Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Tesla coil

Related publications (31)

Modeling and optimization of PCB coils for inductive power transfer systems

Xiaotong Du

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

A modular multiple frequency inductive link to wirelessly power multiple miniaturized implants

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

A modular multiple frequency coils inductive link system to wirelessly provide power for at least a medical implant at an output of a receiving coil, whereby the receiving coil is configured to be implanted in an organism. The modular multiple frequency co ...

2024

DEMO toroidal field coil fast discharge unit integration studies

Roberto Guarino

The Fast Discharge Units (FDUs) of the Superconducting (SC) Toroidal Field (TF) coils in the European demonstration fusion power plant DEMO warrant the machine integrity over its full lifetime against severe failure events, such as SC coil quenches or any ...

Elsevier Science Sa2024

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Rainer Wesche, Roberto Guarino

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

2024

Studies on EU-DEMO 3D coils requirements and conceptual design for error field correction and plasma control

Pierluigi Bruzzone

This work presents the initial studies on the requirements for the design of 3D coils on EU-DEMO. The use of 3D coils in present machines includes two main purposes: the first one is the Error Field Correction (EFC). The EFC aims at minimizing the intrinsi ...

Elsevier Science Sa2023

Modeling and Design Optimization of Loosely Coupled PCB Spiral Coils in Inductive Power Transfer Systems

Drazen Dujic, Xiaotong Du

There are various possibilities to realize coil winding designs for an inductive power transfer system. In order to achieve high power transfer efficiency and power density and explore trade-offs between the two, design optimization around the coil link is ...

2023

Modeling, Optimization and Design of High Power Medium Frequency Transformers

Nikolina Djekanovic

Nowadays, direct current (DC) technology is increasing its presence in alternating current (AC) power systems. This trend is enabled by the progress in energy conversion through semiconductor devices and power electronics. Therefore, it is possible to imag ...

EPFL2023

Computational design and additive manufacturing of electromagnetic coils

Adrien Jean-Michel Thabuis

The modern world is heavily reliant on electromagnetic devices to convert mechanical energy into electrical energy and vice versa. These devices are fundamental to powering our society, and the growing need for automated production lines and electrified tr ...

EPFL2023

Breakdown development in a nanosecond pulsed dielectric barrier discharge in humid air in plane-to-plane geometry

Ivo Furno, Xin Yang, Lorenzo Ibba

We used the ns electric field induced second harmonic (EFISH) generation diagnostic to measure the electric field evolution in a 200 ns pulse, dielectric barrier, plane-to-plane discharge in humid air, on the time scale shorter than the laser pulse duratio ...

Iop Publishing Ltd2023

Predictive modeling of Alfvén eigenmode stability in inductive scenarios in JT-60SA

Javier García Hernández, Antonio José Pereira de Figueiredo, Matteo Vallar

The JT-60SA device offers unique conditions before ITER for the study of the interaction of energetic particles with plasma waves. With similar dimensions to JET, e.g., a major radius but with a slightly more elongated plasma volume, JT-60SA is used as a h ...

Frontiers Media Sa2023

Toward a brightness upgrade to the SwissFEL: A high gradient traveling-wave rf photogun

Mike Seidel

The first generation of S-band injectors for free-electron lasers has illustrated high reliability and performance by driving the latest generation of high brightness machines. However, the ultimate electron beam brightness of these devices is limited by t ...

Amer Physical Soc2023

Characterisation of electron cyclotron wall conditioning plasma in ASDEX Upgrade

Richard Pitts

Electron cyclotron wall condition (ECWC) discharges are characterised in ASDEX Upgrade with full tungsten plasma facing components and X2 polarised waves launched from the equatorial ports, relevant to ECWC conditions in ITER Pre-Fusion Power Operation pha ...

IOP Publishing Ltd2023

Switching losses in power devices: From dynamic on resistance to output capacitance hysteresis

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Armin Jafari, Palliyage Srilak Nirmana Perera, Hongkeng Zhu

In this paper, we review some of the main methods to characterize on-state and off-state losses in wide-band-gap devices under switching conditions. In the off-state, we will discuss about losses related to charging and discharging the output capacitance i ...

IEEE2023

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Kamil Sedlák, Yu Wu

Following the conceptual design, the engineering design of the dc magnet and cable-in-conduit conductor (CICC) for the Super-X test facility has been done in 2021. Totally three types of conductors with different structures were designed for the three pair ...

IEEE Institute of Electrical and Electronics Engineers2023

Design Optimization of a MW-level Medium Frequency Transformer

Drazen Dujic, Nikolina Djekanovic

Nowadays, with the increased interest in applications dealing with high-power medium-voltage conversion, there is a strong need to master the design of medium-frequency transformers, which are one of the key components of modern DC transformers. The paper ...

2022

Preliminary Design of a High Current R&W TF Coil Conductor for the EU DEMO

Pierluigi Bruzzone, Kamil Sedlák, Federica Demattè

Paschen failures in ITER, W7-X and JT60 superconducting coils at the acceptance tests have shown that it is highly desirable to lower the coil discharge voltage (U-d) of the DEMO Toroidal Field (TF) coils. Another benefit of lowering the U-d might be the r ...

IEEE Institute of Electrical and Electronics Engineers2022

The Geometry and Charge of the Streamer Bursts Generated by Lightning Rods under the Influence of High Electric Fields

Farhad Rachidi-Haeri, Marcos Rubinstein

The streamer bursts generated during the initiation and propagation of leaders play an important role in the creation and maintenance of hot discharge channels in air. The most important parameters related to streamer bursts in this respect are the length ...

2022

Inductive Power Transfer System for Auxiliary Power Supply in Medium Voltage Converters

Drazen Dujic, Chengmin Li, Xiaotong Du

Inductive power transfer technology is an attractive solution for medium voltage applications by eliminating the need for high voltage cables or wired connections in general. This paper introduces an inductive power transfer system which has multiple indep ...

2022

Hard and Soft Switching Losses in Power Converters: Role of Transistor Output Capacitance

Palliyage Srilak Nirmana Perera

To best utilize power converters, a sound understanding of the relationship between the circuit topology and the power-semiconductor-device characteristics is required. This is especially important in high-frequency switching, where device parasitics start ...

EPFL2022

Electrical Model of a Wireless mW-Power and Mbps-Data Transfer System Over a Single Pair of Coils

Alexandre Schmid

This paper proposes a system to transfer both mW-power and Mbps-data over an inductive link using a single pair of coils. The system is able to handle a wide range of loads by implementing a load adapter block that divides the operation into two phases: a ...

IEEE2022