Igor TomicTeaching & PhD PhD Students Jakov Oreb Courses Seismic engineering CIVIL-522 This course deals with the main aspects of seismic design and assessment of buildings including conceptual design. It covers different structural design and evaluation philosophies for new and existing reinforced concrete, steel and unreinforced masonry buildings. Stone masonry: Past, present, and future PENS-232 This course introduces students to the historical, structural, and environmental aspe
Alain NussbaumerExpertise
Metallic structuresStructural glassFatigue and fracture mechanicsAssessment of existing structuresUltra low cycle
Teaching & PhD Past EPFL PhD Students Luís Costa Borges, Claire Acevedo, Nariman Maddah, Farshid Zamiri Akhlaghi, Manuel Santarsiero, Luca D'Angelo, Cláudio Alexandre Pereira Baptista, Albano António Sousa, Jagoda Cupac, Ardalan Hosseini, Martin Garcia, Hossein Heydarinouri, Jian Zhan Past EPFL PhD Students as codirector Marina Rocha Courses Design of steel structures CIVIL-2
Savvas SaloustrosEducation PhD | Construction Engineering 2017 – 2017 UPC-BarcelonaTech, Spain MSc | Structural Analysis of Monuments and Historical Constructions (SAHC) 2013 – 2013 University of Padova, Italy & UPC-BarcelonaTech, Spain Diploma | Civil Engineering 2012 – 2012 National Technical University of Athens, Greece Professionals experiences Co-founder & Board Member 2019–2019 FENECStructural Engineer 2019–2019 Windmill Structural Constultants, Barcel
Enrique Corres SojoTeaching & PhD Courses TRC LC3 Research Platform Fribourg PENS-308 The UE TRC-LC3 Research Platform Fribourg will develop prototypes of structural elements in textile reinforced concrete (TRC) and Limestone Calcined Clay Cement (LC3) concrete that allow the continuation of the TRC prototype pavilion started at EPFL in 2019. The UE will take place in EPFL Fribourg.
Jakov OrebTeaching & PhD Courses Stone masonry: Past, present, and future PENS-232 This course introduces students to the historical, structural, and environmental aspects of stone masonry. Emphasis is on understanding the role of stone masonry in architecture, basic structural behavior, and approaches to predict and assess the performance of stone masonry buildings.
Julie Nathalie S GheysenProfessionals experiences PhD student 2018–2022 Université Catholique de Louvain
Teaching & PhD Courses Materials MSE-171 Introduction course of material science applied to usual building materials, especially concrete and metals. Description of their fabrication, mechanical and thermal properties and use in construction. Mechanical behaviour of materials MSE-234 This course provides an introduction to the mechanical behaviour, the processing, the structure and life-cycle o
Mathias Christian Haindl CarvalloTeaching & PhD Courses Stone masonry: Past, present, and future PENS-232 This course introduces students to the historical, structural, and environmental aspects of stone masonry. Emphasis is on understanding the role of stone masonry in architecture, basic structural behavior, and approaches to predict and assess the performance of stone masonry buildings.
Mati Ullah ShahTeaching & PhD Courses Stone masonry: Past, present, and future PENS-232 This course introduces students to the historical, structural, and environmental aspects of stone masonry. Emphasis is on understanding the role of stone masonry in architecture, basic structural behavior, and approaches to predict and assess the performance of stone masonry buildings.
David Carlos Fernandez-Ordoñez HernandezExpertise
Construction.Structures.Concrete.Prefabrication.History of Construction.
Teaching & PhD Courses Design of precast concrete structures CIVIL-414 The course deals with the design of precast reinforced concrete structures, both for bridges and for buildings. The course is focused in learning by projects supplemented by some lectures by the teachers.The students will work in groups to design a precast structure. Drawing structures CIVIL-126 The Drawing Structures I wil
Patricia GuaitaExpertise
pedagogy of makingdrawing as an actionmultidisciplinary projectsdesign methodologies in 1:1 fabricationexperiential learning processesknowledge transfer with the Global Southdiversity and care
Patricia Guaita is an architect, researcher, and educator with expertise in drawing as an action and social and sustainable research projects. Her work focus on design methodologies, which incorporate drawing by hand, 1:1 fabrication, spatial and tectonic analysis, and the development of construction protoco
Konstantinos KarapiperisKostas Karapiperis is an Assistant Professor at EPFL directing the Data-Driven Mechanics Laboratory (LMD). His research lies at the intersection of mechanics, multiscale modeling, and data science, with applications ranging from geomaterials to structural materials. Prior to EPFL, he worked as a Postdoctoral Researcher and Lecturer at the Department of Mechanical and Process Engineering of ETH Zürich, supported by a Marie Sklodowska-Curie Fellowship. He holds a PhD in Applied Mechanics and a Minor in Applie
Nadine BalucTeaching & PhD Past EPFL PhD Students Emmanuelle Giacometti, Raluca Schibli, Gang Yu, Bin Long, Lyubomira Veleva
Anastasios VassilopoulosPERSONAL INFORMATION Name : Anastasios P. Vassilopoulos email : anastasios.vassilopoulos@epfl.ch Tel: 41 21 6936393 Fax: 41 21 6936240 SUMMARY OF QUALIFICATIONS 1995: Dipl. Mechanical Engineer, University of Patras, Greece 2001: Dr Mechanical Engineer, Doctoral thesis in fatigue of composite materials from the Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece CURRENT POSITION Senior Scientist (MER), Composite Construction Laboaratory (CCLab), EPFL PREVIOUS POSITIONS 2006-2012 Research and Teaching Associate, Composite Construction Laboaratory (CCLab), EPFL 2002-2006 Assisstant Professor, Technological Educational Institute (TEI) of Patras, Greece 2001-2003 Post-doctoral Research associate, (Part-time) Dept. Mechanical Engineering and Aeronautics of the University of Patras, Greece. EDUCATION 1990 - 1995 Graduate student, Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece October 1994-January 1995 Dept. Mechanical Engineering, University of Bristol, U.K. (In the frame of Erasmus project for the final year thesis, under the supervision of Prof. R. D. Adams) 1995 - 2000 Research assistant, Dept. Mechanical Engineering and Aeronautics, University of Patras. LANGUAGES English, Greek, French COMMUNITY ACTIVITIES (Member of) Council of the European Society of Composite Materials (ESCM) Council of the European Society of Experimental Mechanics (EuraSEM) The European Structural Integrity Society (ESIS) The European Energy Research Alliance (EERA, JP WIND) The Technical Chamber of Greece (TCG) The Hellenic Association of Mechanical & Electrical Engineers SCIENTIFIC-RESEARCH INTERESTS Experimental methods for the study of the behavior of composite materials under static and fatigue loading Development of analytical methods for the study of the behavior of FRP composite materials under variable amplitude complex stress states Development of fatigue life prediction methodologies for composite materials and structures Design of constructions with composite materials Sangwoo KimSangwoo Kim is set to join EPFL as a Tenure Track Assistant Professor in September 2023. Prior to his appointment at EPFL, he served as a postdoctoral fellow in the Department of Mechanical Engineering at the University of California, Santa Barbara. He earned his graduate degree in Theoretical and Applied Mechanics from the University of Illinois at Urbana-Champaign, where his research delved into the relationships between statistics, geometry, and mechanical states in cellular matters. Currently, his research focus on fundamental understanding of biological and living systems, as well as the study of soft and active matter employing principles from mechanics and physics. His research interests encompass embryonic development, tissue morphogenesis, structure and mechanics of soft materials, inherent structure of amorphous materials, and non-equilibrium dynamics of active matter.
Virginia CarnevaliExpertise
Theoretical condensed matter physics: theory and simulations of structural, electronic, magnetic and optical properties (Quantum ESPRESSO), ab-initio molecular dynamics (CP2K), and Kinetic Monte Carlo codes; automate Quantum ESPRESSO workflows and high-throughput calculations (AFLOWÏ€); generation of tight-binding hamiltonians, transport properties, and data analysis (PAOFLOW).Materials for photovoltaic: Pb- and Sn-based organic perovskites; investigation and improvement of the HTL-ETL interaction
Thomas La GrangeExpertise
Electron Microscopy, Aberration Correct Scanning Transmission Electron Microscopy, Electron Diffraction, Ultrafast Transmission Electron Microscopy, Electron Energy Loss Spectroscopy, Energy Dispersive Spectroscopy, Materials Science, High-speed deformation, Dislocation Dynamics, Skyrmionics, Martensitic Phase Transformation Theory, Solidification
Expertise
Electron Microscopy, Aberration Correct Scanning Transmission Electron Microscopy, Electron Diffraction, Ultrafast Transmission Electron Micro
Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Véronique MichaudBackground:
1994 Habilitation à diriger des recherches ( INPG, France)
1991 PhD in Materials Engineering ( MIT, USA)
1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France)
Activities:
Since January 2018: Associate Dean of Engineering, in charge of Education
June 2012-Dec.2017: Head of the Materials Science and Engineering Section
Since April 2017: Associate Professor at EPFL
2009-2017 : Professeur Titulaire at EPFL
1997-2009: Researcher at EPFL
1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France)
1991-1994 : Post-doctoral research associate, MIT (USA)
Author of about 300 publications of which 140 in peer-reviewed journals
Nicolas GrandjeanNicolas Grandjean received a PhD degree in physics from the University ofNice Sophia Antipolis in 1994 and shortly thereafter joined the French National Center for Scientific Research (CNRS) as a permanent staff member. In 2004, he was appointed tenure-track assistant professor at the École polytechnique fédérale de Lausanne (EPFL) where he created the Laboratory for advanced semiconductors for photonics and electronics. He was promoted to full professor in 2009. He was the director of the Institute of Condensed Matter Physics from 2012 to 2016 and then moved to the University of California at Santa Barbara where he spent 6 months as a visiting professor. Since 2018, he is the head of the School of Physics at the EPFL. He was awarded the Sandoz Family Foundation Grant for Academic Promotion, received the “Nakamura Lecturer” Award in 2010, the "Quantum Devices Award” at the 2017 Compound Semiconductor Week, and “2016 best teacher” award from the EPFL Physics School. His research interests are focused on the physics of nanostructures and III-V nitride semiconductor quantum photonics.
Guillaume Romain ObozinskiGuillaume Obozinski is Deputy Chief Data Scientist at the Swiss Data Science Center. He graduated with a PhD in Statistics from UC Berkeley in 2009. He did his postdoc and held until 2012 a researcher position in the Willow and Sierra teams at INRIA and Ecole Normale Supérieure in Paris. He was then Research Faculty at Ecole des Ponts ParisTech until 2018. Guillaume has broad interests in statistics and machine learning and worked over time on sparse modeling, optimization for large scale learning, graphical models, relational learning and semantic embeddings, with applications in various domains from computational biology to computer vision.
