Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Yarn

Related publications (18)

Electrodeposition of polyaniline on reduced graphene oxide/cotton yarn with tunable electrochemical performance for flexible textile supercapacitors

Dou Du

Graphene/cotton fibers show significant promise in wearable energy storage due to their low cost, porous structure, and exceptional integration ability into wearable systems. However, the eco-unfriendly reductants and standalone electric double-layer capac ...

Elsevier Sci Ltd2024

Spun fibres: a quasi circularly birefringent medium

Luc Thévenaz, Ana Gabriela Correa Mena, Xu Cheng

A simplified model describing the polarisation characteristics of spun fibres is proposed, aiming at determining how close to a circularly birefringent medium such a fibre is. This is of crucial importance regarding the interest of such a medium for magnet ...

SPIE2023

Cotton yarns decorated with hydrothermally reduced graphene oxide for flexible supercapacitors

Dou Du

Cotton fibers, a natural cellulose, have played a critical role in the development of wearable energy storage, owning to their wearability, integrability, eco-benignity, and cost effectiveness. Graphene, a two-dimensional carbon material, possesses excelle ...

Elsevier2023

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal, Helena Luisa Teixido Pedarros

Capillarity plays a crucial role in many natural and engineered systems, ranging from nutrient delivery in plants to functional textiles for wear comfort or thermal heat pipes for heat dissipation. Unlike nano- or microfluidic systems with well-defined por ...

FRONTIERS MEDIA SA2022

Electronic Multi-material Fibers and Textiles: Novel Designs and Applications

Chaoqun Dong

Flexible electronics and particularly soft fibers and textiles are becoming key components in rapidly developing fields such as robotics, health and personal care, sensing, or implantable and wearable devices. Thus far however, the ability to impart soft a ...

EPFL2021

Silk granular hydrogels self-reinforced with regenerated silk fibroin fibers

Dominique Pioletti, Pierre-Etienne Bourban, Peyman Karami, Adrien Julien Demongeot, Céline Samira Wyss

Granular hydrogels with high stability, strength, and toughness are laborious to develop. Post-curing is often employed to bind microgels chemically and enhance mechanical properties. Here a unique strategy was investigated to maintain microgels together w ...

2021

Monitoring of Torque Induced Strain in Composite Shafts with Embedded and Surface-Mounted Optical Fiber Bragg Gratings

John Botsis, Georgios Violakis, Georgios Pappas

In this study, silica glass, optical fiber Bragg gratings (FBGs) are used for torque-induced strain monitoring in carbon fiber reinforced polymer (CFRP) hollow shafts toward the development of a methodology for structural load monitoring. Optical fibers wi ...

2021

Experimental research on Textile Reinforced Concrete for the development of design tools

Aurelio Muttoni, Miguel Fernández Ruiz, Patrick Lorenzo Valeri

Due to the limited construction experiences as well as to the absence of clear and consolidated design provisions for design of Textile Reinforced Concrete (TRC), the application of this material in practice is still very limited. In this paper, the result ...

2018

Fracture of thin-ply composites : effects of ply thickness

Guillaume Frossard

The demand for carbon/epoxy laminated composites is continuously increasing due to their high specific modulus and strength. Among them, laminates made of particularly thin layers (from t=0.015 to 0.150 mm) and called thin-ply composites are gaining in int ...

EPFL2017

Mode I interlaminar fracture of carbon epoxy laminates: Effects of ply thickness

John Botsis, Joël Cugnoni, Thomas Gmür, Guillaume Frossard

In this work, the influence of ply thickness on strain energy release rate (ERR) in delamination of carbon epoxy laminates is addressed. Specimens with three ply thicknesses: 0.030, 0.075 and 0.150 mm are tested. While the ERR at onset of crack propagation ...

Elsevier2016

Spider silk: a novel optical fibre for biochemical sensing

Luc Thévenaz, Kenny Hey Tow, Isabelle Dicaire, Desmond Chow Ming Chia

Whilst being thoroughly used in the textile industry and biomedical sector, silk has not yet been exploited for fibre optics-based sensing although silk fibres directly obtained from spiders can guide light and have shown early promises to being sensitive ...

SPIE2015

Dynamic mechanical properties of epoxy/flax fibre composites

Jan-Anders Edvin Maansson, Pierre-Etienne Bourban, Fabien Duc

The mechanical and damping properties were measured for unidirectional, 0/90 and twill 2/2 flax fibre (FF) composites containing 40 vol% of fibres in an epoxy matrix. All composites were processed by resin transfer moulding. The influence of the impregnati ...

Sage Publications Ltd2014

Effect of annealing and silylation on the strength of melt-spun Ni-Mn-Ga fibres and their adhesion to epoxy

Véronique Michaud, Yves Leterrier, Susanne Glock, Edgars Sparnins

Single crystals of ferromagnetic Ni-Mn-Ga shape memory alloys show magnetic-field and stress induced twinning, leading to shape memory. Adaptive composites can thus be produced by embedding single crystalline particles or bamboo-structured Ni-Mn-Ga fibres ...

2014

Structural, physical and damping properties of melt-spun Ni-Mn-Ga wire-epoxy composites

Véronique Michaud, Susanne Glock

Ni-Mn-Ga is a ferromagnetic shape memory alloy that exhibits large, magnetic-field- and stress-induced strains via energy dissipating twinning when processed into single crystals. Grain boundaries suppress twinning and render polycrystalline Ni-Mn-Ga britt ...

2014

Arrested fluid-fluid phase separation in depletion systems: Implications of the characteristic length on gel formation and rheology

Suliana Manley

We investigate the structural, dynamical, and rheological properties of colloid-polymer mixtures in a volume fraction range of φ=0.15-0.35. Our systems are density-matched, residual charges are screened, and the polymer-colloid size ratio is ∼0.37. For the ...

American Institute of Physics2010

Fiber reinforced polypropylene nanocomposites

Chrystèle Houphouet-Boigny Favre

The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...

EPFL2007

3D morphology of cell cultures: a quantitative approach using micrometer synchrotron light tomography

Jeffrey Alan Hubbell, Randoald Müller

Current issues in both tissue engineering and cell biology deal with cell behavior extensively in 3D. Here, we explore synchrotron radiation micro-computed tomography as a tool for morphological characterization of such 3D cellular constructs, providing mi ...

2005

Identification par recalage modal et fréquentiel des propriétés constitutives de coques en matériaux composites

Joël Cugnoni

Fibre-reinforced composites are being increasingly used as alternatives for conventional materials primarily because of their high strength, specific stiffness, light weight and adjustable properties. However, before using this type of material with confid ...

EPFL2005