Giovanni De CesareExpertise
Numerical simulation and physical modeling of hydraulic works and schemes; reservoir sedimentation and turbidity currents; reservoir sediment management; Ultrasonic Doppler flow measurement; river training work and restoration; soil bioengineering and nature based solutions; fluvial eco-morphology; rapid transients in pressurized waterways; technology transfer, commissioned studies and expert reports in applied hydraulics, hydraulic constructions and infrastructures; organization of continuous edu
Paolo BenettinI was born in Padova, Italy, in 1986. After high school, I started the Environmental Engineering program at the University of Padova (Bachelor and Master), where I followed the 'soil protection' curriculum. During my Master studies I spent a semester as Erasmus student at Wageningen University (Wageningen, the Netherlands) to follow courses in Hydrology. After graduation, I decided to bring my education further and I started a Ph.D. at the civil and environmental engineering department at the University of Padova. My Ph.D. thesis focused on hydrologic transport and travel time distributions at the catchment scale. My contribution to the subject included both new theoretical formulations and extensive numerical applications to real catchments. During my Ph.D., I also spent 7 months as visiting research fellow at Virginia Tech University (Blacksburg, USA). Since I arrived at EPFL as post-doc in 2015, I started being involved in field and experimental activities, which allowed me to learn about practical experimental problems. In 2017 I had the opportunity to by hired by the ECHO laboratory as a permanent scientist, conducting research in the field of catchment hydrology.
Albert RenkenTeaching & PhD Past EPFL PhD Students Serge Maeder, Jacques Membrez, Stéphane Porchet, Philippe Menoud, Brigitta Frank, Harvey Randall, Wolfgang Zimmerer, Frédéric Van Vyve, Serge Golay, Jianzhong Yang, Stéphane Dubuis, Philippe Warnery, Anders Nattorp, Christian Spühler, Laurent Cavin, Miriam Lorenzi, Bastien Monnerat, André Rouge, Olivier Wolfrath, Peter Stahl, Ralf Maurer, Konrad Geissler, Volker Höller, Benoît Louis, Pierre Reuse, Fabio Rainone, Eric Joannet, Chrystèle Horny Past EPFL PhD Students as co
Florian Frédéric Vincent BreiderFlorian Breider obtained his PhD in the field of the stable isotope biogeochemistry from the University of Neuchatel in 2013. This was followed by seven months of postdoc at EPFL in the Atmospheric Particles Research Laboratory and two years as research associate at Tokyo Institute of Technology (Japan) where he conducted studies on nitrous oxide biogeochemistry in oceans. From 2015 to 2018, he was research scientist in the Laboratory for Water Quality and Treatment at EPFL where he conducted research on disinfection by-products and antibiotic resistant bacteria. Since May 2018, he is director of the Central Environmental Laboratory at the Institute of Environmental Engineering of EPFL.
Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
Barbora Bártová2015 scientist in Environmental microbiology laboratory EML and Interdisciplinary centre for electron microscopy CIME - EPFL
2012-2015 senior fellow in Material science, Engineering department CERN
2008-2011 postdoctoral researcher in Interdisciplinary centre for electron microscopy CIME EPFL
2006-2007 postdoctoral researcher within the Marie Curie Research Training Network Multimat, University of Antwerp
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Jan Sickmann HesthavenProf. Hesthaven received an M.Sc. in computational physics from the Technical University of Denmark (DTU) in August 1991. During the studies, the last 6 months of 1989 was spend at JET, the european fusion laboratory in Culham, UK. Following graduation, he was awarded a 3 year fellowship to begin work towards a Ph.D. at Riso National Laboratory in the Department of Optics and Fluid Dynamics. During the 3 years of study, the academic year of 1993-1994 was spend in the Division of Applied Mathematics at Brown University and three 3 months during the summer of 1994 in Department of Mathematics and Statistics at University of New Mexico. In August 1995, he recieved a Ph.D. in Numerical Analysis from the Institute of Mathematical Modelling (DTU). Following graduation in August 1995, he was awarded an NSF Postdoctoral Fellowship in Advanced Scientific Computing and was approinted Visiting Assistant Professor in the Division of Applied Mathematics at Brown University. In December of 1996, he was appointed consultant to the Institute of Computer Applications in Science and Engineering(ICASE) at NASA Langley Research Center (NASA LaRC). As of July 1999, he was appointed Assistant Professor of Applied Mathematics, in September 2000 he was awarded an Alfred P. Sloan Fellowship, as of July 2001 he was awarded a Manning Assistant Professorship, and in March 2002, he was awarded an NSF Career Award. In January 2003, he was promoted to Associate Professor of Applied Mathematics with tenure and in May 2004 he was awarded Philip J. Bray Award for Excellence in Teaching in the Sciences (the highest award given for teaching excellence in all sciences at Brown University). He was promoted to Professor of Applied Mathematics as of July 2005. From October 2006 to June 2013, he was the Founding Director of the Center for Computation and Visualization (CCV) at Brown University. As of October 2007, he holds the (honorary) title of Professor (Adjunct) at the Technical University of Denmark. In November 2009, he successfully defended his dr.techn thesis at the Technical University of Denmark and was rewarded the degree of Doctor Technices -- the highest academic distinction awarded based on ... substantial and lasting contributions that has helped to move the research area forward and penetrated into applications. As grant Co-PI he served from Aug 2010 to June 2013 as Deputy Director of the Institute of Computational and Experimental Research in Mathematics (ICERM), the newest NSF Mathematical Sciences Research Institute. After having spend his entire academic career at Brown University, Prof Hesthaven decided to pursue new challenges and joined the Mathematics Institute of Computational Science and Engineering (MATHICSE) at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland in July 2013. In March 2014 he was elected SIAM Fellow for contributions to high-order methods for partial differential equations.
Hannes Markus PeterCurrent work
I am a microbial ecologist and mainly interested in factors shaping bacterial communities and functioning in freshwater ecosystems. I use combinations of field observations, experiments and molecular techniques to test hypotheses regarding the assembly of microbial communities, the influence of environmental variability and relationships between diversity and funcioning. I enjoy working in alpine environments, which are sensitive to climate change and represent excellent model systems.
Teaching
