Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Epicyclic gearing

Related publications (18)

Domain knowledge-informed synthetic fault sample generation with health data map for cross-domain planetary gearbox fault diagnosis

Olga Fink

Extensive research has been conducted on fault diagnosis of planetary gearboxes using vibration signals and deep learning (DL) approaches. However, DL-based methods are susceptible to the domain shift problem caused by varying operating conditions of the g ...

ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD2023

Principle and Analysis of Radial-Force-Based Swirling Actuator for Low-Speed High-Torque Applications

Adrien Jean-Michel Thabuis

This article proposes a swirling actuator that uses the electromagnetic radial force and mechanical gears to generate rotational torque. The proposed actuator generates a rotating radial force between an inner stator and a swirler. The gears on the swirler ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

An elastic rod in frictional contact with a rigid cylinder

Pedro Miguel Nunes Pereira de Almeida Reis, Tomohiko Sano, Paul Grandgeorge

We investigate the load transmission along an elastic rod of finite cross-section in contact with a rigid cylinder, as system often referred to as the generalized capstan problem. In the presence of friction, the idealized classic capstan equation predicts ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Optical rotating torque sensor with nano newton-meter resolution based on a hanging torsion wire

Simon Nessim Henein, Etienne Frédéric Gabriel Thalmann, Billy Nussbaumer

This article presents a novel torque measuring setup working in the nano newton-meter range. The central novelty is a long (1 meter range) thin (diameter of a few tens of micrometers) metallic wire used instead of the relatively stiff torsion zone of the s ...

euspen2021

Wearable exoskeletons to support ambulation in people with neuromuscular diseases, design rules and control

Amalric Louis Ortlieb

Neuromuscular diseases are degenerative and, thus far, incurable disorders that lead to large muscle wasting. They result in constant deterioration of activities of daily living and in particular of ambulation. Some common types include Duchenne muscular d ...

EPFL2019

Compound micromachines powered by acoustic streaming

Mahmut Selman Sakar, Murat Kaynak, Furkan Ayhan

This paper presents the design, fabrication, and operation of compound micromachines powered by acoustic streaming. The machine components were directly incorporated around pillars serving as shafts without further assembly steps using a single-step in sit ...

IEEE2019

Étude des engrenages de microtechnique

Quentin Theurillat-Bonjour

The research presented in this thesis addresses the design of gear drives for micro engineering applications, and was performed in collaboration with a watch manufacturer. Gears have long been found in many fields of mechanical engineering. Their use in wa ...

EPFL2016

Adaptive Morphology: A Design Principle for Multimodal and Multifunctional Robots

Dario Floreano, Stefano Mintchev

Morphology plays an important role in behavioral and locomotion strategies of living and artificial systems. There is biological evidence that adaptive morphological changes can not only extend dynamic performances by reducing tradeoffs during locomotion b ...

Ieee-Inst Electrical Electronics Engineers Inc2016

Fabrication of slender elastic shells by the coating of curved surfaces

François Gallaire, Pedro Miguel Nunes Pereira de Almeida Reis, Gioele Mariano Nicolò Balestra, Pierre-Thomas Paul Brun

Various manufacturing techniques exist to produce double-curvature shells, including injection, rotational and blow molding, as well as dip coating. However, these industrial processes are typically geared for mass production and are not directly applicabl ...

Nature Publishing Group2016

On The Optimization And Performances Of A Compact Piezoelectric Impact Mems Energy Harvester

Nico de Rooij, Danick Briand, Pattanaphong Janphuang, Robert Andrew Lockhart

This paper presents the development of a compact energy harvesting configuration to convert low frequency, mechanical oscillations into usable electrical energy using AFM-like MEMS piezoelectric cantilevers coupled to a rotating gear. In this approach, one ...

IEEE2014

Phase-Shift Master-Slave Mechanisms for High Angular-Speed Wedge-Prism Systems

Reymond Clavel, Olivier Chappuis

Laser micro-machining requires high dynamic laser spot trajectory and accuracy to control the laser beam scanning. A well-known technique to scan a laser beam over a specimen is to use a pair of wedge-prisms. However, it is difficult to master-slave the ph ...

Taylor & Francis Inc2013

Energy scavenging from a rotating gear using an impact type piezoelectric mems scavenger

Nico de Rooij, Danick Briand, Pattanaphong Janphuang, Don Isarakorn

A device for energy harvesting from an impact by using a piezoelectric MEMS harvester comprising at least a gear (1) driven by an inertial mass system and a piezoelectric transducer (2) located over the gear in order to keep the system as compact as possib ...

2012

Reliable MEMS Actuators for Driving Large Microsystems

Nicolas Bernard Golay

Nowadays many consumer electronic devices are using small engines (micromotors). Thanks to technological innovation, the components can be imbedded into numerous portable systems. The key factors for a nomadic integration are: reduction of power consumptio ...

EPFL2010

A hybrid ultrasonic motor and electrorheological fluid clutch actuator for force-feedback in MRI/fMRI

Hannes Bleuler, Roger Gassert, Dominique Chapuis

This paper presents a safe, electrically powered MR-compatible actuator with a large range of output impedance, which can be used at the entry of the scanner bore. This actuator is composed of an ultrasonic motor (USM) and a torque-controlled electrorheolo ...

2008

A Haptic Knob with a Hybrid Ultrasonic Motor and Powder Clutch Actuator

Hannes Bleuler, Roger Gassert, Dominique Chapuis

In haptics, the forces to be displayed vary widely in terms of magnitude and bandwidth. A single actuator can hardly comply with these requirements. It has thus been proposed to combine electrical motors and passive devices in a hybrid actuator to cover a ...

2007

Effect of filler behavior on nanocomposite SU8 photoresist for moving micro- parts

Philippe Renaud, Arnaud Bertsch, Stefano Mischler, Sébastien Jiguet

The use of low-stress SU8 nanocomposites as a functional material for micro- parts and coating applications is described in this paper. It was found that the nanoparticles lower the internal stress and decrease the wear rate and frictional coefficient of t ...

2006

Dynamics of torque control continuously variable transmissions

Robert Fuchs

With the increasing concerns in the impact of automotive emissions of CO2 and NOx on the environment combined with today's speculation on oil crude supply, the need to find solutions reducing the fuel consumption and emission of tomorrow's cars is more tha ...

EPFL2006

Hybrid Ultrasonic Motor and Electrorheological Clutch System for MR-Compatible Haptic Rendering

Hannes Bleuler, Roger Gassert, Dominique Chapuis

Using haptic interfaces in combination with functional magnetic resonance imaging (fMRI) could lead to important insights into the brain mechanisms of human motor control and related dysfunctions. However, in addition to the usual requirements for haptic i ...

IEEE2006