Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Solomonic column

Related publications (19)

pNEUMA dataset

Nikolaos Geroliminis, Emmanouil Barmpounakis

pNEUMA is an open large-scale dataset of naturalistic trajectories of half a million vehicles that have been collected by a one-of-a-kind experiment by a swarm of drones in the congested downtown area of Athens, Greece. A unique observatory of traffic cong ...

Zenodo2024

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

The new Chapter 9 of Eurocode 8 Part 3 for Seismic Assessment of Existing Steel Structures

Dimitrios Lignos

The seismic assessment of existing steel structures necessitates the development of practice- oriented engineering models for use in nonlinear static and dynamic analysis procedures. These models should encompass the full range of the anticipated nonlinear ...

2023

Seismic vulnerability assessment of free-standing massive masonry columns by the 3D Discrete Element Method

Jinwoo Kim

Free-standing masonry column is a recurrent typology of built cultural heritage. Usually raised without seismic design, columns are subject to intense rocking and overturning under strong ground motions. In this paper, a strategy to assess their seismic vu ...

ELSEVIER SCI LTD2021

Seismic Stability of Wide-Flange Steel Columns Interacting with Embedded Column Base Connections

Dimitrios Lignos, Hiroyuki Inamasu

The rotational flexibility of column base connections is commonly assumed to be detrimental to the seismic response of steel moment-resisting frames (MRFs) because it increases story drift demands and promotes soft-story formation by lowering the point of ...

2019

Proposed Updates to the ASCE 41 Nonlinear Modeling Parameters for Wide-Flange Steel Columns in Support of Performance-Based Seismic Engineering

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady, Alexander Riley Hartloper

Nonlinear static and dynamic analyses are utilized by engineers for performance-based seismic risk evaluation of new and existing structures. In this context, nonlinear component modeling criteria are typically based on ASCE 41 guidelines. Experiments on w ...

2019

Structure from sound with incomplete data

Martin Vetterli, Ivan Dokmanic, Gilles Baechler, Miranda Krekovic

In this paper, we consider the problem of jointly localizing a microphone array and identifying the direction of arrival of acoustic events. Under the assumption that the sources are in the far field, this problem can be formulated as a constrained low-ran ...

2018

The seismic stability and ductility of steel columns interacting with concrete footings

Dimitrios Lignos, Hiroyuki Inamasu

First-story columns in steel moment resisting frames are subjected to various forms of geometric instabilities during earthquakes. These instabilities have the potential to seriously compromise structural performance, and expedite structural collapse. In t ...

American Institute of Steel Construction2017

Collapse Behavior of Steel Columns as Part of Steel Frame Buildings: Experiments and Numerical Models

Dimitrios Lignos

Earthquake-induced collapse risk assessment of steel frame buildings requires the use of deterioration models that simulate instabilities that cause strength and stiffness deterioration of structural steel components. In the case of steel columns in additi ...

International Association of Earthquake Engineering2017

Stability Requirements of Deep Steel Wide-Flange Columns under Cyclic Loading

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady

Just recently, valuable experimental data that characterized the hysteretic behavior of deep wide-flange steel columns (i.e., column depth, d >16 inches) at full-scale became available. Such members are typically used in steel moment-resisting frames (MRFs ...

Structural Stability Research Council2017

Effect of Column Base Flexibility on the Hysteretic Response of Wide Flange Steel Columns

Dimitrios Lignos, Hiroyuki Inamasu

Recent experiments on wide flange steel columns subjected to multi-axial cyclic loading underscore the influence of the member end boundary conditions on strength and stiffness deterioration due to coupling of local and lateral torsional buckling. Field ob ...

2017

Multi-Directional Structural Component Hybrid Testing System for the Assessment of the Seismic Response of Steel I-Shaped Columns

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady

The Multi-Directional Hybrid Testing System (MDHTS) at Polytechnique Montreal is an advanced structural testing system that can be used to study the response of large-scale structural components such as columns, walls, or bridge piers subjected to any comb ...

2016

Experimental Investigation of the Hysteretic Behavior of Wide-Flange Steel Columns under High Axial Load and Lateral Drift Demands

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady

This paper discusses the findings from a large-scale experimental program that characterized the hysteretic behavior of typical steel wide-flange columns in steel moment-resisting frames (MRFs). The test specimens were tested in a cantilever configuration ...

2016

Experimental testing and simulation of bolted beam-column connections having thick extended endplates and multiple bolts per row

Alain Nussbaumer, Luís Costa Borges, Gary Scott Prinz, Shyam Khadka

Retrofit of existing steel buildings often requires strengthening of the connection regions. One common connection, the bolted beam-column connection, is often strengthened in design using stiffened extended endplates, or with continuity plates welded betw ...

Elsevier2014

Behaviour and design of slab-column joints

Aurelio Muttoni, Miguel Fernández Ruiz, Roberto Guidotti

This paper presents an investigation on the behaviour and strength of slab-column joints in multystorey buildings. Such joints may develop different potential failure modes such as crushing of the concrete of the slab (due to column loading), bending or pu ...

fib Symposium Prague 20112011

Poinçonnement non symétrique des dalles en béton armé

Luca Tassinari

Punching shear of reinforced concrete flat slabs supported on columns is a failure mode in which the slab fractures around the column. This type of failure is sudden and can be catastrophic in nature. Punching shear generally governs the ultimate limit sta ...

EPFL2011

Fire endurance performance of cellular GFRP columns with water-cooling system

Thomas Keller, Christian Ludwig, Yu Bai

Experimental results on the fire endurance of full-scale glass fiber-reinforced polymer (GFRP) composite columns are reported in this paper. The pultruded four-cell profiles were first loaded to axial compression (uniform serviceability stress of 5 MPa) an ...

DEStech Publications Inc.2010

New Connection System for Confined Concrete Columns and Beams. II: Theoretical Modeling

Yu Bai

The concept of confined concrete has been widely accepted throughout the structural engineering field, such as the spiral, steel tube, or carbon fiber composite shell confined concrete, etc. In the present study, this concept has not only been used in the ...

2008

Cellular composites based on continuous fibres and bioresorbable polymers

Jan-Anders Edvin Maansson, Pierre-Etienne Bourban

Biocompatible composites, whose porosity and fibre fraction call be tailored over a large range and whose mechanical resistance is comparable to that Of natural bone, were processed with poly(lactic acid) (PLA) and continuous glass fibres. The processing s ...

2008