Concept

Crucible steel

Related publications (24)

Micromechanics of oxide inclusions in ferrous alloys

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Microscopic Digital Image Correlation Analysis of Strain Distributions in Stainless Steel 316L Induced by Multiaxial Cyclic Loading

Elif Cansu Kursun

Fatigue damage in materials results in localized strain at the microstructural level. In many engineering components of the cooling circuits of nuclear power plants, where austenitic steels are used, the material experiences multiaxial cyclic loading, eith ...

EPFL2023

Conceptual design of 1000 m scale steel-UHPFRC composite truss arch bridge

Jieping Zhu, Xiujiang Shen

Excessive self-weight and difficulty in construction are the main issues confronted by super-long-span arch bridges. To address these issues, a conceptual design of steel-ultra-high performance fibre-reinforced concrete (UHPFRC) composite truss arch bridge ...

ELSEVIER SCI LTD2021

Reduced-order Models for Simulating Coupled Geometric Instabilities in Steel Beam-columns Under Inelastic Cyclic Straining

Alexander Riley Hartloper

Numerical models that can simulate coupled geometric instabilities in steel beam-columns are required for the seismic assessment of certain steel moment-resisting frames. Reliably simulating coupled instabilities requires that the steel material is precise ...

EPFL2021

Cyclic metal plasticity model parameters with limited information: a constrained optimization approach

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Alexander Riley Hartloper

Tensile test data for structural steels are ubiquitous. Yet, the information monotonic loading provides with respect to the material's characteristics is limited. Notably, features of inelastic response to cyclic loading, such as the Bauschinger eect, can ...

2021

Measurement and prediction of the transformation strain that controls ductility and toughness in advanced steels

William Curtin, Helena Van Swygenhoven, Francesco Maresca

New-generation multi-phase martensitic steels derive their high strength from the body-centered cubic (BCC) phase and high toughness from transformation of the metastable face-centered cubic (FCC) austenite that transforms into martensite upon loading. In ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Fiber-based hysteretic model for simulating strength and stiffness deterioration of steel hollow structural section columns under cyclic loading

Dimitrios Lignos

An efficient component model has been developed that captures strength and stiffness deterioration of steel hollow structural section (HSS) columns. The proposed model consists of two fiber-based segments at a member's ends along with an elastic segment in ...

2020

Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction

Jean-Marie Drezet

Near interfacial residual stresses are investigated in a joint composed of aluminum alloy and dual phase steel. A small step neutron diffraction scan was initially performed to determine the weld interface position along the measured transverse cross secti ...

ELSEVIER SCIENCE SA2019

Interface microstructure formation of dissimilar Fe/Fe-Mn-C steel RSW joints

Léa Deillon

An experiment was developed to simulate the interface between liquid high manganese carbon steel and solid ultra-low alloyed steel in a thermal gradient, corresponding to the nugget/sheet interface of resistance spot welds. Despite the large difference in ...

Elsevier Science Sa2018

Improving the collapse risk of steel structures with high-performance steel

Dimitrios Lignos

With the advent of material science, high-performance steel materials have been developed for seismic applications that potentially reduce the earthquake-induced collapse risk of steel frame buildings. The High Yield Point (HYP400) steel is one of those ma ...

2018

Optimisation of Current and Pulse Duration in Electric Discharge Drilling of D2 Steel Using Graphite Electrode

Ny Andry Iasy Ralisa

Electric discharge machining (EDM) is one of the viable techniques for machining of D2 steel, in which the material removal occurs by spark erosion. The poor selection of EDM parameters affect the machining quality and productivity. Considering this, the p ...

2018

Corrosion mechanisms and durability models for historical tinplate food cans

Fabio Cova Caiazzo

Since the early of the 19th century, canning is one the most efficient ways to preserve foods. Tinplated steel has been used since the beginning for this purpose and it is still one of the most used materials for cans production because it combines the goo ...

EPFL2018

Fiber-based model for earthquake-induced collapse simulation of steel frame buildings

Dimitrios Lignos

Earthquake-induced collapse risk assessment of steel frame buildings requires the use of simulation models that can realistically replicate dynamic instability of frame buildings. Such models for steel columns should consider the coupling between the axial ...

2018

Status Status of the final design of the EC UPP launcher

René Chavan, Jean-Daniel Landis

Four EC H&CD (Electron Cyclotron Heating and Current Drive) launchers will be installed into the upper ports #12, #13, #15 and #16 in ITER. Beside plasma heating their main purpose is to counteract plasma instabilities by injecting up to 20 MW of microwave ...

ELSEVIER SCIENCE SA2018

The microstructure, mechanical properties and corrosion resistance of 316 L stainless steel fabricated using laser engineered net shaping

The mechanical properties and corrosion resistance of 316 L stainless steel fabricated using the Laser Engineered Net Shaping (LENS) technique have been studied. The crack-free, full density samples made using SS316L alloy powder and the LENS technique are ...

Elsevier Science Sa2016

Modelling of the in-plane behaviour of masonry walls strengthened with polymeric grids embedded in cementitious mortar layers

Angelo Garofano

The seismic reinforcement of masonry walls needs to be carried out through appropriate and effective techniques aiming at providing both adequate strength and displacement capacity. The present research concerns experimental results about the in-plane beha ...

Elsevier2016

Crack tip blunting and cleavage under dynamic conditions

William Curtin

In structural materials with both brittle and ductile phases, cracks often initiate within the brittle phase and propagate dynamically towards the ductile phase. The macroscale, quasistatic toughness of the material thus depends on the outcome of this micr ...

Elsevier2016

Design and experimental verification of an innovative steel–concrete composite beam

Jean-Paul Lebet, Dimitrios Papastergiou

This paper deals with the design method and the experimental verification of a new type of steel–concrete composite beam under static and fatigue loading. The connection is an alternative solution for steel–concrete composite bridges suitable for prefabric ...

Elsevier2014

Load dependence of oxidative wear in metal/ceramic tribocouples in fretting environment

Abhishek Tewari

For a large number of non-oxideceramic/metal as well as for non-oxide particulate reinforced composite/metal tribocouples,oxidative wear is reported to play a major role in the overall damage and material removal process.The designing of new materials with ...

2012

Two strain-hardening mechanisms in nanocrystalline austenitic steel: An in situ synchrotron X-ray diffraction study

Helena Van Swygenhoven, Steven Van Petegem, Patrick Schloth

The mechanical behaviour of nanocrystalline austenitic steels with and without yttria particles was investigated using in situ synchrotron diffraction during tensile deformation. Two different strain-hardening regimes were found. The first regime can be as ...

2012