Publications related to Liquid-propellant rocket

Related publications (27)

Stick-slip-to-stick transition of liquid oscillations in a U-shaped tube

François Gallaire, Alessandro Bongarzone

The nonlinear decay of oscillations of a liquid column in a U-shaped tube is investigated within the theoretical framework of the projection method formalized by Bongarzone et al. [Chaos 31, 123124 (2021)]. Starting from the full hydrodynamic system supple ...

Amer Physical Soc2024

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

Umar Sheikh, Haomin Sun, Mengdi Kong, Cristian Sommariva

The pre-thermal quench (pre-TQ) dynamics of a pure deuterium ( D 2 ) shattered pellet injection (SPI) into a 3 MA / 7 MJ JET H-mode plasma is studied via 3D non-linear MHD modelling with the JOREK code. The interpretative modelling captures the overall evo ...

IOP Publishing Ltd2024

Design, computational and experimental investigation of a small-scale turbopump for organic Rankine cycle systems

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

The hydraulic design, computational analysis, and experimental investigations of a high-speed small-scale turbopump for mobile waste heat recovery applications based on organic Rankine cycle systems are presented in this paper. Such applications demand hig ...

Elsevier2023

Super-harmonically resonant swirling waves in longitudinally forced circular cylinders

François Gallaire, Alessandro Bongarzone, Alice Evelyne Julienne Marcotte

Resonant sloshing in circular cylinders was studied by Faltinsen et al. (J. Fluid Mech., vol. 804, 2016, pp. 608-645), whose theory was used to describe steady-state resonant waves due to a time-harmonic container's elliptic orbits. In the limit of longitu ...

Cambridge University Press2023

Covariant formulation of relativistic mechanics

Miguel Alexandre Ribeiro Correia

Accretion disks surrounding compact objects, and other environmental factors, deviate satellites from geodetic motion. Unfortunately, setting up the equations of motion for such relativistic trajectories is not as simple as in Newtonian mechanics. The prin ...

American Physical Society2022

Design of an intake and a thruster for an atmosphere-breathing electric propulsion system

Thomas Binderup Jensen, Francesco Romano

Challenging space missions include those at very low altitudes, where the atmosphere is the source of aerodynamic drag on the spacecraft, that finally defines the mission's lifetime, unless a way to compensate for it is provided. This environment is named ...

2022

Unmoderated molten salt reactors design optimisation for power stability

Andreas Pautz, Axel Guy Marie Laureau

The critical region of unmoderated molten salt reactors consists in a cavity filled with a liquid fuel. The lack of internal structure implies a complex flow structure of the circulating fuel salt. A preliminary core shape optimization has been performed d ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Re-entry analysis of critical components and materials for design-for-demise techniques

Pénélope Leyland, Stefano Mischler, Seong-Hyeon Park

The concern caused by the rising population of space debris has increased. One of the recommended mitigation measures is the safe re-entry disposal either in a controlled or uncontrolled manner. Performing a controlled re-entry, where the spacecraft is gui ...

2021

Direct conversion of plastic materials into methane and liquid fuels

Paul Joseph Dyson, Felix Daniel Bobbink, Antoine Philippe Van Muyden, Wei-Tse Lee

The invention relates to a method for direct conversion of plastic materials into methane and/or liquid fuel and use of ruthenium-modified zeolite to catalyse this conversion. ...

2020

Atomic Layer Deposition of ZnO on CuO Enables Selective and Efficient Electroreduction of Carbon Dioxide to Liquid Fuels

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ulf Anders Hagfeldt, Jingshan Luo, Dan Ren, Linfeng Pan, Zaiwei Wang, Jing Gao

Electrochemical reduction of carbon dioxide, if powered by renewable electricity, could serve as a sustainable technology for carbon recycling and energy storage. Among all the products, ethanol is an attractive liquid fuel. However, the maximum faradaic e ...

Wiley-VCH Verlag GmbH2019

Multiple-Station Measurements of a Return-Stroke Electric Field From Rocket-Triggered Lightning at Distances of 68-126 km

Antonio Sunjerga, Quanxin Li

Far-field measurements of lightning-produced electromagnetic fields are of high importance for lightning location systems. Data from recorded lightning strokes can be, for example, used to assess the risk of lightning-induced damage in some geographical ar ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2019

H∞ and μ-Synthesis for Nanosatellites Rendezvous and Docking

Volker Gass, Camille Sébastien Pirat

In this brief, the nanosatellite rendezvous and docking problem is tackled. It was never attempted for small spacecraft, as critical technologies, such as six-degree-of-freedom (DoF) micropropulsion systems, have only recently become available due to advan ...

2019

Guidance, Navigation and Control for Autonomous Rendezvous and Docking of Nano-Satellites

Camille Sébastien Pirat

Is it possible to dock CubeSats in Low Earth Orbit? Challenges are associated with the level of miniaturisation: the docking accuracy is driven by the docking mechanism dimensions. The achievable docking performance with the Guidance, Navigation and Contro ...

EPFL2018

Modeling of concurrent CO2 and water splitting by practical photoelectrochemical devices

Sophia Haussener, Ronald Ramiro Gutierrez Perez

Concurrent solar generation of hydrogen and CO through photoelectrochemical (PEC) water and CO2 electrolysis, and the subsequent use of the product gas mixture in conventional Fischer-Tropsch processes, has the potential to provide a flexible pathway for d ...

Electrochemical Soc Inc2016

Dynamical Crossover in Hot Dense Water: The Hydrogen Bond Role

Philippe Gillet, Livia Eleonora Bove Kado, Umbertoluca Ranieri

We investigate the terahertz dynamics of liquid H2O as a function of pressure along the 450 K isotherm, by coupled quasielastic neutron scattering and inelastic X-ray scattering experiments. The pressure dependence of the single molecule dynamics is anomal ...

Amer Chemical Soc2016

Mesoscopic Modeling and Experimental Investigations of the Last-Stage Solidification of Globular-Equiaxed Grains in Metallic Alloys : Application to the Al-Cu System

Christophe Mondoux

Hot tearing is a major defect of solidification processes and welding. It occurs in metallic alloys while they are in the semi-solid state and is caused by a lack of liquid feeding in the mushy zone to compensate solid network openings due to tensile and s ...

EPFL2015

Storage of Renewable Energy by Reduction of CO2 with Hydrogen

Andreas Züttel, Philippe Mauron, Elsa Callini, Shunsuke Kato, Marco Roman Holzer

The main difference between the past energy economy during the industrialization period which was mainly based on mining of fossil fuels, e.g. coal, oil and methane and the future energy economy based on renewable energy is the requirement for storage of t ...

Schweizerische Chemische Gesellschaft2015

Applications of Model Reduction Techniques in Aerospace Combustors

Jan Sickmann Hesthaven

In this paper we consider some practical applications of model reduction methods in unstable gas turbine and rocket combustion. We explore a set of promising methods for reducing computational burden in large scale LES calculations of unsteady turbulent co ...

2014

Foil-Level Inkjet-Printed pyroMEMS Balloon Actuators: Fabrication, Modeling, and Validation

Nico de Rooij, Danick Briand, Francisco Molina Lopez, David de Koninck

A cleanroom-free fabrication process adapted to microfluidic devices is presented for pyrotechnical microelectromechanical systems balloon actuators. The actuators are intended for on-chip pumping and fluid ejection to replace tabletop pumping solutions in ...

Institute of Electrical and Electronics Engineers2014

Prediction of Hot Tear Formation in Vertical DC Casting of Aluminum Billets Using a Granular Approach

Michel Rappaz, Jean-Marie Drezet, Meisam Sistaninia

A coupled hydromechanical granular model aimed at predicting hot tear formation and stress-strain behavior in metallic alloys during solidification is applied to the semicontinuous direct chill casting of aluminum alloy round billets. This granular model c ...

Springer2013