Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Vulcanization

Related publications (25)

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Khushdeep Sharma

Polymer optical fibre (POFs) based wearable sensors have attracted a lot of attention in the field of healthcare and biomedical applications. They are in particular envision as the next generation of sensors for the continuous, real-time n ...

EPFL2024

Report of RILEM TC 267-TRM: Improvement and robustness study of lime mortar strength test for assessing reactivity of SCMs

Karen Scrivener, Mohsen Ben Haha, Xuerun Li, Ruben Anton Snellings, Mathieu Antoni, Pawel Tadeusz Durdzinski

RILEM TC 267-TRM is studying tests for the reactivity supplementary cementitious materials (SCMs). In the first phase, the lime reactivity (LR) test, which is standardised in Indian standard (IS)-1727, gave promising correlations with 90-days cement mortar ...

SPRINGER2022

Mechanical Reinforcement of Hydrogels through Physical Crosslinks and Double Network Granular Architecture

Alvaro Lino Boris Charlet

Throughout nature, organisms fabricate a myriad of materials to sustain their lifestyle. Many of the soft materials are composed of water-swollen networks of organic molecules, so-called hydrogels. They generally contribute to the mechanical integrity of t ...

EPFL2022

Increased electromechanical sensitivity of polysiloxane elastomers by chemical modification with thioacetic groups

Yee Song Ko

Chemically cross-linked polydimethylsiloxane (PDMS) elastomers have gained importance as a dielectric in elastic capacitor actuators, which elongate when electrically charged. Common PDMS elastomers have a dielectric permittivity of only about 3 and thus e ...

2020

Flexible support and enhanced groove geometries for gas lubricated bearings

Philipp Kaspar Bättig

Gas lubricated Herringbone-Grooved Journal Bearings (HGJB) are a promising solution to support high-speed rotors in oil-free turbo-machinery due to their compactness, relatively low losses, no need for lubrication and low wear. Gas lubricated bearings, how ...

EPFL2019

In situ Neutron Diffraction during Casting: Determination of Rigidity Point in Grain Refined Al-Cu Alloys

Jean-Marie Drezet, Bastien Gilbert Pierre Mireux

The rigidity temperature of a solidifying alloy is the temperature at which the solid plus liquid phases are sufficiently coalesced to transmit long range tensile strains and stresses. It determines the point at which thermally induced deformations start t ...

Mdpi Ag2014

Fracture Toughness Healing in Epoxy Containing Both Epoxy and Amine Loaded Capsules

Véronique Michaud, Sam Neuser

The feasibility of self-healing epoxy matrices using the same chemistry as the matrix material, namely a standard epoxy-amine system, is demonstrated. The two-component self-healing system is encapsulated in core-shell structures using standard in situ cur ...

Wiley-V C H Verlag Gmbh2014

Determination of Coherency and Rigidity Temperatures in Al-Cu Alloys Using In Situ Neutron Diffraction During Casting

Jean-Marie Drezet, Bastien Gilbert Pierre Mireux

The rigidity temperature of a solidifying alloy is the temperature at which the solid phase is sufficiently coalesced to transmit tensile stress. It is a major input parameter in numerical modeling of solidification processes as it defines the point at whi ...

Springer2014

Elastomeric substrates with embedded stiff platforms for stretchable electronics

Stéphanie Lacour, Alessia Romeo

Stretchable electronics typically integrate hard, functional materials on soft substrates. Here we report on engineered elastomeric substrates designed to host stretchable circuitry. Regions of a stiff material, patterned using photolithography, are embedd ...

American Institute of Physics2013

The physics and micro-mechanics of nano-voids and nano-particles in polymer combinations

In this article the role of voids or particulate inclusions of different sizes on mechanical properties and particularly on toughness in several polymers is discussed. With decreasing void sizes and intervoid distances, the influence of the interphase mate ...

Elsevier Sci Ltd2013

Photo-polymerized epoxy primer for adhesion improvement at thermoplastics/metallic wires interfaces

Jan-Anders Edvin Maansson, Véronique Michaud, Basile Golaz

We report results on the development of an innovative fast-curing coupling method using a UV-curable epoxy primer based on a cycloaliphatic di-epoxide resin to bond metallic wires and a thermoplastic polyurethane matrix. The curing kinetics of the primer a ...

Elsevier Sci Ltd2013

UV-curable epoxy primer for adhesion between metallic oxides and thermoplastic polyurethane

Jan-Anders Edvin Maansson, Véronique Michaud, Basile Golaz

We report results on the development of an innovative fast-curing coupling method using a UV-curable epoxy primer based on a cycloaliphatic di-epoxide resin. The materials to bond are metallic wires and a thermoplastic polyurethane matrix. The curing kinet ...

2012

UV-cured Epoxy for Adhesion in Steel Reinforced Thermoplastic Composites

Basile Golaz

This work addresses the development of composite materials that contain metallic load-bearing cords with the aim of combining outstanding mechanical performance with added functionality, including electrical conductivity, data transmission, and temperature ...

EPFL2012

New/Surface-Modified Biocompatible Polymer for ICD Lead Insulation

The average lifetime of an implanted pacemaker or defibrillator cable (lead) is approximately 10 years. One of the main lead failure mechanisms is deterioration of the insulation, which can be caused by chemical, biological, and mechanical processes. Each ...

EPFL2011

Thermophysical and Thermomechanical Behavior of Cold-Curing Structural Adhesives in Bridge Construction

Omar Moussa

The use of the structural adhesive bonding technique is well established in the aircraft and automotive industries where, in most cases, joints can be fabricated indoors under controlled conditions. In the civil engineering domain, however, load-bearing st ...

EPFL2011

Composite Hydrogels for the Replacement of the Nucleus Pulposus

Ana Borges de Couraça

The intervertebral disc (IVD), which provides flexibility to the spine and facilitates damping and motion, is composed of two distinct structures: the annulus fibrosus (AF) and the nucleus pulposus (NP). The AF, which is fibrous and elastic, confines the N ...

EPFL2010

Elastomer Composites for Actuator Applications

Dielectric elastomers are highly promising as functional materials for the rapidly developing field of flexible actuator and generator technology. They offer a unique combination of low densities and large reversible deformations of up to more than 100% in ...

EPFL2010

Thermal Effects on Physico-Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete

Eugen Brühwiler, Emmanuel Denarié, Aicha Kamen

Material characterization tests of an Ultra High Performance Fiber Reinforced Concrete (UHPFRC) were performed at various ages. A linear relationship was obtained between the mechanical properties and the degree of hydration. In parallel, the influence of ...

2007

Quantitative microstructural characterisation of concrete cured under realistic temperature conditions

Xinyu Zhang

The curing temperature is known to influence the strength and durability of concrete. In general, curing at elevated temperature results in high early strength gain, but impairs the long-term strength and transport properties. Previous investigations have ...

EPFL2007

Physico-mechanical properties of Ultra High Performance Fibre Reinforced Concrete

Eugen Brühwiler, Emmanuel Denarié, Aicha Kamen

The effect of different curing temperatures (from 20 to 40 °C) on the compressive strength and hydration of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) have been investigated between 3 and 28 days, using the loss on ignition test (LOI) and th ...

2006