Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Copper in heat exchangers

Related publications (23)

Thermo-hydro-mechanical behavior of energy barrettes: Field experiments and numerical simulations

Lyesse Laloui, Alessandro Francesco Rotta Loria, Elena Ravera

Over the past two decades, the thermo-hydro-mechanical behavior of earth-contact structures such as piles, walls, slabs, and tunnels, which simultaneously provide structural support and energy supply, has been studied through various field experiments and ...

ELSEVIER2023

Thermal management for gas lubricated, high-speed turbomachinery

Jürg Alexander Schiffmann, Wei Liu, Luis Eric Olmedo Ocampo, Wanhui Liu

High-speed turbomachinery is commonly designed to achieve high power densities. Limited space for active cooling results in a challenging thermal management. A thermal modeling approach leveraging modern declarative programming capabilities is presented, y ...

2023

Analysis of barrette foundations subjected to mechanical and thermal loads

Lyesse Laloui, Alessandro Francesco Rotta Loria

In recent years, there has been increasing interest in the use of rectangular barrette foundations for the structural support and energy supply of tall buildings when circular piles become inefficient or uneconomical. In such applications, so-called energy ...

2022

Flow Boiling of Carbon Dioxide at Different Channel Orientations for the Thermal Management of Future Detector Technologies at the High-Luminosity Large Hadron Collider at CERN

David Schmid

The global warming potential (GWP) of working fluids in thermodynamic cycles and their environmental impact have been gaining considerable attention within the recent years. The global objectives on climate protection are becoming increasingly ambitious, w ...

EPFL2022

Hydrothermal interactions in energy walls

Lyesse Laloui, Alessio Ferrari, Jacopo Zannin

Energy geostructures (EGs) employ heat exchangers embedded in concrete geostructures, such as piles, walls, tunnels, and sewers. In this study, energy walls (EWs) are studied with an emphasis on the following objectives: (1) to understand the fundamentals ...

2021

Experimental Characterization of Additively Manufactured Metallic Heat Exchangers

Mahbod Heidari

In this study, three manifold-microchannel heat exchangers were additively manufactured by direct metal laser sintering. The heat exchangers were manufactured from stainless steel (SS17-4) with an overall dimension of 64.2 x 46.0 x 27.1 mm. The thermal and ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Thermal management of components for high energy physics experiments and space applications

Timothée Robert Sophus Frei

High-energy physics (HEP) experiments and space missions share a common challenge: thermal management in harsh environments. The severe constraints in both fields make cooling of electronic components a major design concern. This thesis aims to develop hig ...

EPFL2021

Machine learning enhancement of thermal response tests for geothermal potential evaluations at site and regional scales

Lyesse Laloui, Alessandro Francesco Rotta Loria, Benoît Claude Henri Cousin

This study explores and validates a machine learning approach for the practical, effective, and precise prediction of the thermo-physical characteristics that are essential for the analysis and design of shallow geothermal systems, including borehole heat ...

2021

Advances in the Soil-Structure Interaction Analysis -- from Surface Footings to Thermoactive Deep Foundations

Cristiano Garbellini

Mutual interactions between soil and foundation play a fundamental role in the overall behaviour of constructions. Therefore, it is not surprising that soil-structure interaction has been the subject of numerous research works. This doctoral thesis is a th ...

EPFL2021

A fast-moving Langmuir probe array for the divertor of the Tokamak à Configuration Variable

Hugo De Oliveira

In next step tokamaks such as ITER and future fusion power plants, wall materials will be subjected to considerably higher heat and particle fluxes than in present-day machines. Maintaining plasma facing components in good condition and simultaneously assu ...

EPFL2021

System for co2 capture from internal combustion engine

François Maréchal, Shivom Sharma

System (2) for CO2 capture from a combustion engine (1) comprising an exhaust gas flow circuit (6) having an inlet end fluidly connected to an exhaust of the combustion engine, a heat exchanger circuit (12), a primary exhaust gas heat exchanger (H1) for tr ...

2020

Thermomechanical behavior of underground energy infrastructures

Jacopo Zannin

The employment of geostructures as structural supports and as heat exchangers represent an effective, renewable and sustainable way to satisfy thermal needs of the built environment. The structural support of conventional geotechnical structures is coupled ...

EPFL2020

Optimal retrofit and investment planning methodologies for improving industrial energy and resource efficiency

Hür Ebuzer Bütün

A major shift in energy systems has started due to drastic changes in climate and air quality, depleting resources, as well as rising social awareness to all these changes. As a result international protocols, such as the Paris agreement, are signed settin ...

EPFL2020

Three-dimensional finite element analysis of piled rafts with energy piles

Lyesse Laloui, Cristiano Garbellini

Over the last twenty years, the importance of environmentally friendly technologies in the field of construction has grown considerably. In this regard, energy piles are an innovative technology that combines the structural role of piles with that of a gro ...

2019

Trade-off designs and comparative exergy evaluation of solid-oxide electrolyzer based power-to-methane plants

François Maréchal, Jan Van Herle, Ligang Wang

Solid-oxide electrolyzer (SOE) based power-to-methane (PtM) system can efficiently store surplus renewable power into synthesis natural gas by electrolysis and methanation. The system performance depends on the operating point of the electrolyzer and syste ...

2019

Ultra-High Power Density Magnetic-less DC/DC Converter Utilizing GaN Transistors

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Georgios Kampitsis

In this paper, a high step-up magnetic-less DC/DC nX converter is designed and experimentally evaluated. GaN transistors are applied in a nX converter topology, yielding ultrahigh power density and high conversion efficiency. The absence of magnetic materi ...

IEEE2019

Optimum ratio of hydrophobic to hydrophilic areas of biphilic surfaces in thermal fluid systems involving boiling

Luis Guillermo Villanueva Torrijo, Tom Larsen

Pool boiling has a high heat removal capability and is considered as one of the most effective cooling methods due to utilization of latent heat of vaporization. Surface wettability plays a key role in boiling heat transfer since it controls the contact li ...

2019

Overview of physics studies on ASDEX Upgrade

Olivier Sauter, Richard Pitts, Stefano Coda, Basil Duval, Timothy Goodman, Yann Camenen, Marco Wischmeier, Nicola Vianello, Alessandro Pau, Cristian Sommariva, Benoît Labit, Laurie Porte, Alberto Bottino, Federico Alberto Alfredo Felici, Emiliano Fable, Antoine Pierre Emmanuel Alexis Merle, Andrea Scarabosio, Alessandro Bortolon, Haomin Sun, Dávid Wágner, Fang Liu, Thomas Binderup Jensen

The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heat ...

IOP Publishing Ltd2019

Fundamental Issues, Technology Development, and Challenges of Boiling Heat Transfer, Critical Heat Flux, and Two-Phase Flow Phenomena with Nanofluids

John Richard Thome

This paper presents a comprehensive and critical review of studies on nucleate pool boiling heat transfer, flow boiling heat transfer, critical heat flux (CHF), and two-phase flow phenomena with nanofluids. First, general analysis of the available studies ...

TAYLOR & FRANCIS INC2019

Two-Phase Flow Simulations within Plate Heat Exchangers

John Richard Thome, Raffaele Luca Amalfi

Plate heat exchangers are widely adopted in many industrial applications, such as ventilation, air conditioning, heat transfer processes, heat pumps and cooling of hydrodynamic circuits in engines. They provide higher heat transfer performance, compactness ...

IEEE2018