Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Nonwoven fabric

Related publications (22)

On the Fabric of a 3D Printed Soil

Alessio Ferrari

3D printing of earthen materials is on the rise in the field of Additive Manufacturing (AM) due to the opportunity this technique offers to realize structures and manufacts with low environmental impacts, but very little is known about the hydromechanical ...

2023

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023

Recyclable flame retardant phosphonated epoxy based thermosets enabled via a reactive approach

Véronique Michaud, Valentin Rougier

The development of reusable fire-safe polymers with a prolonged lifetime heralds the switch for a transition towards circular economy. In this framework, we report a novel phosphonated thermoset which is composed of networked phosphonate esters containing ...

ELSEVIER SCIENCE SA2023

Experimental characterisation of textile compaction response: A benchmark exercise

Véronique Michaud, Baris Çaglar

This paper reports the results of an international benchmark exercise on the measurement of fibre bed compaction behaviour. The aim was to identify aspects of the test method critical to obtain reliable results and to arrive at a recommended test procedure ...

2021

Kinematic and mechanical response of dry woven fabrics in through-thickness compression: Virtual fiber modeling with mesh overlay technique and experimental validation

Véronique Michaud, Baris Çaglar

The through-thickness compressive behavior of fabric reinforcements is crucial in liquid composite molding manufacturing processes. Predictive simulations of the compressive response are thus necessary to enable a virtual processing workflow. These are com ...

2021

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

Véronique Michaud, Baris Çaglar, Amaël Maximilien Cohades, Damiano Salvatori

The out-of-plane permeability of two glass fibre fabrics was measured by 26 institutions using silicone oil as a test fluid. Participants in this study were free to select the test procedure, specimen dimensions and data analysis method, provided that test ...

2021

3D Weaving with Curved Ribbons

Mark Pauly, Florin Isvoranu, Francis Julian Panetta, Yingying Ren, Tian Chen, Samuel Jean Bernard Poincloux, Christopher Brandt

Basket weaving is a traditional craft for creating curved surfaces as an interwoven array of thin, flexible, and initially straight ribbons. The three-dimensional shape of a woven structure emerges through a complex interplay of the elastic bending behavio ...

2021

Electronic Multi-material Fibers and Textiles: Novel Designs and Applications

Chaoqun Dong

Flexible electronics and particularly soft fibers and textiles are becoming key components in rapidly developing fields such as robotics, health and personal care, sensing, or implantable and wearable devices. Thus far however, the ability to impart soft a ...

EPFL2021

Textile reinforced concrete for sustainable structures: Future perspectives and application to a prototype pavilion

Aurelio Muttoni, Miguel Fernández Ruiz, Patricia Guaita, Raffael Baur, Patrick Lorenzo Valeri

Textile reinforced concrete (TRC) is a cementitious‐based material where reinforcement consists of high‐strength noncorrosive textile fabrics. Due to the use of a noncorrosive reinforcement, cover requirements can be limited to minimum static values and th ...

2020

Tensile response of textile reinforced concrete

Aurelio Muttoni, Miguel Fernández Ruiz, Patrick Lorenzo Valeri

Textile Reinforced Concrete (TRC) is a cementitious composite material where a carbon or glass fabric is embedded as reinforcement. The use of TRC allows building thin and light structures, with reduced concrete covers and an enhanced durability due to the ...

2020

Assessment of capillary phenomena in liquid composite molding

Véronique Michaud, Baris Çaglar, Feyza Karasu Kiliç, Cem Tekin

The interplay between capillary and viscous forces plays a significant role for optimal part quality in fiber-reinforced composites manufactured by Liquid Composite Molding (LCM); these are however difficult to analyze during flow. Two approaches are propo ...

2019

3D spacers enhance flow kinetics in resin transfer molding with woven fabrics

Véronique Michaud, Baris Çaglar, Damiano Salvatori

Impregnation time in Resin Transfer Molding (RTM) is directly proportional to resin viscosity and inversely proportional to fabric permeability, limiting the use of high-viscosity resins with conventional reinforcements. In this study, we show how to reduc ...

2019

In-plane permeability distribution mapping of isotropic mats using flow front detection

Véronique Michaud, Baris Çaglar, Damiano Salvatori

In-plane permeability of textile fabrics is often characterized by one-dimensional rectilinear flow experiments, displaying limitations related to potential race-tracking effects and the need to run experiments at several fiber volume fractions. We propose ...

2018

Strategies for faster impregnation in melt thermoplastic resin transfer molding process

Damiano Salvatori

Continuous fiber thermoplastic composites are potential substitutes of steel in structural automotive components, since they combine fiber strength and rigidity with ductility, potential recyclability and low density of the thermoplastic (TP) matrix. Resin ...

EPFL2018

All‐Fabric Wearable Electroadhesive Clutch

Dario Floreano, Jun Shintake, Vivek Ramachandran

A lightweight, textile fabricated, haptic device consisting of an electrostatic adhesive clutch is introduced, which can constrain body movement when activated at low power (≈1 mW). The clutch electrodes are composite structures, prepared by coating copper ...

Wiley2018

Permeability of textile fabrics with spherical inclusions

Véronique Michaud, Baris Çaglar

We investigated the effect of rigid spherical inclusions such as microcapsules and fillers on the permeability of fabrics by using glass beads as model inclusions. Beads with a range of diameters (40-800 mu m) and volume fractions (2.5-10%) were sieved bet ...

Elsevier2017

TimeRank: A dynamic approach to rate scholars using citations

Giovanni Colavizza

Rating has become a common practice of modern science. No rating system can be considered as final, but instead several approaches can be taken, which magnify different aspects of the fabric of science. We introduce an approach for rating scholars which us ...

Elsevier Science Bv2017

Low-temperature Fabrication of Highly-Efficient, Optically-Transparent (FTO-free) Graphene Cathode for Co-Mediated Dye-Sensitized Solar Cells with Acetonitrile-free Electrolyte Solution

Michael Graetzel, Shaik Mohammed Zakeeruddin, Paul Liska, Ladislav Kavan

Propionitrile electrolyte solutions mixed with sulfolane or with 1-ethyl 3-methyl imidazolium tetracyanoborate (ionic liquid) are optimized for Co(bpy)(3)(3+)/Co(bpy)(3)(2+)-tmediated DSCs working at low illumination intensity. Highly-active cathode cataly ...

Elsevier2016

Water retention behaviour and microstructural evolution of MX-80 granular bentonite during wetting and drying cycles

Lyesse Laloui, Alessio Ferrari, Ali Seiphoori

MX-80 bentonite used in engineered barrier systems would be subjected to wetting and drying cycles. To assess the response of the material under such circumstances, a comprehensive experimental characterisation of the water retention behaviour of compacted ...

2014

Comparison of HIPIMS sputtered Ag- and Cu-surfaces leading to accelerated bacterial inactivation in the dark

César Pulgarin, Juan Kiwi, Sami Rtimi

Recently, compact uniform and adhesive films of Ag and Cu have been prepared by DC-magnetron sputtering (DC), pulsed DC magnetron sputtering (DCP) and high power impulse magnetron sputtering (HIPIMS). This study reports the HIPIMS deposition for Ag and Cu ...

Elsevier Science Sa2014