Giovanni De MicheliExpertise
Design technologies for integrated systems on silicon, such as synthesis, hw/sw codesign and low-power design, as well as systems on heterogeneous platforms including electrical and biological components.
Scientific Director of EcoCloud Center at EPFL
Directing activities towards creating sustainable computation including AI.Designing energy-savvy data centers and edge devices.
More information
Please read http://si2.epfl.ch/~demichel/
Giovanni De Micheli is a research scientist in electronics and Jean-Marie FuerbringerJean-Marie Fürbringer graduated with a degree in Physics at EPFL in 1987. Developing his doctoral research on sensitivity analysis of simulation models, he was awarded the doctoral degree by EPFL in 1992.
From 1995 to 1997, Dr Fürbringer was visiting researcher at the NIST in Gaithersburg (Maryland).
In 1997, Dr Fürbringer was appointed visiting professor with the Faculty of Engineering Science at the Catholic University of Lima (PUCP). While at PUCP, he also established and managed the Learning Center of Graña y Montero, which provides training and competency management for the five companies of the group.
In 2001, Dr Fürbringer joined the laboratory of production and processes (LGPP) at EPFL where he led and managed several research projects on competency management and engineering education.
From 2007 to 2010, he was deputy director of the Institute of Mechanical Engineering.
Dr Fürbringer was appointed to the position of deputy dean of the EPFL Doctoral School in 2010 where he has worked till fall 2013.
From November 2013 he has been attached to the Section of Physics as research associate.
Franco VigliottiVice-presidency for institutional affairs, Director (2008-2009)Scientific Advisor to the President of EPFL (2004-2008)Post-doctoral research (2001-2004), California Institute of Technology, Pasadena (CA, USA)MSc (1995), PhD (2000) in Chemical Physics, University of Lausanne
Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Yves PerriardYves Perriard was born in Lausanne in 1965. He received the M. Sc. in Microengineering from the Swiss Federal Institute of Technology - Lausanne (EPFL) in 1989 and the Ph D. degree in 1992. Co-founder of Micro-Beam SA, he was CEO of this company involved in high precision electric drive. Senior lecturer from 1998 and professor since 2003, he is currently director of Laboratory of Integrated Actuators. His research interests are in the field of new actuator design and associated electronic devices. In 2009, he is appointed Vice-Director of the Microengineering Institute in Neuchâtel until 2011. In 2013 the Federal Council has named him the the CTI commission in Bern. In 2014 he is appointed guest professor at Zhejiang University in China. In 2017, the lab is granted by the Werner Siemens Foundation of an amount of 12 millions CHF in order to set up a new Center for Artificial Muscules. Since 2018, he is Expert with Innosuisse, the new Swiss Innovation Agency. http://scholar.google.com/citations?hl=fr&user=V2onuO8AAAAJ https://actu.epfl.ch/news/a-12-million-franc-donation-to-create-a-center-for/ Claudia Rebeca Binder SignerClaudia R. Binder, a Swiss, Canadian and Colombian citizen, was born in Montreal and spent most of her childhood in Switzerland and Colombia. She studied at ETH Zurich from 1985 to 1996, earning a degree in biochemistry and then a PhD in environmental sciences. After conducting her post-doctoral research at the University of Maryland in the US from 1996 to 1998, she returned to Switzerland and took a position as a senior research scientist at ETH Zurich, studying the interaction between human and environmental systems at the Institute for Natural and Social Science Interface. In 2006, Binder joined the University of Zurich as an assistant professor in the Department of Geography, and in 2009 moved to the University of Graz in Austria where she served as a full professor of systems science. In 2011, she took a position at the University of Munich’s Department of Geography as a full professor of human-environment relations.
Binder joined EPFL in March 2016 and set up the Laboratory for Human-Environment Relations in Urban Systems (HERUS) at ENAC; she also holds the La Mobilière Chair on Urban Ecology and Sustainable Living.
Her research involves analyzing, modelling and assessing the transition of urban systems towards sustainability. She looks in particular at how we can better understand the dynamics of urban metabolism, what characterizes a sustainable city, and what drives and hinders transformation processes. She does so by combining knowledge from social, natural and data science. Her research focuses on food, energy, and sustainable living and transport in urban systems.
In Switzerland, Binder was appointed to the Research Council, Programs Division of the Swiss National Science Foundation (SNSF) in 2016 and serves on the Steering Committee of the SNSF’s National Research Program 71, “Managing Energy Consumption” and the Swiss Competence Centers for Energy Research (SCCER). She is also a member of the Steering Board on Sustainability Research for the Swiss Academies of Arts and Sciences. In 2019, she was elected as a member of the University Council of the University of Munich (LMU).
At EPFL, Binder is the academic director of Design Together, a cross-disciplinary teaching initiative. She was appointed to the management team of the Energy Center in 2018 and as head of the working group on EPFL’s energy and sustainability strategy in 2019.
Edgard Gnansounou
-
1983 Ing. Civil EPFL
-
1991 Dr ès Sciences techniques, EPFL
-
Directeur du Laboratoire de systèmes énergétiques (LASEN) de 2003 à 2008
-
Dès 2008, Responsable du groupe de Recherche en Bioénergie et Planification énergétique
-
Co-fondateur du bureau d'étude ENERS Energy Concept
-
Président de la Fondation SUD (Solidarités Universitaires pour le Développement)
Je suis membre de différentes associations professionnelles parmi lesquelles figuent le Conseil Mondial de l'énergie (CME) et l'Association internationale pour l'économie de l'énergie (AIEE). Comme membre du groupe d'étude du CME sur les vulnérabilités, j'ai développé les métriques utilisées pour évaluer la vulnérabilité énergétique des pays industrialisés.
Depuis janvier 2008 : membre du Comité d'édition du journal international Bioresource Technology.
Depuis 2009: membre du Comité de la "European Biofuels Technology Platform" Jean-Louis ScartezziniDirector of EPFL Solar Energy and Building Physics Laboratory (1994-present); Founder & Director of ENAC Institute of Infrastructures, Resources and Environment (2002-2009); Founder & Director of EPFL Doctoral Program in Environment (2002-2009); Co-Director of EPFL Institute of Building Technology (1994-1997); Associate Professor of Building Physics at EPFL (1994-1997); Associate Professor of Building Physics at University of Geneva (1990-1997); Group Leader & Research Fellow at the EPFL Solar Energy Research Group (1981-1989); Research Fellow at the Applied Geophysics Institute of University of Lausanne (1980-1981).
Johan AuwerxJohan Auwerx is Professor at the École Polytechnique Fédérale in Lausanne, Switzerland, where he occupies the Nestle Chair in Energy Metabolism. Dr. Auwerx has been using molecular physiology and systems genetics to understand metabolism in health, aging and disease. Much of his work focused on understanding how diet, exercise and hormones control metabolism through changing the expression of genes by altering the activity of transcription factors and their associated cofactors. His work was instrumental for the development of agonists of nuclear receptors - a particular class of transcription factors - into drugs, which now are used to treat high blood lipid levels, fatty liver, and type 2 diabetes. Dr. Auwerx was amongst the first to recognize that transcriptional cofactors, which fine-tune the activity of transcription factors, act as energy sensors/effectors that influence metabolic homeostasis. His research validated these cofactors as novel targets to treat metabolic diseases, and spurred the clinical use of natural compounds, such as resveratrol, as modulators of these cofactor pathways.
Johan Auwerx was elected as a member of EMBO in 2003 and is the recipient of a dozen of international scientific prizes, including the Danone International Nutrition Award, the Oskar Minkowski Prize, and the Morgagni Gold Medal. His work is highly cited by his peers with a h-factor of over 100. He is an editorial board member of several journals, including Cell Metabolism, Molecular Systems Biology, The EMBO Journal, Journal of Cell Biology, Cell, and Science. Dr. Auwerx co-founded a handful of biotech companies, including Carex, PhytoDia, and most recently Mitobridge, and has served on several scientific advisory boards.
Dr. Auwerx received both his MD and PhD in Molecular Endocrinology at the Katholieke Universiteit in Leuven, Belgium. He was a post-doctoral research fellow in the Departments of Medicine and Genetics of the University of Washington in Seattle.
Paolo GermanoFORMATION
Mars 1990 : Engagement au Laboratoire d'électromécanique et de machines électriques (LEME), devenu entre temps le laboratoire d'actionneurs intégrés (LAI), comme assistant puis comme fonctionnaire scientifique.
Janvier 1990 : Diplôme d'ingénieur EPF en microtechnique.
Juillet 1985 : Maturité de type scientifique.
-
-
- EXPERIENCES ET DOMAINES DE COMPETENCES
-
Modélisation et simulation de l'alimentation des moteurs de l'avion Solar Impulse sur la base des résultats de la modélisation par éléments finis (FEM) de la structure magnétique Développement du banc de mesure (mécanique et software) du moteur Solar Impulse (dès mars 2004);
-
Dans le cadre d'un Projet CTI en collaboration avec l'entreprise Medtronic (Projet ColoStim), développement d'un appareil de traitement de la constipation consistant en des électrodes implantées le long du colon et alimentées par induction, à haute fréquence, à l'aide d'une bobine primaire placée autour du thorax du patient (janvier 2006 - mars 2007);
-
Développement du modèle équivalent d'une montre à glace tactile et analyse de l'effet des décharges électrostatiques sur cette montre. Projet CTI en collaboration avec l'entreprise ETA-Swatch Group (avril 2003 à octobre 2004);
-
Développement d'un système de transfert d'énergie pour navettes automotrices de machines d'assemblage. Projet CTI en collaboration avec l'entreprise Montech AG (octobre 2001 à octobre 2002);
-
Développement d'une installation de transfert d'énergie pour des wagonnets de transport de rouleaux pour l'industrie du papier avec l'entreprise Valmet AG (Groupe Metso Paper) (2001);
-
Développement d'un banc de mesure pour actionneurs linéaires dans le cadre d'un mandat avec l'entreprise Sonceboz SA (mars 1998 - juillet 2000);
-
Développement d'une installation de transfert d'énergie pour un convoyeur d'outils dans le cadre d'un mandat avec l'entreprise MCM SpA (Italie) (juillet 1998 avril 1999 et déc. 1999 avril 2000);
-
Développement d'un banc de test pour vibreur électromécanique dans le cadre d'un mandat avec l'entreprise ASULAB SA à Marin (octobre décembre 1999);
-
Développement et responsabilité d'une installation de démonstration d'un Système de transport automatique à transmission d'énergie par induction - Projet Serpentine 2 PSEL (déc. 1996 juin 1999);
-
Développement d'un banc de mesure et d'analyse pour moteurs à courant continu dans le cadre d'un projet d'impulsion RAVEL (sept. 1995 - mars 1997);
-
Développement d'un convertisseur de fréquence à résonance de 2,4 kW pour l'alimentation d'un transformateur sans fer dans le cadre du transfert d'énergie sans contacts Projet Serpentine PSEL (février 94 déc. 1995);
-
Développement d'un banc de mesure pour moteurs pas à pas dans le cadre d'un mandat avec l'entreprise Sonceboz SA (mars 1992 nov. 1995);
-
Développement d'un convertisseur direct de fréquence AC/AC de basse puissance dans le cadre du projet du cur artificiel Suisse (mars 1990 - mars 1992);
-
Suivi d'une vingtaine de projets de semestre et de master EPFL;
-
Divers projets de moindre envergure (alimentations, démonstrateurs, acquisitions de données, micro-informatique, circuits imprimés).
PUBLICATIONS
DOMAINE DU TRANSFERT D'ENERGIE PAR INDUCTION
M. Jufer, L. Cardoletti, B. Arnet, P. Germano, Ch. Koechli, N. Macabray, M. Perrottet, "Dispositif de transmission d'énergie électrique à un véhicule, sans contact, par induction - Projet PSEL N° 16 - Magnéto-glisseur", Rapport de synthèse 1995, EPFL-DE-LEME, Lausanne - Suisse, 18 octobre 1995;
M. Jufer, L. Cardoletti, P. Germano, B. Arnet, M. Perrottet, N. Macabrey, "Induction Contactless Energy Transmission System for an Electric Vehicle", ICEM96, International Conference on Electrical Machines, Vigo, Sept. 10-12, 1996, Vol II, pp. 343-347;
P. Germano, M. Jufer, "Contactless power transmission: Frequency tuning by a maximum power tracking method", EPE '97, 7th European Conference on power electronics and applications, Trondheim, Sept. 8-10, 1997, Vol IV, pp. 693-697;
M. Jufer, L. Cardoletti, P. Germano, B. Arnet, M. Perrottet, Swiss Federal Institute of Techno-logy, DE-LEME, 1015 Lausanne, Switzer-land, "Inductively powered automatic vehicles - Ser-pen-tine", EVS-15 '98, 15th International Electric Vehicle Symposium and Exhibition, Brussel, Belgium, Sept. 29 - Oct. 3, 1998, pp. 403-404;
P. Germano, Nicolas Macabrey, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "Contactless Power Transmission: Linear Positioning of the Moving Element", EPE '99, 8th European Conference on Power Electronics and Applications, Lausanne, 7-9 September, 1999, Art Nb 685;
P. Germano, M. Jufer, L. Cardoletti, B. Arnet, Ch. Koechli, N. Macabray, M. Perrottet, "Système de transport automatique à transmission d'énergie par induction. - Projet PSEL N° 115", Rapport final 1999, EPFL-DE-LEME, Lausanne - Suisse, 31 août 1999;
P. Germano, I. Stefanini, W. Montella, L. Cardoletti, Y. Perriard, "Système de transfert d'énergie pour navette de machines d'assemblage Projet CTI n° 5780.1 KTS", Rapport final, EPF Lausanne-LAI, Suisse, mars 2004;
I. Stefanini, P. Germano, L. Cardoletti, W. Montella, Y. Perriard, "Inductive Charge System for Assembly Plant Shuttles", CD-ROM, EPE 2003, Toulouse, (France), 2-4 Septembre 2003;
P. Germano, I. Stefanini, Y. Perrirad, "Stimulation colique pour le traitement des troubles de la motilité Projet ColoStim Projet CTI n° 7362.2 LSPP-LS", Rapport final, EPF Lausanne-LAI, Suisse, mai 2007.
DOMAINES DES BANCS DE MESURE - MESURES
P. Germano, "Système automatique de mesure", Rapport technique vol. I & II, EPF-Lausanne, 1995;
P. Germano, Ch. Kuert, "Banc de mesures automatisé pour entraînements électriques", Présentation et mode d'emploi, EPF-Lausanne, 1997;
P. Germano, Ch. Kuert, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "Automated test bench for electric drives: Modular layout of soft- and hardware", EPE '99, 8th European Conference on Power Electronics and Applications, Lausanne, 7-9 September, 1999, Art Nb 683;
Y. Perriard, P. Germano, I. Verettaz, "Banc de test pour vibreur électromécanique", Rapport technique, EPF-Lausanne, janvier 2000;
P. Germano, Ch. Kuert, M. Jufer, Swiss Federal Institute of Technology, DE-LEME, 1015 Lausanne, Switzerland, "DSP controlled automated Test Bench for linear Actuators Design and Choices", EPE 2001, 9th European Conference on Power Electronics and Applications, Graz, 27-29 August, 2001, Art Nb 709;
P. Germano, M. Crivii, D. Demarco, Y. Perriard, Swiss Federal Instutute of Technology, LAI, 1015 Lausanne, Switzerland & L. Paratte, R. Marquis, Service Unit RD, ETA SA (Swatch Group), 2540 Granges, Switzerland, "Analysis and Modeling of Electrostatic Discharge in a Tactile Glass Featured Watch", IAS 2004, 39th Annual Meeting, Seattle, WA, USA, October 3-7, 2004;
P. Germano, M. Crivii, D. Demarco, Y. Perriard, Swiss Federal Instutute of Technology, LAI, 1015 Lausanne, Switzerland & L. Paratte, R. Marquis, Service Unit RD, ETA SA (Swatch Group), 2540 Granges, Switzerland, "Analysis and Modeling of Electrostatic Discharge in a Tactile Glass Featured Watch", IEEE Transaction on Industry Applications, Volume 43, Issue 4, July-aug. 2007, Page(s): 1091-1098; 