Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Phenol formaldehyde resin

Related publications (28)

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal

Frontal polymerisation has the potential to bring unprecedented reductions in energy demand and process time to produce fibre reinforced polymer composites. Production of epoxy-based fibre reinforced polymer parts with high fibre volume content, commonly e ...

2024

Formaldehyde regulates one-carbon metabolism and epigenetics

Yimon Aye

Recently, Pham et al. used an array of model systems to uncover a role for the enzyme methionine adenosyltransferase (MAT) -1A, which is mainly expressed in liver, in both sensing formaldehyde and regulating transcriptional responses that protect against i ...

Cell Press2024

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

Alper Balkan

In this work, various methods were used to improve the printability of a photocurable polyvinylsilazane resin filled with silicon nitride particles for digital light processing. The developed resin was used as a preceramic polymer for polymer-to-ceramic co ...

Taylor & Francis Ltd2024

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Controlling the Microstructure and Composition of 3D Printed Soft Load-Bearing Hydrogels

Matteo Hirsch

Hydrogels are among the first materials expressly designed for their use in biomedicine. However, state-of-the-art applications of hydrogels are severely limited because they are typically either too soft or too brittle such that they cannot bear significa ...

EPFL2023

Diformylxylose as a new polar aprotic solvent produced from renewable biomass

Jeremy Luterbacher, Anastasiia Komarova, Graham Reid Dick

Lignin is a promising candidate for the replacement of fossil-based materials, due to its natural abundance and aromatic structure. This same structure poses major challenges to lignin's exploitation for material development. The harsh conditions generally ...

2021

Grafting of Alkali Metals on Fumed Silica for the Catalytic Dehydrogenation of Methanol to Formaldehyde

Oliver Kröcher, Alimohammad Bahmanpour, Christophe Jean Baranowski

Water free, non-oxidative catalytic dehydrogenation of methanol to formaldehyde is an important process for the formation of anhydrous, molecular formaldehyde (FA). Sodium or sodium-containing salts were shown to catalyze the reaction, but their reaction m ...

Wiley-VCH Verlag2021

Construction of Functional Superhydrophobic Biochars as Hydrogen Transfer Catalysts for Dehydrogenation of N-Heterocycles

Zhaowen Dong

To endow metal-free materials with the high catalytic activity that is typically featured by a metal-based catalyst is yet a constant pursuit in the field of catalytic chemistry. In this work, novel functional biochars (DCNs) were prepared from wheat straw ...

AMER CHEMICAL SOC2021

Stabilization strategies in biomass depolymerization using chemical functionalization

Jeremy Luterbacher, Ydna Marie Questell-Santiago

A central feature of most lignocellulosic-biomass-valorization strategies is the depolymerization of all its three major constituents: cellulose and hemicellulose to simple sugars, and lignin to phenolic monomers. However, reactive intermediates, generally ...

2020

Mechanical and Morphological Properties of Lignin-Based Thermosets

Cédric Terrier

The need for renewable alternatives for fossil-based aromatic material constituents is evident for a more sustainable society. Lignin is the largest source of naturally occurring aromatic compounds but has mainly been considered as waste material or energy ...

2020

3D spacers enhance flow kinetics in resin transfer molding with woven fabrics

Véronique Michaud, Baris Çaglar, Damiano Salvatori

Impregnation time in Resin Transfer Molding (RTM) is directly proportional to resin viscosity and inversely proportional to fabric permeability, limiting the use of high-viscosity resins with conventional reinforcements. In this study, we show how to reduc ...

2019

Micromechanical study on the origin of fiber bridging under interlaminar and intralaminar mode I failure

John Botsis, Georgios Pappas, Fernando Naya Montans

Fiber reinforced polymers (FRPs) subjected to mode I fracture show important toughening due to the development of large scale bridging (LSB). Experimental studies of this phenomenon in unidirectional carbon/epoxy laminates using double cantilever beam spec ...

ELSEVIER SCI LTD2019

Production and characterization of stabilized lignin

Masoud Talebi Amiri

Lignocellulosic biomass is a sustainable source of renewable carbon, and it is the most abundant form of terrestrial biomass. The three main constituents of lignocellulosic biomass are cellulose, hemicellulose, and lignin. The monomers from these biopolyme ...

EPFL2019

Ozonation of Para-Substituted Phenolic Compounds Yields p-Benzoquinones, Other Cyclic α,β-Unsaturated Ketones, and Substituted Catechols

Urs von Gunten, Peter Rudolf Tentscher

Phenolic moieties are common functional groups in organic micropollutants and in dissolved organic matter, and are exposed to ozone during drinking water and wastewater ozonation. Although unsubstituted phenol is known to yield potentially genotoxic p-benz ...

2018

Single-step conversion of lignin monomers to phenol: Bridging the gap between lignin and high-value chemicals

Paul Joseph Dyson, Ning Yan

Transformation of lignin into high-value chemicals is hampered by the complexity of monomers obtained from lignin depolymerization. Here we report a strategy, composed of hydro-demethoxylation and de-alkylation reactions, that is able to chemically converg ...

2018

Electrospun nanofibrous interleaves for improved low velocity impact resistance of glass fibre reinforced composite laminates

Véronique Michaud, Amaël Maximilien Cohades

This study analyses the damage tolerance of nanofibre interleaved composites when subjected to low velocity impact. Cross-ply glass/epoxy composite laminates are produced. Drop-weight impact and residual compressive strength measurements are performed on t ...

2018

Selective synthesis of dimethyl ether on eco-friendly K10 montmorillonite clay

Jeremy Luterbacher, Oliver Kröcher, Florent Emmanuel Héroguel, Alimohammad Bahmanpour, Christophe Jean Baranowski

The methanol dehydration reaction was studied over environmentally benign, easily accessible and inexpensive K10 montmorillonite clay used as the catalyst at a temperature range between 200–700 °C. Nearly 100% selectivity towards dimethyl ether (DME) at 80 ...

2018

Strategies for faster impregnation in melt thermoplastic resin transfer molding process

Damiano Salvatori

Continuous fiber thermoplastic composites are potential substitutes of steel in structural automotive components, since they combine fiber strength and rigidity with ductility, potential recyclability and low density of the thermoplastic (TP) matrix. Resin ...

EPFL2018

Size limitations on achieving tough and healable fibre reinforced composites through the use of thermoplastic nanofibres

Véronique Michaud, Amaël Maximilien Cohades

Phase-separated blends of epoxy and poly(ε-caprolactone) (PCL) provide crack repair in composites after a thermal treatment at 150 °C, but decrease the material’s fracture toughness. This article investigates the combination of healing with interlaminar fr ...

2018

Formation of brominated trihalomethanes during chlorination or ozonation of natural organic matter extracts and model compounds in saline water

Urs von Gunten

Oxidation experiments (chlorine, ozone and bromine) were carried out with synthetic saline waters containing natural organic matter (NOM) extracts and model compounds to evaluate the potential of these surrogates to mimic the formation of brominated trihal ...

2018