Harald BruneOriginaire de Münich en Allemagne, né en 1961, Harald Brune obtient son diplôme en physique de l'Université Ludwig Maximilians en 1989. Après une thèse en chimie physique à l'Institut Fritz-Haber de la Société Max-Planck à Berlin il obtient son titre de docteur ès sciences en 1992. Dès cela, il rejoint le groupe du Prof. K. Kern à l'Institut de physique expérimentale à l'EPFL. En 1995 il est chercheur invité à Copenhague travaillant en modélisation chez le Prof. J. Nørskov. De retour à l'EPFL, il se voit décerné le prix Latsis EPFL 1996 pour ses études par microscopie à effet tunnel de processus atomiques déterminants la croissance cristalline de couches minces. En 1998 il obtient son habilitation (venia legendi) en Physique et est nommé Maître d'enseignement et de recherche (MER) en nanophysique à l'EPFL. La même année il recoit une offre de Professeur Ordinaire (C4) de l'Université Philipps de Marburg. Début 1999 il réfuse cette offre et accepte un poste de Professeur Extraordinaire à l'EPFL et s'installe au sein de l'Institut de la Physique des Nanostructures. Il est nommé Professeur Ordinaire en 2005. Sa recherche porte sur les propriétés physiques (en particulier le magnétisme et la structure électronique) de nouvelles formes de la matière condensée comme des nanostructures et des couches ultra-minces. Il s'intéresse également à la catalyse hétérogène sur des systèmes inspirés dans leur composition et taille par celle des sites actives dans les enzymes en biologie. Il enseigne la Physique Générale pour ingénieurs, la Physique des matériaux solides pour physiciens, les méthodes expérimentales pour physiciens, ainsi que la Physique des surfaces, interfaces et nanostrcutures à l'école doctorale.
Quy Ong KhacExpertise
Nanoparticle characterizationSurface and interface scienceAnalytical ultracentrifugationCryogenic electron tomographyScanning tunneling microscopy
Current Work
Cryogenic Transmission Electron Tomography (Cryo-ET): Developed Cryo-ET methods as quantitative thermodynamic tools. Studied interaction potentials and other thermodynamic properties of nanoparticles and proteins. Key publications: Ong Q. et al. Materials Horizons, 2022Ekaterina P., Ong, Q. et al. ACS Nano, 2026Analytical Ultracentrifugatio
Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Mission
Research at the Laboratory of Polymer (LP) focuses on the development of novel advanced polymeric materials with potential applications in optics, electronics or medicine. The philosophy is that precise control over nanoscale structure is an important prerequisite to tailor polymer properties. To this end, a “bottom-up” approach is followed, which starts with designing a new material at the molecular level, in order to be able to pr
Francesco MondadaDr. Mondada received his M.Sc. in micro-engineering in 1991 and his Doctoral degree in 1997 at EPFL. During his thesis he co-founded the company K-Team, being both CEO and president of the company for about 5 years. He is one of the three main developers of the Khepera robot, considered as a standard in bio-inspired robotics and used by more than 1,000 universities and research centers worldwide. Fully back in research in 2000 and after a short period at CALTECH, he participated to the SWARM-BOTS project as the main developer of the s-bot robot platform, which was ranked on position 39 in the list of The 50 Best Robots Ever (fiction or real) by the Wired Journal in 2006. The SWARM-BOTS project was selected as FET-IST success story by the EU commission. He is author of more than 100 papers in the field of bio-inspired robotics and system level robot design. He is co-editor of several international conference proceedings. In November 2005 he received the EPFL Latsis University prize for his contributions to bio-inspired robotics. In 2011 he received the "Crédit Suisse Award for Best Teaching" from EPFL and in 2012 the "polysphère" award from the students as best teacher in the school of engineering. His interests include the development of innovative mechatronic solutions for mobile and modular robots, the creation of know-how for future embedded applications, and making robot platforms more accessible for education, research, and industrial development.
Daryl Yee Wei LiangIncoming Assistant Professor of Electrical and Microengineering (March 2023)
Henning Paul-Julius StahlbergMission
We use high-resolution cryo-electron microscopy to study neurodegeneration and other protein systems. We also develop novel imaging technology in the areas of electron microscopy hardware and applications, sample preparation, data collection schemes, and data analysis software systems. The Stahlberg group is supported by the University of Lausanne, Faculty of Medicine and Biology, and by the EPFL, Faculty of Basic Sciences, Physics Institute. The LBEM is a research laboratory of both UNIL and EPFL.
Jiawen LiuJiawen obtained his bachelor's degree in 2015 from the Beijing Institute of Technology, China, majoring in electrical and electronic engineering. He then pursued a Master's degree in 2017 at the University of Lyon, France, where he discovered his passion for optics and photonics. Following that, he completed his PhD degree at Sorbonne University in 2020, Paris, focusing on the photo-physical properties of nanoscale single-photo emitters, as well as assembled nanostructures. Afterwards, Jiawen joined Carlo S
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Francesco StellacciFrancesco Stellacci graduated in Materials Engineering at the Politecnico di Milano in 1998 with a thesis on photochromic polymers with Prof. Giuseppe Zerbi and Mariacarla Gallazzi. In 1999 he moved to the Chemistry Department of the University of Arizona for as a post-doc in the group of Joe Perry in close collaboration with the group of Seth Marder. In 2002 he moved to the Department of Materials Science and Engineering at the Massachusetts Institute of Technology as an assistant professor. He was then promoted to associate without (2006) and with tenure (2009). In 2010 he moved to the Institute of Materials at EPFL as a full Professor. He holds the Alcan EP Chair. Francesco was one of the recipients of the Technology Review TR35 "35 Innovator under 35" award in 2005, and the Popular Science Magazine "Brilliant 10" award in 2007. He has been a Packard Fellow starting 2005.
Nicolas WeissExpertise
LabVIEW programming :- data acquisition.- experiment and system automation.- graphical user interface.- support and maintenance of older programs.- support for LabVIEW developpers.
Education Ing. physicien | 2000 – 2000 EPFL Dr. es science (physique) | 2004 – 2004 EPFL
Ayush AgarwalCurrent work
Developing size resolved elemental analysis methods for characterizing nano-objects in process effluents and environmental samples
Education PhD | Energy - Chemistry and Chemical Engineering 2020 – 2020 EPFL – École polytechnique fédérale de Lausanne / Paul Scherrer Institute M.Sc. | Chemical Engineering for Energy and Environment 2017 – 2019 KTH Royal Institute of Technology B.E. (Hons.) | Chemical Engineering 2011 – 2015 Birla I
Esther AmstadEsther Amstad studied material science at ETH in Zurich. She also carried out her PhD thesis at the same University under the supervision of Prof. Marcus Textor; for her thesis, she worked on the surface modification and steric stabilization of oxide nanoparticles. As a postdoctoral fellow, she joined the experimental condensed soft matter group of David A. Weitz at Harvard University where she used droplet based microfluidics to assemble different types of functional micro- and nanomaterials. In addition, she developped new microfluidic devices that enable the production of very small, airborne drops as well as devices that produce highly monodisperse emulsion drops at a very high throughput. In June 2014, Esther joined the material science department (IMX) of EPFL where she is leading the Soft Materials Laboratory (SMAL).
Cyrille HibertCyrille HIBERT received his diploma in Physics in 1994 and his PhD in 1998 from University of Orleans (FR). He then held a post doctoral position in GREMI laboratory at the University of Orleans in collaboration with Alcatel Vacuum Technology and ST Microelectronics, working in deep anisotropic etching of silicon with an Inductively Coupled Plasma reactor. In May 2000 he joined the EPFL-Center of Micro-Nano-technology where he was in charge of the plasma etching activities. He left EPFL in October 2003 for a sabbatical year to join the CFF group at NMRC (Ireland) now called Tyndall Institute. He worked on developing plasma processing. In October 2004, he came back to EPFL-CMI to be in charge of etching and nanotechnology activities (FIB and future ebeam litho).
Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Abdeljalil SayahTeaching & PhD Courses Advanced microfabrication practicals MICRO-373 This TP allows for in-depth training on advanced micro and nanofabrication methods in a clean-room environment for selected applications, gain deeper knowledge in MEMS/NEMS processes, work in a small group together with PhD students/postdocs during 14 weeks touching all aspects of a microprocess. Microfabrication practicals MICRO-332 The goal of this course is to introduce students to the practical aspects
Suliana ManleyFrom 2016 Associate professor, EPFL, Lausanne, Switzerland
2009-2016 Tenure-track assistant professor, EPFL, Lausanne, Switzerland
2006-2009 Post-Doctoral fellow, National Institutes of Health, Bethesda, MD, USA
2004-2006 Post-Doctoral fellow, Massachusetts Institute of Technology, Cambridge, MA, USA
1999-2004 PhD (Physics) Awarded 06/2004, Harvard University, Cambridge, MA, USA
1993-1997 Bachelors (Cum Laude) Physics & Mathematics, Rice University, Houston, TX, USA
Dario FloreanoProf. Dario Floreano is director of the Laboratory of Intelligent Systems at the Swiss Federal Institute of Technology Lausanne (EPFL). Since 2010, he is the founding director of the Swiss National Center of Competence in Robotics, a research program that brings together more than 20 labs across Switzerland. Prof. Floreano holds an M.A. in Vision, an M.S. in Neural Computation, and a PhD in Robotics. He has held research positions at Sony Computer Science Laboratory, at Caltech/JPL, and at Harvard University. His main research interests are Robotics and A.I. at the convergence of biology and engineering. Prof. Floreano made pioneering contributions to the fields of evolutionary robotics, aerial robotics, and soft robotics. He served in numerous advisory boards and committees, including the Future and Emerging Technologies division of the European Commission, the World Economic Forum Agenda Council, the International Society of Artificial Life, the International Neural Network Society, and in the editorial committee of several scientific journals. In addition, he helped spinning off two drone companies (senseFly.com and Flyability.com) and a non-for-profit portal on robotics and A.I. (RoboHub.org). Books
Manuale sulle Reti Neurali, il Mulino (in Italian), 1996 (first edition), 2006 (second edition)Evolutionary Robotics, MIT Press, 2000
Bio-Inspired Artificial Intelligence, MIT Press, 2008
Flying Insects and Robots, Springer Verlag, 2010
Benjamin DwirAcademic title: Dr.
Birth date: 24.10.1959
Nationality: Swiss
At EPFL since: 1988
Alok RudraTeaching & PhD Courses Introduction to Metalorganic Vapour Phase Epitaxy of III-V semiconductors PHYS-747 This course offers an insight into the science of epitaxial growth, a chapter of surface science requiring basic understanding of thermodynamics, crystallography, electronic and optical properties of semiconductors.
