructures from d ...

2022

Ultra-Compact Ka-band Metamaterial Waveguide Filters, Fabricated by Lost-Wax Casting

Romain Christophe Rémy Fleury, Maliheh Khatibi Moghaddam

This paper proposes a novel technique for the design of miniaturized Ka-band filters based on locally resonant metamaterials (LRMs), which are fabricated monolithically using lost wax casting. We implement ultra-small metamaterial filters by exploiting a n ...

IEEE2021

Microstructure Selection in Laser Remelted Fe-C-Si Alloys

Wilfried Kurz

Laser surface remelting at various velocities has been employed to study the selection of microstructures of high-purity Fe-C-Si alloys containing nominally 3.2 to 4.2 wt.% C and 1 to 3 wt.% Si. The microstructure of the remelted region consisted of metast ...

WALTER DE GRUYTER GMBH2021

Centre National d'Art et de Culture Georges Pompidou: Monument National e Live Centre of Information. Cronache di idea, progetto e fabbricazione, 1968-1977

Boris Hamzeian

The Centre Beaubourg of Paris, now known as the Centre National d'Art et de Culture Georges Pompidou, conceived by Piano+Rogers Architects and Ove Arup & Partners, between 1971 and 1977, represents one of the rare synthesis of the architectural, constructi ...

EPFL2021

Numerical Model of Rapidly Solidified Droplets of Al-33 Wt Pct Cu Eutectic Growth

Michel Rappaz, Jonas Valloton

Rapid solidification of Al-Cu droplets of eutectic composition was carried out using Impulse Atomization (a type of drop tube). Two distinct morphologies were observed: an irregular undulated eutectic assumed to form during recalescence, followed by a regu ...

SPRINGER2022

On the compressive and bond strength of reinforced concrete as structural properties

Francesco Rafael Alberto Moccia

Traditionally, the concrete strength is measured on cubes or cylinders having normalized dimensions, suitable vibration and curing conditions and their strength is assessed in laboratory under fast loading rates. However, the in-situ strength of structural ...

EPFL2021

Simulating Mold Risks under Future Climate Conditions

Tobias Kippenberg, Junqiu Liu, Rui Ning Wang, Johann Emmeram Riemensberger, Wenle Weng, Jijun He, Anat Siddharth, Viacheslav Snigirev

This research tests the potential susceptibility of a prevalent, residential, wall assembly to the risk of sustained mold-growth in predicted future climate conditions. Here, the authors demonstrate a methodology that combines hygrothermal and mold-growth ...

IEEE2021

The influence of casting position and disturbance induced by reinforcement on the structural concrete strength

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Rafael Alberto Moccia

It is well known that control specimens used to assess the concrete strength of new structures have different casting and curing conditions than those of actual structures. Notably, after pouring of the concrete and before its hardening, a number of phenom ...

ERNST & SOHN2021

Influence of Minor Cr Additions on Crystal Growth in Rapidly Solidified Al-20Zn Alloys

Michel Rappaz

It has been discovered quite recently that Icosahedral Short-Range Order (ISRO) of atoms in the liquid phase of metallic alloys surrounding some trace elements added to the melt can influence both the nucleation and growth of the primary phase. In this wor ...

2020

A Contribution to the Design of Textile Reinforced Concrete Structures

Patrick Lorenzo Valeri

The reduction of green-house gas emissions is one of the global challenges that our society is facing and the production of cement plays a major role because concrete is the most used material worldwide. For every 1000 kg of cement produced, 900 kg of CO2, ...

EPFL2020