Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Vacuum tube

Related publications (30)

Contrasting Views of the Electric Double Layer in Electrochemical CO2 Reduction: Continuum Models vs Molecular Dynamics

Sophia Haussener, Evan Fair Johnson

In the field of electrochemical CO2 reduction, both continuum models and molecular dynamics (MD) models have been used to understand the electric double layer (EDL). MD often focuses on the region within a few nm of the electrode, while continuum models ca ...

Amer Chemical Soc2024

On-Chip Fully Reconfigurable Artificial Neural Network in 16 nm FinFET for Positron Emission Tomography

Edoardo Charbon, Claudio Bruschini, Emanuele Ripiccini, Andrada Alexandra Muntean

Smarty is a fully-reconfigurable on-chip feed-forward artificial neural network (ANN) with ten integrated time-to-digital converters (TDCs) designed in a 16 nm FinFET CMOS technology node. The integration of TDCs together with an ANN aims to reduce system ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Electrochemical sensors modified with iron oxide nanoparticles/ nanocomposites for voltammetric detection of Pb (II) in water: A review

Sandro Carrara

Permissible limits of Pb 2+ in drinking water are being reduced from 10 mu gL -1 to 5 mu gL -1 , which calls for rapid, and highly reliable detection techniques. Electrochemical sensors have garnered attention in detection of heavy metal ions in environmen ...

Cell Press2024

Composition and Element Distribution Mapping of γ′ and γ" Phases of Inconel 718 by High-Resolution Scanning Transmission Electron Microscopy and X-ray Energy-Dispersive Spectrometry

Philippe Buffat

The main strengthening mechanism for Inconel 718 (IN718), a Ni-based superalloy, is precipitation hardening by gamma ' and gamma '' particles. It is thus essential, for good alloy performance, that precipitates with the desired chemical composition have ad ...

MDPI2024

A Two-Wired High Input Impedance and High CMRR Active Electrode Insensitive to Component Mismatch

Alexandre Schmid, Mehdi Saberi

This article proposes a new two-wired amplifying active electrode (AE), presenting a high input impedance and a high common-mode rejection ratio (CMRR). In the proposed structure, the input impedance and the CMRR of the system are considerably increased by ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Frontiers in the Application of RF Vacuum Electronics

Timothy Goodman

The application of radio frequency (RF) vacuum electronics for the betterment of the human condition began soon after the invention of the first vacuum tubes in the 1920s and has not stopped since. Today, microwave vacuum devices are powering important app ...

2023

Multiscale enhancement of refrigerant falling film boiling by combining commercially enhanced tubes with nanostructures

John Richard Thome

Multiscale surface structures offer the opportunity to combine the heat transfer enhancement provided by microscale structures with the dryout benefits provided by some nanostructures, which is particularly attractive for falling film evaporators, who have ...

Pergamon-Elsevier Science Ltd2023

Feasibility of the EDICAM camera for runaway electron detection in JT-60SA disruptions

Carl Mathias Paul Hoppe

The visible camera system EDICAM (Event Detection Intelligent Camera), recently installed on JT-60SA, is simulated to assess whether it can be used for measuring synchrotron radiation from relativistic runaway electrons. In this simulation, the SOFT synthe ...

ELSEVIER SCIENCE SA2023

Gas generating membrane-less electrolyser

Demetri Psaltis, Pooria Hadikhani, Steven Alexandre Schenk, Sylvain Jacky Reinauer

Electrolyser including a reactor (2) comprising a housing (4), fluidic channels (6a, 6b, 6c) within the housing, and electrodes (16a, 16c) comprising an anode (16a) and a cathode (16c). The fluidic channels include an inter-electrode channel (6b) arranged ...

2023

Modelling of nonneutral plasmas trapped by electric and magnetic fields relevant to gyrotron electron guns

Guillaume Michel Le Bars

Gyrotrons are a class of high-power vacuum-electronics microwave sources, which are envisioned to play an important role in the domain of magnetically confined fusion plasmas. Indeed, only gyrotrons are capable of producing continuous electromagnetic waves ...

EPFL2023

Equilibrium pressure limits in stellarators

Antoine Baillod

This thesis delves into the potential of magnetic fusion energy, and in particular focuses on the stellarator concept. Stellarators use external coils to produce 3-dimensional (3D) magnetic fields that confine a thermonuclear plasma in a topologically toro ...

EPFL2023

Towards semiconducting nano-engineered photocathodes for electron microscopy applications

Nicolas Tappy

The growing field of pulsed electron microscopy (PEM) currently suffers from technical challenges, many of which are related to the inefficiency of present pulsed emitters. In this research, we explore semiconductor photoemitters as a replacement of conven ...

EPFL2023

Heat transfer of uncoated and nanostructure coated commercially micro-enhanced refrigeration tubes under pool boiling conditions

John Richard Thome

The heat transfer performance of commercially produced micro-enhanced tubes with and without a nanocoating was investigated under pool boiling of saturated refrigerant. These multiscale enhancements were on the outside of 19 mm horizontal copper tubes heat ...

Pergamon-Elsevier Science Ltd2023

Voltage-driven Chemical Reactions Enable the Synthesis of Tunable Liquid Ga – Metal Nanoparticles

Raffaella Buonsanti, Pascal Alexander Schouwink, Anna Loiudice, Valery Okatenko, Coline Marie Agathe Boulanger, Alexander Nicolas Chen, Krishna Kumar

Nanosized particles of liquid metals are emerging materials which hold promise for applications spanning from microelectronics to catalysis. Yet, the knowledge of their chemical reactivity is largely unknown. Here, we study the reactivity of liquid Ga and ...

2023

Mode-Specific Coupling of Nanoparticle-on-Mirror Cavities with Cylindrical Vector Beams

Christophe Marcel Georges Galland, Sachin Suresh Verlekar, Valeria Vento, Philippe Andreas Rölli

Nanocavities formed by ultrathin metallic gaps permitthe reproducibleengineering and enhancement of light-matter interaction, withmode volumes reaching the smallest values allowed by quantum mechanics.While the enhanced vacuum field in metallic nanogaps ha ...

2023

High-Performance CMOS SPAD-Based Sensors for Time-of-Flight PET Applications

Francesco Gramuglia

Detecting light, photon by photon, has been possible since the 1930s, with the invention of the photomultiplier tube (PMT). However, it is only since the 1970s, that solid-state single-photon detectors have emerged and only since 2003 that a new technology ...

EPFL2022

Electron Emission Regimes of Planar Nano Vacuum Emitters

Yujia Yang, Alberto Nardi

Recent advancements in nanofabrication have enabled the creation of vacuum electronic devices with nanoscale free-space gaps. These nanoelectronic devices promise the benefits of cold-field emission and transport through free space, such as high nonlineari ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

General invariance and equilibrium conditions for lattice dynamics in 1D, 2D, and 3D materials

Nicola Marzari, Samuel Poncé, Changpeng Lin

The long-wavelength behavior of vibrational modes plays a central role in carrier transport, phonon-assisted optical properties, superconductivity, and thermomechanical and thermoelectric properties of materials. Here, we present general invariance and equ ...

NATURE PORTFOLIO2022

Prediction of Dispersion Rate of Airborne Nanoparticles in a Gas-Liquid Dual-Microchannel Separated by a Porous Membrane: A Numerical Study

Carlotta Guiducci, Zohreh Sheidaei

Recently, there has been increasing attention toward inhaled nanoparticles (NPs) to develop inhalation therapies for diseases associated with the pulmonary system and investigate the toxic effects of hazardous environmental particles on human lung health. ...

MDPI2022

Prototype mitre bends of the ex-vessel waveguide system for the ITER upper launcher: Thermal hydraulic simulations and experiments with off-center mm-wave beams

Timothy Goodman, René Chavan, Anastasia Xydou, Matteo Vagnoni, Humberto Torreblanca Quiroz

On ITER, long pulse gyrotrons are required as a power source for electron cyclotron heating (ECH) and current drive (CD). The microwaves are guided from the gyrotrons, which are placed far from the Tokamak, into the plasma by transmission lines (TLs) and a ...

Elsevier2021