Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Response surface methodology

Related publications (22)

Discretization Uncertainties of Flow and Fatigue Damage Simulations of a Reversible Francis Pump-Turbine at Off-Design Operation in Turbine Mode

Drazen Dujic, Daniel Biner, Philippe Alexandre Bontemps

In the framework of the XFLEX HYDRO H2020 European Project, a 5 MW reversible Francis pump-turbine prototype, equipped with an industrial full size frequency converter, is investigated to demonstrate enhanced grid regulation capacities of variable speed hy ...

SPRINGER INTERNATIONAL PUBLISHING AG2022

Data-based model maintenance in the era of industry 4.0: A methodology

Dimitrios Kyritsis, Foivos Psarommatis Giannakopoulos

Despite the high number of investments for data-based models in the expansion of Industry 4.0, too little effort has been made to ensure the maintenance of those models. In a data-streaming environment, data-based models are subject to concept drifts. A co ...

ELSEVIER SCI LTD2022

A generic methodology and a digital twin for zero defect manufacturing (ZDM) performance mapping towards design for ZDM

Foivos Psarommatis Giannakopoulos

Over recent years, the manufacturing industry has seen constant growth and change. From one side, it has been affected by the fourth industrial revolution (Industry 4.0). From the other side, it has had to enhance its ability to meet higher customer expect ...

2021

Investigation of effective processes parameters on lead (II) adsorption from wastewater by biochar in mild air oxidation pyrolysis process

Farzaneh Talebkeikhah, Mohsen Talebkeikhah

This study evaluates and compares several machine learning methods on the effects of different parameters in lead adsorption capacity. pH, contact time, adsorbent dosage and initial lead concentration were considered as inputs and adsorption capacity was r ...

TAYLOR & FRANCIS LTD2022

Optimization of a Py-GC/MS method for silicone -based lubricants analysis

Christophe Roussel

Condom evidence can be analysed using several analytical techniques, such as FTIR, MALDI-MS or DART-TOF-MS, but the only one that was used on real samples for transfer and persistence studies in the context of sexual assault or rape cases was Py-GC/MS. How ...

2020

Eco-friendly pesticide based on peppermint oil nanoemulsion: preparation, physicochemical properties, and its aphicidal activity against cotton aphid

Amirmostafa Amirjani

Using organic insecticides including plant oils, it is possible to design a new perspective for the control of insect pests. In this research, nanoemulsion formulations of Mentha piperita, wild-type essential oil (EO) were prepared utilizing high-energy ul ...

2020

Classic Electrically Small Antennas Versus in/On-Body Antennas: Similarities and Differences

Anja Skrivervik

Electrically small antennas (ESAs) have been discussed since the early radio days, when all antennas were small compared to the wavelength. The boom of mobile phones triggered a second wave of intense research activity on these devices, which continues tod ...

The European Associationa onAntennas and Propagation (EurAAP)2019

Design of Approximate Circuits by Fabrication of False Timing Paths: The Carry Cut-Back Adder

Christian Enz, Vincent Frédéric Camus, Jérémy Lucien Maurice Schlachter, Mattia Cacciotti

This paper introduces a novel method for designing approximate circuits by fabricating and exploiting false timing paths, i.e. critical paths that cannot be logically activated. This allows to strongly relax timing constraints while guaranteeing minimal an ...

2018

Modeling and treatment optimization of pharmaceutically active compounds by the photo-Fenton process: The case of the antidepressant Venlafaxine

César Pulgarin, Sami Rtimi, Stefanos Giannakis, Idriss Hendaoui

In this study, the anti-depressant Venlafaxine, a new emerging contaminant of interest for the Swiss legislation, was subjected to systematic degradation. In order to develop an efficient framework for the treatment of emerging contaminants at industrial s ...

Elsevier Sci Ltd2017

Analytical model for the out-of-plane response of vertically spanning unreinforced masonry walls

Katrin Beyer, Michele Godio

An analytical model describing the flexural response of vertically spanning out-of-plane loaded unreinforced masonry walls is presented in this paper. The model is based on the second-order Euler-Bernoulli beam theory and captures important characteristics ...

Wiley-Blackwell2017

Design and control of a low profile electromagnetic actuator for foldable pop-up mechanisms

Jamie Paik, Fabio Zuliani, Amir Firouzeh, Marco Salerno

Thin foldable origami mechanisms bring miniaturization and reconfiguration of complex structures allowing large volumetric change, low cost and versatility. Many applications require small robots with multiple capabilities including movement, sensing and c ...

Elsevier Science Sa2017

Design for Passivity in the Z-Domain for LCL Grid-Connected Converters

Drazen Dujic, Francisco Daniel Freijedo Fernández

This paper develops a design methodology aimed to shape passive the admittance of the LCL grid-connected voltage source converters (VSCs). A novel aspect of this work is the assessment of the range of frequencies for control design: due to discrete and PWM ...

2016

Second Harmonic and Sum-Frequency Generation from Aqueous Interfaces Is Modulated by Interference

Sylvie Roke, Cornelis Ulrich Lütgebaucks

The interfacial region of aqueous systems also known as the electrical double layer can be characterized on the molecular level with second harmonic and sum-frequency generation (SHG/SFG). SHG and SFG are surface specific methods for isotropic liquids. Her ...

American Chemical Society2016

Optimization of a Centrifugal Compressor Impeller for Robustness to Manufacturing Uncertainties

Compressor impellers for mass-market turbochargers are die-casted and machined with an aim to achieve high dimensional accuracy and acquire specific performance. However, manufacturing uncertainties result in dimensional deviations causing incompatible ope ...

Asme2016

A framework for characterizing RAP clustering in asphalt concrete mixtures

André-Gilles Dumont, Sara Bressi, Michel Pittet

Recycled Asphalt Pavement (RAP) is commonly used in asphalt for road rehabilitation or new constructions. Nevertheless, some physical and chemical phenomena that occur during production, laying and compaction of mixtures containing RAP are not yet complete ...

Elsevier Sci Ltd2016

Design methodology for low power RF LNA based on the figure of merit and the inversion coefficient

Christian Enz

The complexity of radiofrequency circuit design comes from the large number of parameters to be adjusted. Constant node shrink in CMOS process and variation of technology skills significantly contribute to this complexity. The paper reports on a reliable a ...

Springer2016

Analytical modeling of mixed-Mode bending behavior of asymmetric adhesively bonded pultruded GFRP joints

Anastasios Vassilopoulos, Moslem Shahverdi

This paper presents a semi-analytical methodology for the fracture mechanics assessment of asymmetric adhesively bonded composite joints. The method is based on the classical lamination theory, the simple beam theory and the extended global method. Experim ...

Elsevier2015

Automated optimization of photonic crystal slab cavities

Vincenzo Savona, Momchil Minkov

Thanks to their high quality factor, combined to the smallest modal volume, defect-cavities in photonic crystal slabs represent a promising, versatile tool for fundamental studies and applications in photonics. In paricular, the L3, H0, and H1 defects are ...

Nature Publishing Group2014

Design of experiment approach applied to reducing and oxidizing tolerance of anode supported solid oxide fuel cell. Part I: Microstructure optimization

Jan Van Herle, Aïcha Hessler-Wyser, Antonin Faes, Jean-Marie Fuerbringer

The main drawback of Ni/YSZ anode supports for solid oxide fuel cell application is their low tolerance to reducing and oxidizing (RedOx) atmosphere changes, owing to the Ni/NiO volume variation. This work describes a structured approach based on design of ...

Elsevier2011

Proposal and Validation of Medium-Frequency Power Transformer Design Methodology

Alfred Rufer

Power electronics is continuously evolving toward higher power densities. Consequently, volume, weight, and material reduction are becoming major design issues, which lead the research focus toward high/medium-frequency power conversion systems. This paper ...

2011