Concept

Brass

Related publications (28)

3-D contact and pore network analysis of MICP cemented sands

The study describes a comprehensive methodology to evaluate X-Ray micro-computed tomography data from sand samples and to characterize their 3D microstructural properties. Fine and medium-grained sands are analyzed in their natural and bio-cemented states. ...

SPRINGER2023

Persistence of variant selection in red gold alloys

Roland Logé, Cyril Cayron, Margaux Nathalie Dominique Larcher

Recently, a new thermally activated distortion with amplification (TADA) effect has been reported in red gold alloys caused by the A1 -> L1(0) phase transformation. The macroscopic amplification is due to the persistence of variant selection nucleated unde ...

ELSEVIER SCIENCE SA2022

Leibniz en Créateur. Un regard matériel sur sa machine à calculer

Simon François Dumas Primbault

Between 1671 and 1716, the German mathematician Gottfried Wilhelm Leibniz attempted to design a reckoning machine. Working closely with the Parisian clockmaker Monsieur Ollivier, Leibniz eventually failed at producing a working prototype. After the redisco ...

2022

Phase transformation induced distortions in red gold alloys

Margaux Nathalie Dominique Larcher

Red gold alloys owe their warm and attractive colour to the combination of gold and copper atoms. Thanks to their good mechanical properties and resistance to corrosion, red gold alloys are used in luxury industries as well as in dentistry. Around the equi ...

EPFL2021

Mapping Spatial Distribution of Pores in an Additively Manufactured Gold Alloy Using Neutron Microtomography

Roland Logé, Jamasp Jhabvala, Hossein Ghasemi Tabasi

A crucial criterion for the quality of the additively manufactured parts is the porosity content for achieving an acceptable final relative density. In addition, for jewelry applications, visible pores are unacceptable at or in the vicinity of the surface. ...

2021

Understanding Thermomechanical Treatments Induced by Laser Powder Bed Fusion Process

Hossein Ghasemi Tabasi

Additive Manufacturing (AM) is referred to technologies that produce directly 3D parts in a layer-by-layer fashion. Laser Powder Bed Fusion (L-PBF) is one of the most important AM processes, enabling production of very complex metallic objects from a compu ...

EPFL2021

Influence of thermo-mechanical processing on ordering kinetics in 18 karat red gold alloy

Marina Garcia Gonzalez

The aim of this project is to understand the correlation between alloy composition and the build-up of internal stresses in 18 carat Au-Ag-Cu alloys under thermo-mechanical loads. The copper rich end of this ternary system exhibits order-hardening of the e ...

EPFL2020

'Green' Cr(III)-based electrodeposition of stainless steel-like FeCrNi: synthesis, mechanisms, material properties of films and micro-nanocomponents for bio-medical applications

Enrico Bertero

The electrodeposition (ED) of stainless steel (SS) -like FeCrNi alloys for miniaturised devices is appealing for bio-medicine as it would allow combining excellent material properties (e.g. corrosion resistance, hardness, bio-compatibility) at low-cost. Ho ...

EPFL2020

Impact of in situ nanomechanics on physical metallurgy

Johann Michler, Helena Van Swygenhoven

The mechanical response of modern alloys results from a complex interplay between existing microstructure and its evolution with time under stress. To unravel these processes, in situ approaches intrinsically have a critical advantage to explore the basic ...

2019

Predicting the reflectivity and colour of metals from first principles

Gianluca Prandini

Gold and copper are the only two elemental metals that show a characteristic colour, due to the presence of a drop in the reflectivity curve inside the visible range. Reflectivities of all other metals are in general high and flat for all visible frequenci ...

EPFL2019

Electron backscatter diffraction study of variant selection during ordering phase transformation in L1(0)-type red gold alloy

Roland Logé, Cyril Cayron, Margaux Nathalie Dominique Larcher

A shape-memory effect is known to appear in red gold alloys with compositions close to Au-Cu. The aim of this paper is to study by electron backscatter diffraction (EBSD) the variant selection in the A1 -> L1(0) transformation occurring under stress, in be ...

INT UNION CRYSTALLOGRAPHY2019

Corrosion mechanisms and durability models for historical tinplate food cans

Fabio Cova Caiazzo

Since the early of the 19th century, canning is one the most efficient ways to preserve foods. Tinplated steel has been used since the beginning for this purpose and it is still one of the most used materials for cans production because it combines the goo ...

EPFL2018

Thermally-activated flow in nominally binary Al-Mg alloys

William Curtin

The temperature-dependent flow behavior in nominally binary Al-Mg alloys measured recently (Jobba etal., 2015; Niewczas et al., 2015) is interpreted in the context of a parameter-free solute strengthening model. The recent measurements show consistently hi ...

Elsevier2016

Influence of icosahedral short range order on diffusion in liquids: A study on Al-Zn-Cr alloys

Michel Rappaz, Güven Kurtuldu

It has been shown recently that minute additions of Cr in Al-Zn alloys refine the solidified grain structure and induce multiply-twinned grains which can only be explained if the icosahedral symmetry is considered (Kurtuldu et al., 2013). It has been sugge ...

Elsevier2016

Metal artefact reduction in computed tomography images by a fourth-order total variation flow

Alfio Quarteroni, Elena Faggiano

Permanent metallic implants, such as dental fillings and cardiac devices, generate streaks-like artefacts in computed tomography (CT) images. In this article, we propose a strategy to perform metal artefact reduction (MAR) that relies on the total variatio ...

Taylor & Francis Ltd2016

Multi-scale modeling of elasto-plastic response of SnAgCu lead-free solder alloys at different ageing conditions: Effect of microstructure evolution, particle size effects and interfacial failure

John Botsis, Joël Cugnoni, Milad Maleki

In microelectronics applications, SnAgCu lead-free solder joints play the important role of ensuring both the mechanical and electrical integrity of the components. In such applications, the SnAgCu joints are subjected to elevated homologous temperatures f ...

Elsevier2016

In situ X-ray Diffraction during Casting: Study of Hot Tearing in Al-Zn alloys

Jean-Marie Drezet, Güven Kurtuldu, Bastien Gilbert Pierre Mireux

During solidification of metallic alloys, coalescence corresponds to the formation of solid bridges between grains when both solid and liquid phases are percolated. As such, it represents a key transition with respect to the mechanical behaviour of solidif ...

Trans Tech Publications Switzerland2015

Enhancing the Electrochemical and Electronic Performance of CVD-Grown Graphene by Minimizing Trace Metal Impurities

Klaus Kern, Kannan Balasubramanian

The presence of unwanted impurities in graphene is known to have a significant impact on its physical and chemical properties. Similar to carbon nanotubes, any trace metals present in graphene will affect the electrocatalytic properties of the material. He ...

Wiley-V C H Verlag Gmbh2014

Prediction of Hot Tear Formation in Vertical DC Casting of Aluminum Billets Using a Granular Approach

Michel Rappaz, Jean-Marie Drezet, Meisam Sistaninia

A coupled hydromechanical granular model aimed at predicting hot tear formation and stress-strain behavior in metallic alloys during solidification is applied to the semicontinuous direct chill casting of aluminum alloy round billets. This granular model c ...

Springer2013

Effect of tool travel and rotation speeds on weld zone defects and joint strength of aluminium steel lap joints made by friction stir welding

Hossein Najafi

In this study, Al-5083 and St-12 alloy sheets were friction stir lap welded at different travel (7-23 cm min(-1)) and rotation (750-1125 rev min(-1)) speeds of the welding tool. The welded joints were characterised by various methods including shear tensil ...

2012