Publications related to Mechanical–electrical analogies

Related publications (27)

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution

Tobias Kippenberg, Nils Johan Engelsen, Alberto Beccari

Mechanical resonators are widely used in sensors, transducers and optomechanical systems, where mechanical dissipation sets the ultimate limit to performance. Over the past 15 years, the quality factors in strained mechanical resonators have increased by f ...

Nature Portfolio2024

Smart acoustic lining for UHBR technologies engine: from the design of an electroacoustic metasurface to experimental characterization under flow

Hervé Lissek, Maxime Volery

The SALUTE project aims at evaluating performance of electroacoustic metasurface, employing a surface array of controlled electroacoustic actuators, for smart acoustic lining under grazing turbulent flow to be used in UHBR Technologies Engines. Theoretical ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2023

Modeling and analysis of miniaturized magnetorheological valve for fluidic actuation

Sofia Lydia Ntella

Fluidic actuation enables movement in a wide range of mechanical systems, from simple laboratory devices to more complex industrial machinery. Fluids are used to generate motion of mechanical pieces. The term "fluids" encompasses two types of technologies: ...

EPFL2023

Damping of flexure blades based on bi-material additive manufacturing

Simon Nessim Henein, Florent Cosandier, Loïc Benoît Tissot-Daguette, Nikola Kalentics, Florent Alexandre Boudoire, Elias Sebastian Klauser

Flexure-based mechanisms have become state-of-the-art solutions for the design of high-precision mechanisms, free from friction wear, backlash, and lubrication. These properties which are necessary for applications in ultraclean or harsh environments, neve ...

2023

Deep learning accelerated prediction of the permeability of fibrous microstructures

Véronique Michaud, Baris Çaglar, Guillaume Clément Broggi

Permeability of fibrous microstructures is a key material property for predicting the mold fill times and resin flow path during composite manufacturing. In this work, we report an efficient approach to predict the permeability of 3D microstructures from d ...

2022

The DEMO magnet system - Status and future challenges

Pierluigi Bruzzone, Rainer Wesche, Kamil Sedlák, Davide Uglietti, Roberto Guarino, Mithlesh Kumar, Vincenzo D'Auria, Ortensia Dicuonzo, Chiara Frittitta, Federica Demattè

We present the pre-concept design of the European DEMO Magnet System, which has successfully passed the DEMO plant-level gate review in 2020. The main design input parameters originate from the so-called DEMO 2018 baseline, which was produced using the PRO ...

2022

In flow acoustic characterisation of a 2D active liner with local and non local strategies

Hervé Lissek, Maxime Volery

The design and the grazing flow aeroacoustical characterization of a 2D active liner based on an array of electroacoustic absorbers are presented in this paper. The strategy stands on a pressure-based, current-driven digital architecture for impedance cont ...

2022

Model order reduction based on functional rational approximants for parametric PDEs with meromorphic structure

Davide Pradovera

Many engineering fields rely on frequency-domain dynamical systems for the mathematical modeling of physical (electrical/mechanical/etc.) structures. With the growing need for more accurate and reliable results, the computational burden incurred by frequen ...

EPFL2021

Learning From Demonstration and Interactive Control of Variable-Impedance to Cut Soft Tissues

Aude Billard, Rui Wu

In this article, we propose an approach to extract variable-impedance during cutting tasks from human demonstrations, so as to ease soft-tissue cutting by robots. We model the dynamic adjustment of the human arm during interactions with the tissue and tran ...

2021

Integrated turnkey soliton microcombs

Tobias Kippenberg, Junqiu Liu, Rui Ning Wang, Jijun He, Tianyi Liu

Optical frequency combs have a wide range of applications in science and technology(1). An important development for miniature and integrated comb systems is the formation of dissipative Kerr solitons in coherently pumped high-quality-factor optical micror ...

NATURE RESEARCH2020

Durability of adhesively bonded joints between pultruded GFRP adherends under hygrothermal and natural ageing

Thomas Keller

This paper presents an experimental and numerical study about the durability of adhesively bonded joints between pultruded glass fibre reinforced polymer (GFRP) adherends for civil engineering applications. Single lap joint (SLJ) specimens were manufacture ...

ELSEVIER SCI LTD2019

Approximate Kron Reduction Methods for Electrical Networks With Applications to Plug-and-Play Control of AC Islanded Microgrids

Giancarlo Ferrari Trecate, Alessandro Floriduz, Michele Tucci

Kron reduction (KR) is a methodology for analyzing an electrical network by replacing it with a simpler circuit having less nodes but the same terminal behavior of voltages and currents at target vertices. Existing approaches to instantaneous KR, however, ...

2019

Cylindrical Dielectric Elastomer Actuator for Cardiac Assist Device

Jonathan André Jean-Marie Chavanne

This work has been triggered because of the need for a new way to relieve the heart. Current solutions are based on invasive systems. The main problem of such assistance is infectious risks. State of the art to define an alternative has allowed highlightin ...

EPFL2019

Multimode microwave circuit optomechanics as a platform to study coupled quantum harmonic oscillators

Nathan Rafaël Bernier

Harmonic oscillators might be one of the most fundamental entities described by physics. Yet they stay relevant in recent research. The topological properties associated with exceptional points that can occur when two modes interact have generated much int ...

EPFL2019

Soft And Wearable Transducers: Opportunities And Challenges For Daily Use

Stéphanie Lacour

Soft bioelectronic interfaces are broadly defined as microfabricated devices, distributed over large-areas, and with mechanical properties suited to comply the soft and dynamic biological tissues. The hybrid integration and processing of materials ranging ...

IEEE2019

Design of High Permittivity Polysiloxane Elastomers for Dielectric Elastomer Transducers

Philip Horst Caspari

Dielectric elastomer transducers consist of a dielectric elastomer between two compliant electrodes. When the elastic capacitor is electrically charged, the dielectric elastomer elongates until a balance of elastic and electrostatic force is reached. Elect ...

EPFL2019

Taylor-Fourier PMU on a Real-Time Simulator: Design, Implementation and Characterization

Mario Paolone, Asja Derviskadic, Guglielmo Frigo, Yihui Zuo

The development of software models of Phasor Measurement Units (PMUs) within Real-Time Simulators (RTSs) represents a promising tool for the design and validation of monitoring and control applications in electrical power networks. In this sense, it is nec ...

IEEE2019

Modeling Surface Recombination with Enhanced Devices Network for Optoelectronics

Jean-Michel Sallese, Camillo Stefanucci, Pietro Buccella, Chiara Rossi

We present a lumped devices network approach to simulate surface recombination effects in optoelectronics devices. The network is composed of generalized lumped devices where the excess carrier concentrations and gradients are mapped on electrical quantiti ...

IEEE2018

Recent improvements of the Critical Shear Crack Theory for punching shear design and its simplification for code provisions

Aurelio Muttoni, Miguel Fernández Ruiz, João Tiago Ramos Bernardo de Santa Rita Simões

In 1960, Kinnunen and Nylander presented a mechanical approach for calculating the punching resistance of slab-column connections. That approach accounted for the response of a slab sector and considered failure to occur on the basis of the strains develop ...

2018

Doppler-Based Acoustic Gyrator

Romain Christophe Rémy Fleury, Farzad Zangeneh Nejad

Non-reciprocal phase shifters have been attracting a great deal of attention due to their important applications in filtering, isolation, modulation, and mode locking. Here, we demonstrate a non-reciprocal acoustic phase shifter using a simple acoustic wav ...

2018