Publications related to Field coil

Related publications (28)

Computational design and additive manufacturing of electromagnetic coils

The modern world is heavily reliant on electromagnetic devices to convert mechanical energy into electrical energy and vice versa. These devices are fundamental to powering our society, and the growing need for automated production lines and electrified tr ...

EPFL2023

Unveiling the Rolling to Kayak Transition in Propelling Nanorods with Cargo Trapping and Pumping

Ignacio Pagonabarraga Mora

Magnetic nanorods driven by rotating fields in water can be rapidly steered along any direction while generating strong and localized hydrodynamic flow fields. Here we show that, when raising the frequency of the rotating field, these nanopropellers underg ...

AMER CHEMICAL SOC2023

Modal engineering of electromagnetic circuits to achieve rapid settling times

Matthias Imboden

Inductive circuits and devices are ubiquitous and important design elements in many applications, such as magnetic drives, galvanometers, magnetic scanners, applying direct current (DC) magnetic fields to systems, radio frequency coils in nuclear magnetic ...

AIP Publishing2023

Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy

Particle accelerators foresee the use of Nb3Sn in the next generation of dipole magnets. A common design strategy is to grade the coil, i.e., to optimize the quantity of superconductor in the turns with respect to the magnetic field intensity. As a consequ ...

IEEE Institute of Electrical and Electronics Engineers2022

Analysis of a Novel Toroidal Configuration for Hadron Therapy Gantries

Enrico Felcini

Hadron therapy refers to a medical treatment that uses hadron beams (i.e. protons and ions) to deliver localized energy that suppresses cancerous cells, sparing the neighbouring healthy tissues from unwanted radiation. The major technical components of a h ...

EPFL2021

Macroscopic polarization in the nominally ergodic relaxor state of lead magnesium niobate

Dragan Damjanovic, Lukas Riemer, Kanghyun Chu

Macroscopic polarity and its dynamic response to external electric fields and temperature in the nominally ergodic relaxor phase of pristine lead magnesium niobate crystals and ceramics, Pb(Mg1/3Nb2/3)O3 (PMN), were investigated. Dynamic pyroelectric measu ...

AIP American Institute of Physics2020

An Instrumented High-Speed Rotor with Embedded Telemetry for The Continuous Spatial Pressure Profile Measurement in Gas Lubricated Bearings: A Proof of Concept

Jürg Alexander Schiffmann, Karim Magdi Zakaria Abdelrahman Shalash

Pressure is one of the constitutional quantities governing the flow field in gas lubricated bearings. Knowledge of the pressure is of principal importance in the fundamental understanding of such bearings and for the calibration of reduced order models. Th ...

2020

Electrical effects in winding of large electrical ac machines application to advanced large size DFIM

Frédéric Michael Maurer

To meet the electrical grid's demand on pump power variation, GE Renewable Energy develops since 10 years variable speed machines (also called Doubly Fed Induction Generators or DFIG). Within turbogenerators, the phenomenon of circulating currents in Roebe ...

EPFL2019

An Instrumented High-Speed Rotor With Embedded Telemetry For The Continuous Spatial Pressure Profile Measurement In Gas Lubricated Bearings: A Proof Of Concept

Jürg Alexander Schiffmann, Karim Magdi Zakaria Abdelrahman Shalash

Gas lubricated bearings are capable of supporting high speed rotors with satisfactory load capacities. Pressure is one of the constitutional quantities governing the flow field in gas lubricated bearings. Knowledge of the pressure is of principal importanc ...

Amer Soc Mechanical Engineers2019

Very-High-Speed Miniaturized Permanent Magnet Motors: Modeling and Experimental Validation

Yves Perriard, Guillaume Paul-André Burnand

The purpose of this paper is to present an experimental method to separate losses components due to the rotation of the rotor in very-high-speed permanent magnet machines with ball bearings. In addition, it presents and validates an analytical model for th ...

2019

Hybrid HTS-Nb3Sn-NbTi DEMO CS coil design optimized for maximum magnetic flux generation

Pierluigi Bruzzone, Rainer Wesche, Kamil Sedlák, Davide Uglietti, Xabier Sarasola Martin, Ortensia Dicuonzo

The present work is performed within the framework of the EUROfusion DEMO project. Previously, it was demonstrated that for a maintained magnetic flux the use of HTS conductors at highest magnetic field in a layer-wound CS coil would allow the reduction of ...

ELSEVIER SCIENCE SA2019

Method and Procedure in Metal Detection and Distinctive Discrimination of Size, Shape, and Location of Hidden Single and Multi-Material Targets

Chafic Abu Antoun

This work provides a procedure and methodology for the design of an electro-magnetic sensor based on induction due to ferromagnetic and pure electrically conduc-tive hidden targets. The electromagnetic sensor is made of one or several excitation coils, whi ...

EPFL2017

Scrape-Off Layer physics in limited plasmas in TCV

Federico Nespoli

Controlled nuclear fusion is the most promising candidate for being an inexhaustible, clean and intrinsically safe energy source. In the tokamak fusion reactor concept, a high temperature plasma is confined by magnetic fields. Turbulence diffuses the confi ...

EPFL2017

Contribution to the Ultra-Fast Charging of Electric Vehicles : The Configurable Modular Multilevel Converter (CMMC)

Rosa Martel Danoary Tsirinomeny

It is generally agreed that one of the drawbacks of a conventional vehicle is the inability to always reach the best operating point of the engine and the inability to regenerate the kinetic energy. Meaning, even with the help of the gearbox or automatic t ...

EPFL2016

Electrical and Magnetical Modeling of Inductive Coupled Power Transfer Systems

Christophe Bruno Auvigne

Nowadays, there is a very high number of electronic devices with different ranges of power. Desktop peripherals and cellphones are an example of widely used low power devices. Contactless power transfer is useful to supply or recharge these devices without ...

EPFL2015

Modular multilevel battery packaging for a universal and flexible EVs charging system

Rosa Martel Danoary Tsirinomeny

Electric Vehicles (EVs) carmakers are heavily confronted by the limited fault ride-through capabilities of actual EVs battery packs. Therefore, this paper introduces a new method of EVs battery packaging based on modular multilevel battery modules as well ...

2014

The new TORPEX in-vessel toroidal conductor for the generation of a poloidal magnetic field

Ambrogio Fasoli, Ivo Furno, Fabio Avino

TORoidal Plasma EXperiment (TORPEX) is a Simple Magnetized Torus featuring open helical magnetic field lines obtained from the superposition of a small vertical component on the main toroidal field. This work introduces the experimental setup developed to ...

Amer Inst Physics2014

Electromagnetic Analysis and Validation of an Ironless Inductive Position Sensor

Yves Perriard, Alessandro Danisi

The ironless inductive position sensor is a linear position sensing structure, which exhibits intrinsic immunity to external magnetic fields since it is characterized by air-cored windings. This new solution may be of major interest for applications where ...

Institute of Electrical and Electronics Engineers2013

Real-time 3D thermal modeling of a magnetically levitated planar actuator

Yves Perriard

A transient thermal model used to monitor the temperature distribution in real-time in a long-stroke moving-magnet planar actuator is presented. The temperature distribution in the stator coils of the planar actuator depends on the trajectory of the levita ...

Pergamon-Elsevier Science Ltd2013

Contribution to the Active Generator Principle : the Gate-commutated Polyphased Matrix Converter

Antoine Béguin

This work is part of the innovative "Active Generator" (AG) project. AG is a concept that suggests a new arrangement of the turbine-generator line of a high power utility (a few hundred of MW) in order to de-synchronize the rotation speed of the turbine-ge ...

EPFL2012