Concept

Generalized coordinates

In analytical mechanics, generalized coordinates are a set of parameters used to represent the state of a system in a configuration space. These parameters must uniquely define the configuration of the system relative to a reference state. The generalized velocities are the time derivatives of the generalized coordinates of the system. The adjective "generalized" distinguishes these parameters from the traditional use of the term "coordinate" to refer to Cartesian coordinates. An example of a generalized coordinate would be to describe the position of a pendulum using the angle of the pendulum relative to vertical, rather than by the x and y position of the pendulum. Although there may be many possible choices for generalized coordinates for a physical system, they are generally selected to simplify calculations, such as the solution of the equations of motion for the system. If the coordinates are independent of one another, the number of independent generalized coordinates is defined by the number of degrees of freedom of the system. Generalized coordinates are paired with generalized momenta to provide canonical coordinates on phase space. Generalized coordinates are usually selected to provide the minimum number of independent coordinates that define the configuration of a system, which simplifies the formulation of Lagrange's equations of motion. However, it can also occur that a useful set of generalized coordinates may be dependent, which means that they are related by one or more constraint equations. For a system of N particles in 3D real coordinate space, the position vector of each particle can be written as a 3-tuple in Cartesian coordinates: Any of the position vectors can be denoted r_k where k = 1, 2, ..., N labels the particles. A holonomic constraint is a constraint equation of the form for particle k which connects all the 3 spatial coordinates of that particle together, so they are not independent. The constraint may change with time, so time t will appear explicitly in the constraint equations.

Official source

https://en.wikipedia.org/wiki/Generalized_coordinates

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related courses (32)

PHYS-427: Relativity and cosmology I

Introduce the students to general relativity and its classical tests. ...

PHYS-428: Relativity and cosmology II

This course is the basic introduction to modern cosmology. It introduces students to the main concepts and formalism of cosmology, the observational status of Hot Big Bang theory and discusses major physical processes in the early Universe. ...

PHYS-100: Advanced physics I (mechanics)

La Physique Générale I (avancée) couvre la mécanique du point et du solide indéformable. Apprendre la mécanique, c'est apprendre à mettre sous forme mathématique un phénomène physique, en modélisant la situation et appliquant les lois de la physique. ...

Related lectures (32)

Lagrange I: Conservation Laws and Kinetic Energy

Explores Lagrangian mechanics, conservation laws, and kinetic energy in generalized coordinates.

Molecular dynamics under constraints

Explores molecular dynamics simulations under holonomic constraints, focusing on numerical integration and algorithm formulation.

Lagrange II: Principle of D'Alembert

Explores the Principle of D'Alembert and perfect constraints in mechanical systems, demonstrating their application through examples like the simple pendulum.

Related concepts (9)

Lagrangian mechanics

In physics, Lagrangian mechanics is a formulation of classical mechanics founded on the stationary-action principle (also known as the principle of least action). It was introduced by the Italian-French mathematician and astronomer Joseph-Louis Lagrange in his 1788 work, Mécanique analytique. Lagrangian mechanics describes a mechanical system as a pair consisting of a configuration space and a smooth function within that space called a Lagrangian. For many systems, where and are the kinetic and potential energy of the system, respectively.

Classical mechanics

Classical mechanics is a physical theory describing the motion of macroscopic objects, from projectiles to parts of machinery and astronomical objects, such as spacecraft, planets, stars, and galaxies. For objects governed by classical mechanics, if the present state is known, it is possible to predict how it will move in the future (determinism), and how it has moved in the past (reversibility). The "classical" in "classical mechanics" does not refer classical antiquity, as it might in, say, classical architecture.

Canonical coordinates

In mathematics and classical mechanics, canonical coordinates are sets of coordinates on phase space which can be used to describe a physical system at any given point in time. Canonical coordinates are used in the Hamiltonian formulation of classical mechanics. A closely related concept also appears in quantum mechanics; see the Stone–von Neumann theorem and canonical commutation relations for details.

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Official source

https://en.wikipedia.org/wiki/Generalized_coordinates

About this result

Related courses (32)

PHYS-427: Relativity and cosmology I

Introduce the students to general relativity and its classical tests. ...

PHYS-428: Relativity and cosmology II

PHYS-100: Advanced physics I (mechanics)

Related lectures (32)

Lagrange I: Conservation Laws and Kinetic Energy

Explores Lagrangian mechanics, conservation laws, and kinetic energy in generalized coordinates.

Molecular dynamics under constraints

Explores molecular dynamics simulations under holonomic constraints, focusing on numerical integration and algorithm formulation.

Lagrange II: Principle of D'Alembert

Explores the Principle of D'Alembert and perfect constraints in mechanical systems, demonstrating their application through examples like the simple pendulum.

Related publications (13)

Generalization of the total linearization method to three-dimensional free-surface flows

Andreas Mortensen, Simone Deparis

An iterative Finite Element method predicated on a linearization of the weak form around a reference configuration is derived for general, three-dimensional, free-surface flows, including systems with arbitrary contact angles. This sharp-interface method is a rigorous generalization of the Total Linearization Method that was proposed by Kruyt et al. (International Journal for Numerical Methods in Fluids 1988; 8: 351–363) for two-dimensional flows with contact angles limited to 90◦. In contrast to existing n

Elsevier2026

NIMOSEF: Neural Implicit Motion and Segmentation Functions

Jonas Richiardi

We present NIMOSEF, a novel unified framework that leverages neural implicit functions for joint segmentation, reconstruction, and displacement field estimation in cardiac magnetic resonance imaging (CMRI). By leveraging on a shared implicit representation for joint segmentation and motion estimation our approach improves spatio-temporal consistency with respect to conventional grid-based convolutional neural networks and implicit segmentation functions. NIMOSEF employs an auto-decoder architecture to learn

Springer Science and Business Media Deutschland GmbH2026

A Riemannian take on distance fields and geodesic flows in robotics

Sylvain Calinon

Distance functions are crucial in robotics for representing spatial relationships between a robot and its environment. They provide an implicit, continuous, and differentiable representation that integrates seamlessly with control, optimization, and learning. While standard distance fields rely on the Euclidean metric, many robotic tasks inherently involve non-Euclidean structures. To this end, we generalize Euclidean distance fields to more general metric spaces by solving the Riemannian eikonal equation,

SAGE Publications2026

Related people (16)

Mathieu Huruguen

Teaching & PhD Courses Algèbre linéaire et géométrie (pour MAN) PREPA-032(a) We present the fundamental notions of linear algebra in the geometric context where they emerged. We will therefore emphasize the dimensions 2 and 3, and insist on the visualisation of classical objects and operations in the plane and in the 3D space. Analysis II (for CMS) PREPA-005(a) This class focus on the studies of special functions : trigonometric, logarithmic and exponential functions. Anal

Wilfred Anthony Cooper

Kamiar Aminian

Kamiar Aminian received the M.S. degree in electrical engineering in 1982, the Ph.D degree in biomedical engineering in 1989 and the Postgraduate degree on technical computing in 1993 from Ecole Polytechnique Fédérale de Lausanne (EPFL). He was assistant professor (1994-1996) with Sharif University of Technology (Tehran). He joint EPFL in 1996 where he is currently Professor of medical instrumentation and the director of the Laboratory of Movement Analysis and Measurement in the Institute of Bioengineering of EPFL. His research interests include methodologies for human movement monitoring and analysis in real world conditions mainly based on wearable technologies and inertial sensors with emphasis on gait, physical activity and sport. His research aims to perform outcome evaluation in orthopaedics, to improve motor function and intervention programs in aging and patients with movement disorders and pain, and to identify metrics of performance in sport science. Kamiar Aminian is a member of the International Society of Posture and Gait Research, the Institute of Electrical and Electronics Engineers, the European Society of Movement Analysis in Adults and Children, the Prevention of fall Network Europe, the Intentional Society of Biomechanics and the President of the 3D analysis of the human movement group. He is author or co-author of more than 450 scientific papers published in reviewed journals and presented at international conferences and holds 10 patents related to medical devices. Full CV ORCID

Alexandre Terrier

Expertise BiomechanicsJoint biomechanicsMecano-biologyOrthopaedic researchPatient-specific modellingContinuum mechanicsFinite Element AnalysisExperimental testingStatistical analyses Expertise BiomechanicsJoint biomechanicsMecano-biologyOrthopaedic researchPatient-specific modellingContinuum mechanicsFinite Element AnalysisExperimental testingStatistical analyses Mission Develop patient-specific models of human joints and their replacement, in parallel with a database of patients, in order to test statistic

Deepak Somani

Expertise Computational Materials Science, Mechanical Engineering Education Masters in Thermal Science and Engineering | 2018 – 2023 Indian Institute of Technology Kharagpur Bachelors in Mechanical Engineering | 2018 – 2023 Indian Institute of Technology Kharagpur

Martin Vetterli

Martin Vetterli was appointed president of EPFL by the Federal Council following a selection process conducted by the ETH Board, which unanimously nominated him. Professor Vetterli was born on 4 October 1957 in Solothurn and received his elementary and secondary education in Neuchâtel Canton. He earned a Bachelor’s degree in electrical engineering from ETH Zurich (ETHZ) in 1981, a Master’s of Science degree from Stanford University in 1982, and a PhD from EPFL in 1986. Professor Vetterli taught at Columbia University as an assistant and then associate professor. He was subsequently named full professor in the Department of Electrical Engineering and Computer Sciences at the University of California at Berkeley before returning to EPFL as a full professor at the age of 38. He has also taught at ETHZ and Stanford University. Professor Vetterli has earned numerous national and international awards for his research in electrical engineering, computer science and applied mathematics, including the National Latsis Prize in 1996. He is a fellow of both the Association for Computing Machinery and the Institute of Electrical and Electronics Engineers and a member the US National Academy of Engineering. He has published over 170 articles and three reference works. Professor Vetterli’s work on the theory of wavelets, which are used in signal processing, is considered to be of major importance by his peers, and his areas of expertise, including image and video compression and self-organized communication systems, are central to the development of new information technologies. As the founding director of the National Centre of Competence in Research on Mobile Information and Communication Systems, Professor Vetterli is a staunch advocate of transdisciplinary research. Professor Vetterli knows EPFL inside and out. An EPFL graduate himself, he began been teaching at the school in 1995, was vice president for International Affairs and then Institutional Affairs from 2004 to 2011, and served as dean of the School of Computer and Communication Sciences in 2011 and 2012. In addition to his role as president of the National Research Council of the Swiss National Science Foundation, a position he held from 2013 to 2016, he heads the EPFL’s Audiovisual Communications Laboratory (LCAV) since 1995. Professor Vetterli has supported more than 60 students in Switzerland and the United States in their doctoral work and makes a point of following their highly successful careers, whether it is in the academic or business world. He is the author of some 50 patents, some of which were the basis for start-ups coming out of his lab, such as Dartfish and Illusonic, while others were sold (e.g. Qualcomm) as successful examples of technology transfer. He actively encourages young researchers to market the results of their work.

Ronan Boulic

I come from Brittany, France, where I have completed my PhD degree in Computer Science in 1986 from the University of Rennes, France, at the INRIA-IRISA research institute. I also received the Habilitation degree from the University of Grenoble, France, in march 1995. I was hired in 1989 as First Assistant in the VRLAB, I became scientific collaborator, and senior researcher. I'm presently Senior Scientist (MER) and leader of the Immersive Interaction research Group (IIG). I'm co-author of around 150 research papers among which 43 appeared in international peer-reviewed journals. I have contributed to multiple SNF projects and EU projects. Please check iig.epfl.ch for more details.

Damien Yves Valery Barbier

Denis Gillet

Denis Gillet received the Diploma in Electrical Engineering from the Swiss Federal Institute of Technology in Lausanne (EPFL) in 1988, and the Ph.D. degree in Information Systems also from the EPFL in 1995. During 1992 he was appointed as Research Fellow at the Information Systems Laboratory of Stanford University in the United States. He is currently Maître d'enseignement et de recherche at the EPFL School of Engineering, where he leads the React research group. His current research interests include Technologies Enhanced Learning (TEL), Human Computer Interaction (HCI), Human Devices Interaction (HDI) and Optimal Coordination of Complex and Distributed Systems. Denis Gillet is affiliated at EPFL with the Center for Intelligent Systems and the Center for Digital Education.

Philippe Müllhaupt

Expertise Nonlinear Control (Geometry and Algebra)Classical DynamicsRoboticsStatistics Mission Provide rigorous technical and scientific training in nonlinear control, classical mechanics, and statistical theory Current Work Research and teaching in the fields of control theory, statistics, dynamical systems, and general mechanics. Philippe Mullhaupt received his Diplôme d Education Ingï¿½nieur | Electricitï¿½ 1993 – 1993 EPFL DEA | Automatique et Traitement du Signal 199

Related concepts (9)

Lagrangian mechanics

Classical mechanics

Canonical coordinates

Related exercises (32)

Ball in rotating ring

We consider a ball of mass m sliding without friction in a ring of radius R. The ring itself is rotating around the vertical axis passing through its centre O with a constant angular speed ω with respect to the frame of reference of the laboratory. We suppose that the ball can be considered as a material point.

Determine the equation of motion of the ball.
Note: Use the spherical frame (O,e_(r),e_(θ),e_(ϕ)) (c.f. diagram of the vertical plane): whereu200au2001ωu2004=u2004ω(cosθu2006e_(r)−

Changing the vector frame and the coordinate system

Let v⃗ be a vector whose coordinates in the vector frame Oxyz are $\left( \begin{array}{c} v_1\\ v_2\\ v_3\\ \end{array}\right)$ . How would you srite this vector in the alternate vector frame Ox′y′z′ in which the z and z′ axes are identical and in which θ is the angle between x and x′ and between y and y′?
What are the radius vector $\overrightarrow{OP}$ ’s projections on the Cartesian axes in the figures below, as a function of the cylindrical (ρ, ϕ, z) or spherical (r, θ, ϕ

Coordinates : parametrisation

Write in Cartesian coordinates (x,y,z), cylindrical coordinates (ρ,ϕ,z) and spherical coordinates (r,θ,ϕ) :

The equation of a sphere of radius R centred at the origin.
The equation of a cylinder parallel to the z- axis, of radius R, of length L. The axis of the cylinder passes through the origin.
Sphere of radius R centred at the origin in coordinates:
- Cartesian: x²u2005+u2005y²u2005+u2005z²u2004=u2004R²
- Cylindrical: ρ²u2005+u2005z²u2004=u2004R²u200au2001 (where u200au200

Related notebooks (4)

Introduction to Reciprocal Lattices with Periodic Boundary Conditions.

Real vs. Reciprocal Space in 2D[1]¶ Introduction[2]¶ In this short notebook, we will introduce the lattice with periodic(Born- von Karman) boundary condition. Following the boundary condition, there is a transformation from real lattice to the reciprocal lattice. In the code below, we define a1 and a2 through cartesian vectors. Hence, the reciprocal vectors will be the original rotated by 90 degrees multiplied by 2pi and divided by the area of the unit cell (|a1xa2|) In [1]: i

Spherical Coordinates Visualization

Important note¶{.anchor-link} {#Important-note}

This notebook is obsolete and not maintained. For an interactive display of polar coordinates, please use

def rotation_matrix(d):
    """
    Calculates a rotation matrix given a vector d. The direction of d
    corresponds to the rotation axis. The length of d corresponds to 
    the sin of the angle of rotation.

    Variant of: http://mail.scipy.org/pipermail/numpy-discuss

Modeling Epidemics with Signal Processing Techniques

Epidemics and Signal Processing[1]¶

                                      [2]Paolo Prandoni, [3]LCAV, EPFL

In [1]: import matplotlib.pyplot as plt import numpy as np import scipy.signal as sp import seaborn as sns sns.set() In [2]: plt.rcParams["figure.figsize"] = (14,4) The basic reproduction number[4]¶ The propagation mechanism of an epidemic such as the one caused by SARS-CoV-2 virus can be roughly modeled, at least in its inital phase, as a process in which each infected individ

Exploring Quantization and Oversampling through One-Bit Music

One-Bit Music[1]¶ In this notebook we will talk about quantization and oversampling and we will do so by taking a trip down memory lane to revisit the early from monophonic square waves, introduce polyphony by way of pulse-width modulation and finish with the basics of sigma-delta quantization. pacman In [1]: import matplotlib import matplotlib.pyplot as plt import numpy as np import scipy.signal as sp from scipy.io import wavfile import IPython In [2]: import sys ! wget -q -O mus