Sergey ShevchikTeaching & PhD PhD Students Golnoosh Abdollahinejad Courses Materials processing with intelligent systems MICRO-457 Repeatability in laser material processing is challenging due to high-speed dynamics. To address this issue, the course provides an overview of laser theory, laser-material interaction, various types of sensors (acoustic & optic), data acquisition, online monitoring, and control via machine learning
Demetri PsaltisResearch group
Teaching & PhD PhD Students Victoria Fay, Colin Nikhil Christian Past EPFL PhD Students Wuzhou Song, Alexandre Goy, Julien Cuennet, Ioannis Papadopoulos, Xin Yang, Grégoire Pierre Jean Laporte, Thomas Jean Victor Marie Lanvin, Seyyed Mohammad Hosseini Hashemi, Nicolino Stasio, Morteza Hasani Shoreh, Marilisa Romito, Pooria Hadikhani, Eirini Kakkava, Joowon Lim, Giulia Panusa, Ahmed Bassam Sayed Ayoub Mohamed Ayoub, Amirhossein Saba, Niyazi Ulas Dinç Past EPFL PhD
Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Guillaume AnciauxResearchResearch Topics My research can be decomposed in three main blocks:First, the main goal of my current research is the physical description of contact interactions. I performed numerous studies of this topic using different models from the continuum scale down to atomistic scale. Since atomic phenomena and macroscopic observations are linked, the physics of contact needs the simultaneous consideration of several scales. For instance, plasticity is a theory defined for the macroscopic scale whereas t
Valentin SimeonovResearchComplete publication list Valentin SimeonovCollaborateur scientifique- EPFL ENAC EFLUMList of publicationsRefereed 1. V. Mitev, V. Simeonov, and I. Grigorov, "Model experiment in measuring the temperature and concentration of water vapours in air by spontaneous Raman scattering", Bulg. J. Phys. 9, No 5, pp. 549-558, (1982)2. V. Mitev, V. Simeonov, and I. Grigorov, ”Atmospheric gases temperature measurements by pure rotational Raman scattering”, Russian Journal of Applied Spectroscopy, 39,
Dario FloreanoProf. Dario Floreano is director of the Laboratory of Intelligent Systems at the Swiss Federal Institute of Technology Lausanne (EPFL). Since 2010, he is the founding director of the Swiss National Center of Competence in Robotics, a research program that brings together more than 20 labs across Switzerland. Prof. Floreano holds an M.A. in Vision, an M.S. in Neural Computation, and a PhD in Robotics. He has held research positions at Sony Computer Science Laboratory, at Caltech/JPL, and at Harvard University. His main research interests are Robotics and A.I. at the convergence of biology and engineering. Prof. Floreano made pioneering contributions to the fields of evolutionary robotics, aerial robotics, and soft robotics. He served in numerous advisory boards and committees, including the Future and Emerging Technologies division of the European Commission, the World Economic Forum Agenda Council, the International Society of Artificial Life, the International Neural Network Society, and in the editorial committee of several scientific journals. In addition, he helped spinning off two drone companies (senseFly.com and Flyability.com) and a non-for-profit portal on robotics and A.I. (RoboHub.org). Books
Manuale sulle Reti Neurali, il Mulino (in Italian), 1996 (first edition), 2006 (second edition)Evolutionary Robotics, MIT Press, 2000
Bio-Inspired Artificial Intelligence, MIT Press, 2008
Flying Insects and Robots, Springer Verlag, 2010
Alejandro Roda BuchExpertise
TribologyContact Mechanics ModelingData AcquisitionDynamics of Mechanical SystemsData Science
Alejandro Roda Buch is Assistant Professor at the Universitat Politècnica de València (UPV, Spain) in the Mechanical and Material Engineering Department. Currently he spends a sabbatical period at EPFL. He has a master degree in Industrial Engineering (Mechanical Engineering specialization) and a PhD in Railway Contact Mechanics (2006) from UPV. He conducted two Postdoctoral researches at EPFL (2006 and 2
Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Mohamed FarhatM. Farhat was born in Casablanca in 1962 (Moroccan citizen). He graduated at Ecole Nationale Supérieure d'Hydraulique et de Mécanique de Grenoble (France. He joined The LMH laboratory in 1986 as research assistant. He completed in 1994 a Ph.D. thesis on Cavitation. He joined the R&D department of Hydro-Quebec in Montréal (Canada) in 1995 where he was in charge of several research projects in the areas of production and transportation of hydropower and mainly the monitoring of large hydro turbines. Since 2001, he is senior scientist at the LMH laboratory, head of the cavitation group. He is also lecturer in Master and Doctoral programs. He is member of the Doctoral Committee in Mechanics.
Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Christophe MoserDr. Christophe Moser is
Associate Professor of Microengineering and Industrial Relations
at the Swiss Federal Institute of Technology in Lausanne. He was the co-founder and CEO of
Ondax,Inc
for ten years prior to joining EPFL. During this decade, he raised $15 million from corporate and venture capital sources to fund volume production of thick holographic components in glass and develop devices enabled by these components such as tunable add-drop multiplexers for telecommunications, ultra-narrowband notch filters for low frequency Raman systems, high power semi-conductor frequency-narrowed pumps for fiber lasers, single frequency fixed and tunable lasers for sensing and femtosecond pulse compressors for micro-machining applications. Dr. Moser has a Ph.D. in Electrical Engineering from the California Institute of Technology, a minor in finance and a bachelor degree in Physics from EPFL.
He is the co-inventor of 24 patents, 14 peer reviewed scientific publications, 9 IEEE proceedings and a book chapter.
Private interests include tennis, running, ski, basketball and family excursions.
2010: Associate Professor, EPFL, faculty
Science Technique Ingenieur.
2000-2010: co-founder, CEO Ondax, Inc.
1995-2000: Graduate Research Assistant,
California Institute of Technology.
1993-1995: Engineering Project manager ,
TESA.
1988-1993: Bachelor candidate in Physics, EPFL.
MAIN PUBLICATIONS:
Moser C., Havermeyer F,.Ultra-narrowband tunable laserline notch filter, Appl. Phys. B, 95 (3), pp 597-601, 2009.
Moser C. ,Ho L., Havermeyer F,. Self-aligned Non-dispersive External Cavity Tunable Laser, 16 (21), 16691-16696 Optics Express, 2008.
Steckman, GJ , Moser C. et al. Volume holographic grating wavelength stabilized laser diodes, IEEE J. Of Selected Topics in Quantum Electronics, (13), 672-678, 2007.
Buse K, Havermeyer F, Liu W., Moser C, Psaltis D. Holographic Filters , Book Chapter Photorefractive Materials and their Applications, 2005.
Havermeyer, F; Liu, WH; Moser, C, et al. Volume holographic grating-based continuously tunable optical filter , Opt. Eng. 43 (9), 2017-2021, 2004.
Moser C., Maravic I., Schupp B., Adibi A, Psaltis D, Diffraction efficiency of localized holograms in doubly doped LiNbO3 crystals, Opt. Lett. 25: (17),1243-1245, 2000. Nadine BalucTeaching & PhD Past EPFL PhD Students Emmanuelle Giacometti, Raluca Schibli, Gang Yu, Bin Long, Lyubomira Veleva
Marcel DrabbelsDr. Marcel Drabbels studied experimental physics at the University of Nijmegen (the Netherlands) and in 1993 obtained his Ph.D. at that same university. He then moved to the University of California at Santa Barbara where he studied the dynamics of highly vibrationally excited molecules and developed a new detection technique to investigate the photodissociation of molecules. When he returned to the Netherlands in 1996 he joined the FOM Institute for Atomic and Molecular Physics in Amsterdam where he worked on the development of new types of infrared imaging and streak cameras. In 1997 Dr. Drabbels was awarded a fellowship of the Royal Dutch Academy of Sciences and he moved to the Free University of Amsterdam where he studied the collision dynamics of molecules and initiated photodissociation experiments using ultrafast lasers. In October 1998 he was appointed as senior scientist at the EPFL where he studies the spectroscopy and dynamics of nanoscale systems. In March 2021 he was promoted to titular professor.
Marco PicassoExpertise
Computational Science and Engineering
Mission
I am teaching analysis and numerical analysis for engineers and mathematicians at bachelor and master levels.My research pertains to the numerical simulation of complex physical systems with partial differential equations.Here is some bibliometry: Google Scholar, Research Gate, Orcid, here is my most recent CV. Ongoing research projects: - Numerical simulation of aluminium electrolysis, collaboration with RioTinto LRF lab, Ycoorsystems SA and Jacques
Simon Nessim HeneinBorn in 1973 and of Egyptian-Swiss nationality, Simon Henein grew up in Cairo. He obtained an engineering degree at the Ecole Polytechnique Fédérale de Lausanne (EPFL) in 1996 and went on to complete his doctorate at the EPFL in 2000. In 2001, he published the book “Conception des guidages flexibles” which has become a reference in precision engineering. He then joined the Centre Suisse d’Electronique et Microtechnique (CSEM), Neuchatel, Switzerland, where he conceived and developed mechanisms for robotic, aerospace, medical and watchmaking applications. He pursued his research career at the Paul Scherrer Institute, Villigen, Switzerland, where he developed instruments for the Swiss Light Source Synchrotron (SLS). Since November 1st, 2012, he is associate professor in microengineering at the EPFL, holder of the Patek Philippe Chair and director of the Micromechanical and horological design laboratory (Instant-Lab).
Yves BellouardDr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website
Eric BoillatContact Microcity
Phone: 41 21 69 54456
Teaching & PhD Past EPFL PhD Students as codirector Serguei Kolossov, Cédric André, Jamasp Jhabvala, Christoph Van Gestel, Tatiana Polivnikova, Nikola Kalentics Courses Industrial production processes ME-212 Application windows of the main manufacturing process categories. Implementation of simple models describing the behavior of the main manufacturing processes. Basic understanding of the economic aspects of production processes. Manufacturing proc
Anna Fontcuberta i Morral2014 Associate Professor at the Institut des Matériaux, EPFL
2008 Assistant Professor Tenure Track at the Institut des Matériaux, EPFL
2009 Habilitation in Physics, Technische Universität München
2005-2010 Marie Curie Excellence Grant Team Leader at Walter Schottky Institut, Technische Universität München, on leave from Centre National de la Recherche Scientifique (CNRS, France)
2004-2005 Visiting Scientist at the California Institute of Technology, on leave from CNRS; Senior Scientist and co-founder of Aonex Technologies (a startup company for large area layer transfer of InP and Ge on foreign substrates for the main application of multi-junction solar cells)
2003 Permanent Research Fellow at CNRS, Ecole Polytechnique, France
2001-2002 Postdoctoral Scholar at the California Institute of Technology
Study of wafer bonding and hydrogen-induced exfoliation processes for integration of mismatched materials in views of photovoltaic applications
Sponsor: Professor Harry A. Atwater
1998-2001 PhD in Materials Science, Ecole Polytechnique
Study of polymorphous silicon: growth mechanisms, optical and structural properties. Application to Solar Cells and Thin Film Transistors
Advisor: Pere Roca i Cabarrocas
1997-1998 Diplôme dEtudes Approfondis (D.E.A.) in Materials Science at Université Paris XI, France .
1993-1997 BA in Physics at Universitat de Barcelona
