Concept

Boundary value problem

In the study of differential equations, a boundary-value problem is a differential equation subjected to constraints called boundary conditions. A solution to a boundary value problem is a solution to the differential equation which also satisfies the boundary conditions. Boundary value problems arise in several branches of physics as any physical differential equation will have them. Problems involving the wave equation, such as the determination of normal modes, are often stated as boundary value problems. A large class of important boundary value problems are the Sturm–Liouville problems. The analysis of these problems involves the eigenfunctions of a differential operator. To be useful in applications, a boundary value problem should be well posed. This means that given the input to the problem there exists a unique solution, which depends continuously on the input. Much theoretical work in the field of partial differential equations is devoted to proving that boundary value problems arising from scientific and engineering applications are in fact well-posed. Among the earliest boundary value problems to be studied is the Dirichlet problem, of finding the harmonic functions (solutions to Laplace's equation); the solution was given by the Dirichlet's principle. Boundary value problems are similar to initial value problems. A boundary value problem has conditions specified at the extremes ("boundaries") of the independent variable in the equation whereas an initial value problem has all of the conditions specified at the same value of the independent variable (and that value is at the lower boundary of the domain, thus the term "initial" value). A boundary value is a data value that corresponds to a minimum or maximum input, internal, or output value specified for a system or component. For example, if the independent variable is time over the domain [0,1], a boundary value problem would specify values for at both and , whereas an initial value problem would specify a value of and at time .

Official source

https://en.wikipedia.org/wiki/Boundary_value_problem

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related courses (32)

ME-251: Thermodynamics and energetics I

The course introduces the basic concepts of thermodynamics and heat transfer, and thermodynamic properties of matter and their calculation. The students will master the concepts of heat, mass, and momentum conservation, and apply these concepts to thermody ...

ChE-403: Heterogeneous reaction engineering

The theoretical background and practical aspects of heterogeneous reactions including the basic knowledge of heterogeneous catalysis are introduced. The fundamentals are given to allow the design of multiphase chemical reactors. ...

MATH-305: Introduction to partial differential equations

This is an introductory course on Elliptic Partial Differential Equations. The course will cover the theory of both classical and generalized (weak) solutions of elliptic PDEs. ...

Related MOOCs (1)

Sorption and transport in cementitious materials

In the MOOC: “Cement chemistry and sustainable cementitious materials”; you learned how to create more sustainable cementitious materials. But concrete is not an inert rock. It is a dynamic porous material, which can exchange water, gas and ions with its environment. Through physical and chemical interactions, these exchanges can have dramatic consequences: cracks due to shrinkage, reinforcement bars corrosion, spalling, … For a true sustainability, the durability of cementitious materials should not be f

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Official source

https://en.wikipedia.org/wiki/Boundary_value_problem

About this result

Related courses (32)

ME-251: Thermodynamics and energetics I

ChE-403: Heterogeneous reaction engineering

MATH-305: Introduction to partial differential equations

This is an introductory course on Elliptic Partial Differential Equations. The course will cover the theory of both classical and generalized (weak) solutions of elliptic PDEs. ...

Related lectures (32)

Finite Element Method: Weak Formulation and Applications

Explores integral and weak formulations in Finite Element Method applications.

Modeling Water Transfers with Richards Equation

Discusses modeling water transfers with the Richards equation, including soil hydraulic functions, numerical methods, boundary conditions, and irrigation impact.

Maxwell's Equations in Vacuum

Explores Maxwell's equations in vacuum, photon scanning near-field optical microscope, light confinement, and experimental proof of light effects.

Related publications (32)

Pointwise explicit bound for derivative of solutions to linear parabolic PDEs with Neumann boundary conditions

We derive explicit pointwise bounds for the spatial derivative |∂V∂x| of solutions to linear parabolic PDEs with Neumann boundary conditions. The bound is fully explicit in the sense that it depends only on the coefficients of the PDE and the domain, including closed-form expression for all constants. The proof is purely probabilistic. We first extend to time inhomogeneous diffusions a result concerning the derivative of the solution of a reflected SDE. Then, we combine it with the spectral expansion of the

2026

Damage assessment of thermal-humidity-mechanical coupling field of early-age concrete based on adaptive physics informed neural network

The crack-damage resistance of early-age concrete is affected by multiple factors such as hydration, self-drying, temperature and humidity diffusion, and material properties, which are difficult to be accurately evaluated by traditional theories and numerical models. This paper proposed an adaptive physics-informed back propagation neural network (BPINN) to accurately evaluate the damage of early-age concrete under multi-physics field coupling. The temperature and humidity diffusion and shrinkage models are

Elsevier BV2026

Adaptive FEM-DEM bridging coupling for third-body evolution in sheared granular media

The frictional behavior of dry solids in sliding contact is significantly affected by the formation and accumulation of wear particles at the interface. These particles create an amorphous layer known as the third body, which undergoes intense deformation. We show that accurately capturing the evolution of the third body requires a precise modeling of the physical dimensions of the surrounding elastic bodies and boundary conditions. This implies that a computational tribology simulation engine must resolve

Centre pour la Communication Scientifique Directe (CCSD)2026

Related people (32)

Annalisa Buffa

Teaching & PhD PhD Students Gonzalo Bonilla Moreno, Philipp Christoph Weder, Yannis Dirk Voet, Fabio Marcinno, Ferhat Sindy, Francesco Sala, Markus Renoldner, Mohamed Ben Abdelouahab, Davor Dobrota Past EPFL PhD Students Luca Coradello, Ondine Chanon, Riccardo Puppi Courses Numerical approximation of PDEs MATH-451 The course is about the derivation, theoretical analysis and implementation of the finite element method for the numerical approximation of partial differential equations in on

Katrin Beyer

Since 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory 2010-2017 Assistant Professor, EPFL. 2008-2010 Post-doctoral researcher, ETH Zürich. 2003-2007 Ph.D., Roseschool / Università di Pavia, Italy. 2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London. 2001 Diploma, Civil engineering, ETH Zürich.

Jean-Marie Drezet

1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project)

Jean-François Molinari

Professor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology.

Michaël Unser

Expertise Image Processing, Medical Imaging, Biological Imaging, Wavelets, Splines, Multiresolution Michael Unser is Full Professor with EPFL’s school of Engineering and the academic director of EPFL's Center for Imaging, Lausanne, Switzerland. His primary areas of investigation are signal processing, biomedical imaging and applied functional analysis. He is internationally recognized for his research contributions to sampling theory, wavelets, the use of splines for image processing, stochastic processes,

Andrea Rinaldo

Robert Dalang

Robert Dalang, né en 1961, a reçu le diplôme de Mathématicien-EPFL en 1983 et est lauréat du Prix Dommer. Il passe l'année 1985-86 à Cornell University (USA) comme chercheur invité. Il obtient le doctorat au Département de mathématiques de l'EPFL en 1987. Son domaine de spécialisation est la théorie des processeurs stochastiques. En 1987, Robert Dalang est nommé professeur assistant au Département de statistiques de l'Université de Californie à Berkeley (USA). En 1988, il reçoit une bourse post-doctorale du Fonds national scientifique américain et effectue des recherches sur les propriétés markoviennes de processus stochastiques à plusieurs paramètres. En 1990, il est nommé à Tufts University (Boston, USA). Il est promu professeur associé en mai 1993. Une partie importante de ses recherches se font dans le cadre de contrats avec le Fonds national scientifique américain et l'Office de la recherche de l'armée américaine. En collaboration avec le Prof. R. Cairoli du Département de mathématiques de l'EPFL, il a écrit un livre sur l'optimisation stochastique séquentielle publié en 1996 aux éditions John Wiley. M. Dalang est nommé professeur extraordinaire de probabilités au Département de mathématiques en 1995. Il y poursuit des travaux de recherche en processus stochastiques et probabilité appliquée et participe à l'enseignement des processus stochastiques, de la théorie des probabilités et des cours de mathématiques aux sections d'ingénieurs. Il dirige régulièrement des thèses de doctorats, est éditeur de plusieurs journaux de recherche mathématique et travail en collaboration avec des chercheurs de plusieurs universités européennes et américaines.

Andreas Pautz

Teaching & PhD PhD Students Sofia Portolan, Michel Saliba, Bishal Torrente, Alexis Paul Boris Claude Dupont-Bembinoff, Cynthia Camila Güttlein Past EPFL PhD Students Ting Zhu, Vladimir Vladimirov Brankov, Boris Aviv Hombourger, Damar Canggih Wicaksono, Petra Mala, Adolfo Rais, Valentyn Bykov, Daniel Jerôme Siefman, Evgeny Nikitin, Dionysios Chionis, Oskari Ville Pakari, Friederike Bostelmann, Jiani Gao, Efstathios Vlassopoulos, Alessandro Scolaro, Stefan Radman, Alexander Aures, Lubomír Bures, Ahmed Salah

Hervé Lissek

Expertise Acoustics and audio engineering, Electroacoustics.Room acoustics.Active noise control.Acoustic metamaterials.Assisted reverberation.Psychoacoustics.Sound spatialization Expertise Acoustics and audio engineering, Electroacoustics.Room acoustics.Active noise control.Acoustic metamaterials.Assisted reverberation.Psychoacoustics.Sound spatialization Mission Head of the Acoustic Group at the Laboratory of Wave Engineering LWE. Research topics :Active Electroacoustic Resonators: turning conventional lou

Pablo Antolin Sanchez

Teaching & PhD PhD Students Philipp Christoph Weder, Davor Dobrota Past EPFL PhD Students as codirector Ondine Chanon Courses Analysis III MATH-202(c) The course studies the fundamental concepts of vector analysis and Fourier-Laplace analysis with a view to their use in solving multidisciplinary problems in scientific engineering. Analysis III (for IC) MATH-203(d) The course studies the fundamental concepts of vector analysis and Fourier-Laplace analysis with a view to thei

Related units (26)

IIE - Administration

MATH - Divers

IIC - Administration

Related concepts (19)

Dirichlet boundary condition

In the mathematical study of differential equations, the Dirichlet (or first-type) boundary condition is a type of boundary condition, named after Peter Gustav Lejeune Dirichlet (1805–1859). When imposed on an ordinary or a partial differential equation, it specifies the values that a solution needs to take along the boundary of the domain. In finite element method (FEM) analysis, essential or Dirichlet boundary condition is defined by weighted-integral form of a differential equation.

Dirichlet problem

In mathematics, a Dirichlet problem is the problem of finding a function which solves a specified partial differential equation (PDE) in the interior of a given region that takes prescribed values on the boundary of the region. The Dirichlet problem can be solved for many PDEs, although originally it was posed for Laplace's equation.

Neumann boundary condition

In mathematics, the Neumann (or second-type) boundary condition is a type of boundary condition, named after Carl Neumann. When imposed on an ordinary or a partial differential equation, the condition specifies the values of the derivative applied at the boundary of the domain. It is possible to describe the problem using other boundary conditions: a Dirichlet boundary condition specifies the values of the solution itself (as opposed to its derivative) on the boundary, whereas the Cauchy boundary condition, mixed boundary condition and Robin boundary condition are all different types of combinations of the Neumann and Dirichlet boundary conditions.

Related MOOCs (1)

Sorption and transport in cementitious materials

Related exercises (9)

Initial conditions for a harmonic oscillator

The equation of motion for a harmonic oscillator reads, x(t)u2004=u2004Ccosu2006(ωt+ϕ)u2004=u2004Acosu2006(ωt)u2005+u2005Bsinu2006(ωt)xa0.

Establish the relations between the constants A, B and C.
Express the constants A, B and C in terms of the initial conditions (x₀,v₀) at tu2004=u20040 and the pulsation ω. The equation of motion of a harmonic oscillator is given by x(t)u2004=u2004Ccosu2006(ωt+ϕ)u2004=u2004Acosu2006(ωt)u2005+u2005Bsinu2006(ωt)xa0.
Using the trigonometric formula cos

Snowballs

A student of the general physics course takes part in a snowball fight with a friend. This friend manages to catch the balls and to send them back immediately. The student knows that for a snowball to reach a specific impact point with a given initial speed, it can follow two different trajectories corresponding to different throwing angles and different time of flights. Thus, in order to win the game, the student decides to throw two snowballs, at different times and with different throwing angles. The ba

The crow and the fox

A few days after the events narrated in the famous fable[1], the crow and the fox meet again. Having learned from its mistakes, the crow is determined not to be fooled again by the fox’s flattery. The fox, however, is set on getting a second piece of cheese. This time , it chooses a more direct method and throws a stone at the crow to scare it. It works beyond expectations: as soon as the stone is thrown, the crow drops the cheese. The crow is perched on a tree of height H; the fox is a distance L from the

Related notebooks (1)

Introduction to Reciprocal Lattices with Periodic Boundary Conditions.

Real vs. Reciprocal Space in 2D[1]¶ Introduction[2]¶ In this short notebook, we will introduce the lattice with periodic(Born- von Karman) boundary condition. Following the boundary condition, there is a transformation from real lattice to the reciprocal lattice. In the code below, we define a1 and a2 through cartesian vectors. Hence, the reciprocal vectors will be the original rotated by 90 degrees multiplied by 2pi and divided by the area of the unit cell (|a1xa2|) In [1]: i