Publications related to Strouhal number

Related publications (25)

Instability and trajectories of buoyancy-driven annular disks: A numerical study

We investigate the stability of the steady vertical path and the emerging trajectories of a buoyancy -driven annular disk as the diameter of its central hole is varied. The steady and axisymmetric wake associated with the steady vertical path of the disk, ...

Amer Physical Soc2024

Adaptive Symplectic Model Order Reduction Of Parametric Particle-Based Vlasov-Poisson Equation

Jan Sickmann Hesthaven, Cecilia Pagliantini, Nicolò Ripamonti

. High-resolution simulations of particle-based kinetic plasma models typically require a high number of particles and thus often become computationally intractable. This is exacerbated in multi-query simulations, where the problem depends on a set of para ...

AMER MATHEMATICAL SOC2023

From thin plates to Ahmed bodies: linear and weakly nonlinear stability of rectangular prisms

Edouard Boujo, Giuseppe Antonio Zampogna

We study the stability of laminar wakes past three-dimensional rectangular prisms. The width-to-height ratio is set to W/H = 1.2, while the length-to-height ratio 1/6 < L/H < 3 covers a wide range of geometries from thin plates to elongated Ahmed bodies. F ...

Cambridge University Press2023

Scaling behavior of bedload transport: what if Bagnold was right?

Christophe Ancey

There is a paradox in the relationship between bedload transport rates and flow variables: laboratory and field studies have reported on how bedload transport rates depend on flow variables through a power law, but none of the empirical laws fitted to the ...

2023

Secondary structure of the human mitochondrial genome affects formation of deletions

Jacques Fellay, Konstantin Popadin

BackgroundAging in postmitotic tissues is associated with clonal expansion of somatic mitochondrial deletions, the origin of which is not well understood. Such deletions are often flanked by direct nucleotide repeats, but this alone does not fully explain ...

BMC2023

All you need is time to generalise the Goman-Khrabrov dynamic stall model

Karen Ann J Mulleners, Fatma Ayancik Cinoglu

Dynamic stall on airfoils negatively impacts their aerodynamic performance and can lead to structural damage. Accurate prediction and modelling of the dynamic stall loads are crucial for a more robust design of wings and blades that operate under unsteady ...

Cambridge University Press2022

UAV in the advent of the twenties: Where we stand and what is next

Jan Skaloud, Davide Antonio Cucci

The use of Unmanned Aerial Vehicles (UAVs) has surged in the last two decades, making them popular instruments for a wide range of applications, and leading to a remarkable number of scientific contributions in geoscience, remote sensing and engineering. H ...

2022

Robust design using multiobjective optimisation and artificial neural networks with application to a heat pump radial compressor

Jürg Alexander Schiffmann, Soheyl Massoudi, Cyril Picard

Although robustness is an important consideration to guarantee the performance of designs under deviation, systems are often engineered by evaluating their performance exclusively at nominal conditions. Robustness is sometimes evaluated a posteriori throug ...

2022

Growth, timing, & trajectory of vortices behind a rotating plate

Diego Francescangeli

The presence of aerodynamic vortices is widespread in nature. They can be found at small scales near the wing tip of flying insects or at bigger scale in the form of hurricanes, cyclones or even galaxies. They are identified as coherent regions of high vor ...

EPFL2022

Data-based model maintenance in the era of industry 4.0: A methodology

Dimitrios Kyritsis, Foivos Psarommatis Giannakopoulos

Despite the high number of investments for data-based models in the expansion of Industry 4.0, too little effort has been made to ensure the maintenance of those models. In a data-streaming environment, data-based models are subject to concept drifts. A co ...

ELSEVIER SCI LTD2022

Directional Cross-Correlation for Improved Aberration Phase Estimation in Pulse-Echo Speed-of-Sound Imaging

Jean-Philippe Thiran, Samuel Denys Beuret, Simon Canales

There has been a recent surge in methods targeting the recovery of a speed-of-sound map from pulse-echo ultrasound measurements. We focused in this work on a particular technique and identified a drawback shared by similar methods - namely the necessity of ...

IEEE2021

Experimental Characterization of Additively Manufactured Metallic Heat Exchangers

Mahbod Heidari

In this study, three manifold-microchannel heat exchangers were additively manufactured by direct metal laser sintering. The heat exchangers were manufactured from stainless steel (SS17-4) with an overall dimension of 64.2 x 46.0 x 27.1 mm. The thermal and ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Counting using deep learning regression gives value to ecological surveys

Devis Tuia, Benjamin Alexander Kellenberger

Many ecological studies rely on count data and involve manual counting of objects of interest, which is time-consuming and especially disadvantageous when time in the field or lab is limited. However, an increasing number of works uses digital imagery, whi ...

Nature Research2021

Scaling of the translational velocity of vortex rings behind conical objects

Karen Ann J Mulleners, Guillaume de Guyon-Crozier

Ring vortices are efficient at transporting fluid across long distances. They can be found in nature in various ways: they propel squids, inject blood in the heart, and entertain dolphins. These vortices are generally produced by ejecting a volume of fluid ...

2021

Geometric mixing

Nicolas Piro Mastracchio

Mixing fluids often involves a periodic action, like stirring one's tea. But reciprocating motions in fluids at low Reynolds number, in Stokes flows where inertia is negligible, lead to periodic cycles of mixing and unmixing, because the physics, molecular ...

ROYAL SOC2020

Investigation of the symmetry-breaking instability in a T-mixer with circular cross section

Lorenzo Siconolfi

This paper investigates the laminar flow inside a T-mixer composed of three pipes with a circular cross section. The flow enters the mixer symmetrically from the two aligned pipes and leaves the device from the third pipe. In similar devices, but involving ...

AMER INST PHYSICS2020

Modeling turbulent stream flows over rough permeable beds

Christophe Ancey, Ivan Pascal, Gauthier Paul Daniel Marie Rousseau

In steep streams, turbulent flows run over coarse sediments that are similar in size to flow depth. Under these conditions, a significant part of the flow may seep through the permeable bed. Based on experimental data, this paper presents a model able to r ...

CRC Press2020

DISK: learning local features with policy gradient

Pascal Fua, Eduard Trulls Fortuny, Michal Jan Tyszkiewicz

Local feature frameworks are difficult to learn in an end-to-end fashion, due to the discreteness inherent to the selection and matching of sparse keypoints. We introduce DISK (DIScrete Keypoints), a novel method that overcomes these obstacles by leveragin ...

2020

Influence of Large Relative Tip Clearances for a Micro Radial Fan and Design Guidelines for Increased Efficiency

Jan Van Herle, Jürg Alexander Schiffmann, Patrick Hubert Wagner

The blade tip clearance loss was studied experimentally and numerically for a micro radial fan with a tip diameter of 19:2mm. Its relative blade tip clearance, i.e., the clearance dividedby the blade height of 1:82mm, was adjusted with different shims. The ...

2021

Fast assembly of Galerkin matrices for 3D solid laminated composites using finite element and isogeometric discretizations

Pablo Antolin Sanchez

This work presents a novel methodology for speeding up the assembly of stiffness matrices for laminate composite 3D structures in the context of isogeometric and finite element discretizations. By splitting the involved terms into their in-plane and out-of ...

2020