Savvas SaloustrosEducation PhD | Construction Engineering 2017 – 2017 UPC-BarcelonaTech, Spain MSc | Structural Analysis of Monuments and Historical Constructions (SAHC) 2013 – 2013 University of Padova, Italy & UPC-BarcelonaTech, Spain Diploma | Civil Engineering 2012 – 2012 National Technical University of Athens, Greece Professionals experiences Co-founder & Board Member 2019–2019 FENECStructural Engineer 2019–2019 Windmill Structural Constultants, Barcel
Igor TomicTeaching & PhD PhD Students Jakov Oreb Courses Seismic engineering CIVIL-522 This course deals with the main aspects of seismic design and assessment of buildings including conceptual design. It covers different structural design and evaluation philosophies for new and existing reinforced concrete, steel and unreinforced masonry buildings. Stone masonry: Past, present, and future PENS-232 This course introduces students to the historical, structural, and environmental aspe
Julie Nathalie S GheysenProfessionals experiences PhD student 2018–2022 Université Catholique de Louvain
Teaching & PhD Courses Materials MSE-171 Introduction course of material science applied to usual building materials, especially concrete and metals. Description of their fabrication, mechanical and thermal properties and use in construction. Mechanical behaviour of materials MSE-234 This course provides an introduction to the mechanical behaviour, the processing, the structure and life-cycle o
Mathias Christian Haindl CarvalloTeaching & PhD Courses Stone masonry: Past, present, and future PENS-232 This course introduces students to the historical, structural, and environmental aspects of stone masonry. Emphasis is on understanding the role of stone masonry in architecture, basic structural behavior, and approaches to predict and assess the performance of stone masonry buildings.
Jakov OrebTeaching & PhD Courses Stone masonry: Past, present, and future PENS-232 This course introduces students to the historical, structural, and environmental aspects of stone masonry. Emphasis is on understanding the role of stone masonry in architecture, basic structural behavior, and approaches to predict and assess the performance of stone masonry buildings.
Mati Ullah ShahTeaching & PhD Courses Stone masonry: Past, present, and future PENS-232 This course introduces students to the historical, structural, and environmental aspects of stone masonry. Emphasis is on understanding the role of stone masonry in architecture, basic structural behavior, and approaches to predict and assess the performance of stone masonry buildings.
Alain NussbaumerExpertise
Metallic structuresStructural glassFatigue and fracture mechanicsAssessment of existing structuresUltra low cycle
Teaching & PhD Past EPFL PhD Students Luís Costa Borges, Claire Acevedo, Nariman Maddah, Farshid Zamiri Akhlaghi, Manuel Santarsiero, Luca D'Angelo, Cláudio Alexandre Pereira Baptista, Albano António Sousa, Jagoda Cupac, Ardalan Hosseini, Martin Garcia, Hossein Heydarinouri, Jian Zhan Past EPFL PhD Students as codirector Marina Rocha Courses Design of steel structures CIVIL-2
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Konstantinos KarapiperisKostas Karapiperis is an Assistant Professor at EPFL directing the Data-Driven Mechanics Laboratory (LMD). His research lies at the intersection of mechanics, multiscale modeling, and data science, with applications ranging from geomaterials to structural materials. Prior to EPFL, he worked as a Postdoctoral Researcher and Lecturer at the Department of Mechanical and Process Engineering of ETH Zürich, supported by a Marie Sklodowska-Curie Fellowship. He holds a PhD in Applied Mechanics and a Minor in Applie
Herbert SheaExpertise
soft robotics, wearable haptics, electrostatic actuators, EHD
Mission
My lab develops flexible polymer-based actuators for a wide range of applications including haptics and soft robotics. More info at https://www.epfl.ch/labs/lmts/
Links from EPFL-LMTS Lab webpage People Research ActivitiesPublications TeachingPublications and Conference papers Link to my lab Education PhD | Physics 1997 – 1997 Harvard University MA | Physics 1993 – 1993 Harvard University David HackerExpertise
Animal cell cultivationTransient transfectionStable cell line generationExpression vector designProtein purification
Teaching & PhD Past EPFL PhD Students as codirector Agata Oberbek, Yashas Rajendra, Xiao Shen, Dominique Terry Monteil Jr, Sowmya Balasubramanian Courses Recombinant protein expression in animal cells for appli-cations in medicine and structural biology BIO-701 Cultivated animal cells are important hosts for the production of recombinant proteins for biochemical and
Nadine BalucTeaching & PhD Past EPFL PhD Students Emmanuelle Giacometti, Raluca Schibli, Gang Yu, Bin Long, Lyubomira Veleva
Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
Sangwoo KimSangwoo Kim is set to join EPFL as a Tenure Track Assistant Professor in September 2023. Prior to his appointment at EPFL, he served as a postdoctoral fellow in the Department of Mechanical Engineering at the University of California, Santa Barbara. He earned his graduate degree in Theoretical and Applied Mechanics from the University of Illinois at Urbana-Champaign, where his research delved into the relationships between statistics, geometry, and mechanical states in cellular matters. Currently, his research focus on fundamental understanding of biological and living systems, as well as the study of soft and active matter employing principles from mechanics and physics. His research interests encompass embryonic development, tissue morphogenesis, structure and mechanics of soft materials, inherent structure of amorphous materials, and non-equilibrium dynamics of active matter.
Yoan Désiré DuhooTeaching & PhD Courses Integrative structural biology for Life sciences BIO-643 Hands-on course in Biomolecular Integrative Structural Biology by SV experts in the field of X-ray crystallography, cryo-Electron Microscopy, Bio-NMR and protein modeling tools. No previous knowledge in Structural Biology or Bioinformatics is required. Recombinant protein expression in animal cells for appli-cations in medicine and structural biology BIO-701 Cultivated animal cells are important
Kelvin Ka Ching LauExpertise
Protein expressionProtein purificationProtein characterizationProtein-protein interactionsX-ray crystallographyStructural biologyProtein biophysics
Mission
I am trained in biochemistry and structural biology and have keen interest in protein-protein interactions. Here to help solve your problems!
Education PhD | Biochemistry and Molecular Biology 2008 – 2014 University of British Columbia Directed by Filip van Petegem Bachelor of Science | Honours Bi
Nicolas ThomäTeaching & PhD PhD Students David Domjan, Pierre Alexander Miranda Herrera, Laurin Tim Kanis, Alessandro Minafra, Pau Reolid Coll Courses Practical - Thomä Lab BIO-624 Expression and purification of recombinant proteins are key methods in our lab studying protein machines on a structural level and ways in which they can be reprogrammed by small molecules. In the course, we will express and purify proteins and biophysically characterise them. Trends in chemical biology and drug discovery
Patricia GuaitaExpertise
pedagogy of makingdrawing as an actionmultidisciplinary projectsdesign methodologies in 1:1 fabricationexperiential learning processesknowledge transfer with the Global Southdiversity and care
Patricia Guaita is an architect, researcher, and educator with expertise in drawing as an action and social and sustainable research projects. Her work focus on design methodologies, which incorporate drawing by hand, 1:1 fabrication, spatial and tectonic analysis, and the development of construction protoco
Stefana ParaschoTeaching & PhD PhD Students Jingwen Wang, Gabriel Vallat, Maxence Grangeot, Eleni Maria Skevaki, Wenqian Yang, Megi Sinani Courses Capitalizing on Uncertainty AR-809 SUMMER SCHOOL - Capitalizing on Uncertainty is a 6-day Summer school exploring uncertainty as a productive resource in design and fabrication through lectures, hands-on experiments, and the collaborative design and construction of a full-scale structure in a human-robot fabrication setting. Digital design and making: A criti
Luciano Andres AbriataExpertise
Protein NMRNMR of paramagnetic systemsMetalloproteinsBiomolecular SpectroscopyStructural BiologyStructural BioinformaticsMolecular Modeling
ResearchPapers Link to Google Scholar
Teaching & PhD Courses Basic and advanced NMR - Level 1 A (EPFL) CH-601(x) Basic theoretical and experimental aspects of NMR will be taught. Students will be familarized with modern NMR spectrometers. Basic and advanced NMR - Level 2 (EPFL) CH-703 The goal is to give a sound theoretical an
