Simona FrateschiExpertise
Occupational Health and Safety Specialist.Biosafety Specialist.
Pub Med
Simona Frateschi publications
Federica Sandronefrom 2008: Engineer at SBB-Infrastructure, responsible for Tunnels Management and Maintenance from 2007: Assistant for the courses "Tunnel Engineering" and "Underground Construction Technology" 2004-2008: PhD Student (Structure Doctoral Program) at LMR-EPFL PhD degree: February 2008 at EPFL with a thesis entitled "Analysis of pathologies and long term behaviour of the Swiss National Road tunnels" 2003: Assistant at the Georesources and Landscape Department of Politecnico di Torino (TUSC). Main research domains: in situ surveys, monitoring measurements analysis and numerical modelling on tunnels with ageing problems and/or collapses, settling and subsiding in chalk pit, instability of slope dumps, interaction between cutting-tools of a TBM and the rock-mass 2003: Graduate at the Politecnico di Torino in Geotechnical Engineering with a Master Thesis about Stability controls and refurbishment operations on a damaged railway tunnel
Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Konstantin MikityukExpertise
Generation-IV fast reactors, advanced modeling, coupled neutronics and thermal hydraulics, sodium boiling
Paul Scherrer Institut
Fast Reactors Group LeaderLaboratory for Reactor Physics and Systems BehaviourNuclear Energy and Safety DepartmentOHSA/D115232 Villigen PSISwitzerlandE-mail: konstantin.mikityuk@psi.chTel: +41 56 310 23 85
Since 1992 I have been involved in research of safety-related aspects of various nuclear reactors with fast neutron spectrum: first at Russian Kurchatov Institute and Didier TronoAfter obtaining an M.D. from the University of Geneva and completing a clinical training in pathology, internal medicine and infectious diseases in Geneva and at Massachusetts General Hospital in Boston, Didier Trono embarked in a scientific career at the Whitehead Institute for Biomedical Research of MIT. In 1990, he joined the faculty of the Salk Institute for Biological Studies to launch a center for AIDS research. He moved back to Europe seven years later, before taking the reins of the newly created EPFL School of Life Sciences, which he directed from 2004 to 2012. He is now actively engaged in the efforts of Switzerland to integrate new technologies in the fields of precision medicine and personalized health.
Eugen Brühwilerbirth date: 19.11.1958 nationality: Swiss (native from Dussnang, Canton of Thurgau) Education : - July 1988 : doctoral degree from the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland with a thesis entitled Fracture mechanics of dam concrete subjected to quasi-static and seismic loading conditions - December 1983 : civil engineering diploma (university degree) from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland Professional Experience : - Since 1st April 1995 : Professor of Structural Engineering at EPFL and Head of the Laboratory of Maintenance, Construction and Safety for Civil Structures (MCS) (often considered being the first chair worldwide devoted exclusively to existing civil structures). - 1991-94 Project Manager and structural engineer with the Swiss Federal Railways (SBB), Division of Bridges and Structures, Zurich: Monitoring and maintenance of bridges and structures, Project manager and checking engineer for the construction of new bridges and rehabilitation of existing bridges. - 1989/90 Research associate at the Department of Civil Engineering, University of Colorado, Boulder, USA : Fracture mechanics of concrete and fracture of concrete dams. - 1986-88 Doctoral student at EPFL-LMC (Building Materials, Prof. Wittmann) : Fracture mechanics of concrete, fracture of concrete dams under seismic loading - 1984/85 Research engineer at EPFL-ICOM (Steel Structures, Prof. Badoux and Prof. Hirt) : Fatigue behaviour and fracture mechanics of riveted bridges
Giovanni De MicheliExpertise
Design technologies for integrated systems on silicon, such as synthesis, hw/sw codesign and low-power design, as well as systems on heterogeneous platforms including electrical and biological components.
Scientific Director of EcoCloud Center at EPFL
Directing activities towards creating sustainable computation including AI.Designing energy-savvy data centers and edge devices.
More information
Please read http://si2.epfl.ch/~demichel/
Giovanni De Micheli is a research scientist in electronics and Annik NanchenTeaching & PhD Courses Safety of chemical processes ENG-431 The main focus of the lecture is on reactive hazards (thermal process safety) + introduction to explosion protection. While being based on theory, the lecture is oriented towards industrial practice.The lecture is 7x4h Sustainable chemistry and engineering in Industry CH-407 In the course given by experts from the Swiss Chemical industry, the students will be introduced in key concepts of sustainable chemistry and ch
Thierry MeyerThierry Meyer received in 1986 a diploma degree (MSc) in chemical engineering from the Swiss Federal Institute of Technology at Lausanne (EPFL). He was awarded in 1989 a PhD at EPFL for his thesis on micromixing in highly viscous polymeric media. He joined the Institute of Chemical Engineering from 1989 till 1993 as senior scientist in the field of polymerization reactions. In 1994 he joined Ciba-Geigy SA in the pigment division as successively development chemist, head of development a.i. and finally production manager for high performance pigments. Returning to the Institute of Chemical Engineering at EPFL in Lausanne by the end of 1998, he was nominated maître denseignement et de recherche (MER) for leading a new research group in the field of polymers and supercritical fluids, and teaching to chemists, chemical engineers and material sciences, disciplines as process development, introduction to chemical engineering, polymer and organic chemistry at master and bachelor program. In 2005 he owned the responsibility of the Occupational Health and Safety of the school of basic sciences on top of his research activities dealing with risk management and supercritical fluids. He is presently teaching introduction to chemical engineering at bachelor level, risk management at master level and specific courses on safety and engineering risk management in continuing education. He acts also as consultant and expert in risk assessment and chemical engineering matters by the ICC (International Chamber of Commerce) of the World Business Organization, by several consultancy companies and by major and SMEs chemical industries. Thierry Meyer is currently member of several international associations of the European Federation of Chemical Engineering, American institution of chemical engineering, American chemical society and senior member of the American Institute of Chemical Engineers. He was elected chairman of the European Working Party on Polymer Reaction Engineering from 2001 till 2006. He his currently the Swiss academic member of the European Working Party on Loss Prevention and Safety Promotion as well as of the European Working Party on Education. He is member of several editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Show more