Albert RenkenTeaching & PhD Past EPFL PhD Students Serge Maeder, Jacques Membrez, Stéphane Porchet, Philippe Menoud, Brigitta Frank, Harvey Randall, Wolfgang Zimmerer, Frédéric Van Vyve, Serge Golay, Jianzhong Yang, Stéphane Dubuis, Philippe Warnery, Anders Nattorp, Christian Spühler, Laurent Cavin, Miriam Lorenzi, Bastien Monnerat, André Rouge, Olivier Wolfrath, Peter Stahl, Ralf Maurer, Konrad Geissler, Volker Höller, Benoît Louis, Pierre Reuse, Fabio Rainone, Eric Joannet, Chrystèle Horny Past EPFL PhD Students as co
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Thierry MeyerThierry Meyer received in 1986 a diploma degree (MSc) in chemical engineering from the Swiss Federal Institute of Technology at Lausanne (EPFL). He was awarded in 1989 a PhD at EPFL for his thesis on micromixing in highly viscous polymeric media. He joined the Institute of Chemical Engineering from 1989 till 1993 as senior scientist in the field of polymerization reactions. In 1994 he joined Ciba-Geigy SA in the pigment division as successively development chemist, head of development a.i. and finally production manager for high performance pigments. Returning to the Institute of Chemical Engineering at EPFL in Lausanne by the end of 1998, he was nominated maître denseignement et de recherche (MER) for leading a new research group in the field of polymers and supercritical fluids, and teaching to chemists, chemical engineers and material sciences, disciplines as process development, introduction to chemical engineering, polymer and organic chemistry at master and bachelor program. In 2005 he owned the responsibility of the Occupational Health and Safety of the school of basic sciences on top of his research activities dealing with risk management and supercritical fluids. He is presently teaching introduction to chemical engineering at bachelor level, risk management at master level and specific courses on safety and engineering risk management in continuing education. He acts also as consultant and expert in risk assessment and chemical engineering matters by the ICC (International Chamber of Commerce) of the World Business Organization, by several consultancy companies and by major and SMEs chemical industries. Thierry Meyer is currently member of several international associations of the European Federation of Chemical Engineering, American institution of chemical engineering, American chemical society and senior member of the American Institute of Chemical Engineers. He was elected chairman of the European Working Party on Polymer Reaction Engineering from 2001 till 2006. He his currently the Swiss academic member of the European Working Party on Loss Prevention and Safety Promotion as well as of the European Working Party on Education. He is member of several editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Sandrine GerberSandrine Gerber studied chemistry at the "Ecole Nationale Supérieure de Chimie de Paris" in France, where she obtained a diploma of chemical engineer in 1993. The same year she obtained a DEA (Master degree) of organic chemistry at the University Pierre et Marie Curie (Paris VI, France). From 1993 to 1996 she did a PhD in organic chemistry under the supervision of Prof. Jean-Pierre Genêt at the Ecole Nationale Supérieure de Chimie de Paris. In 1996, she moved to University of Lausanne for a post-doctoral stay under the supervision of Prof. Pierre Vogel. In 1998, she was appointed Maître-Assistante at the Institute of Organic Chemistry in the University of Lausanne. In 2003, she obtained the habilitation to direct research from the University Pierre et Marie Curie (Paris VI, France). The same year, she was appointed scientific adjunct at the EPFL and senior scientist (Maître d'Enseignement et de Recherche) in 2006. In December 2014, she was promoted to titular professor. Since September 2007, Sandrine Gerber is deputy to the director of the Institute of Chemical Sciences and Engineering (ISIC). She is also member of the Board of Directors of the Swiss Chemical Society. Since 2007, Sandrine Gerber is part-time lecturer at the university of Fribourg. She was awarded the Prize Eugene Schueller in 1997, the Prize Dufour for prospective organic chemistry in 2005 and the Werner Prize 2010. She also received a special mention in recognition of exceptional quality of pedagogic competencies in the teaching of basic sciences, given by the Direction of the School of Biology and Medicine from the University of Lausanne, in 2013. In October 2018, she will receive the Prize for Excellence in Teaching from the section of Chemistry and Chemical Engineering.
Paul Joseph DysonPaul Dyson joined the Institute of Chemical Sciences and Engineering at the EPFL in 2002 where he heads the Laboratory of Organometallic and Medicinal Chemistry and between 2008 and 2016 chaired the Institute. He has won several prizes including the Werner Prize of the Swiss Chemical Society in 2004, the Award for Outstanding Achievements in Bioorganometallic Chemistry in 2010, the Centennial Luigi Sacconi Medal of the Italian Chemical Society in 2011, the Bioinorganic Chemistry Award of the Royal Society of Chemistry in 2015, the European Sustainable Chemistry Award of the European Chemical Society in 2018 and the Green Chemistry Award from the Royal Society of Chemistry in 2020. He is also a Clarivate Highly Cited Researcher and has an H-index >110 (web of science and google scholar). He was elected a Fellow of the Royal Society of Chemistry in 2010, a Fellow of the European Academy of Science in 2019 and a life-long fellow of the American Association for the Advancement of Science in 2020. Over the years he has held visiting professorships at the University of Bourgogne, University of Pierre et Marie Curie, University of Vienna, University of Rome Tor Vergara, Chimie Paristech and Shangai Jiao Tong University.Since 2016 he has been Member of the Council of the Division of Mathematics, Natural and Engineering Sciences at the Swiss National Science Foundation.Between 2016-2021 he has been Member of the Council of the Division of Mathematics, Natural and Engineering Sciences at the Swiss National Science Foundation. In 2021 he was appointed Dean of the Faculty of Basic Sciences.
Benjamin Marcel Daniel RothéInterests - Ribonucleoparticles biogenesis- Regulation of mRNA translation- Protein phase separation Education PhD | Biochemistry and Molecular Biology 2007 – 2012 University of Lorraine - Nancy I - FRANCE
Florian Frédéric Vincent BreiderFlorian Breider obtained his PhD in the field of the stable isotope biogeochemistry from the University of Neuchatel in 2013. This was followed by seven months of postdoc at EPFL in the Atmospheric Particles Research Laboratory and two years as research associate at Tokyo Institute of Technology (Japan) where he conducted studies on nitrous oxide biogeochemistry in oceans. From 2015 to 2018, he was research scientist in the Laboratory for Water Quality and Treatment at EPFL where he conducted research on disinfection by-products and antibiotic resistant bacteria. Since May 2018, he is director of the Central Environmental Laboratory at the Institute of Environmental Engineering of EPFL.
Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Mission
Research at the Laboratory of Polymer (LP) focuses on the development of novel advanced polymeric materials with potential applications in optics, electronics or medicine. The philosophy is that precise control over nanoscale structure is an important prerequisite to tailor polymer properties. To this end, a “bottom-up” approach is followed, which starts with designing a new material at the molecular level, in order to be able to pr
Lucia Baldi Unser01/2021 - present Deputy to the Associate VP for Research / Deputy to the Associate VP for Centers & Platforms, EPFL06/2017 - 12/2020 Deputy to the Dean, School of Basic Sciences, Ecole Polytechnique Fédérale de Lausanne ;01/2015 - 11/2017 Lecturer/Communication and outreach manager at the School of Life Sciences, EPFL04/1998 - 03/2015: Research and Teaching Associate/Lecturer, Laboratory of Cellular Biotechnology, School of Life Sciences; 01/1994 - 07/1997: Visiting Fellow, Laboratory of Immunoregulation, NIAID, NIH, Bethesda, Maryland, USA;1991 - 1994: Research Fellow, Laboratory of Pediatric Oncology, G. Gaslini Scientific Institute, Genova, Italy;1987 - 1990: Research Fellow, Clinical Immunology and Immunogenetics Dept., Nat. Inst. for Cancer Research, Genova, Italy.
Berend SmitBerend Smit received an MSc in Chemical Engineering in 1987 and an MSc in Physics both from the Technical University in Delft (the Netherlands). He received in 1990 cum laude PhD in Chemistry from Utrecht University (the Netherlands). He was a (senior) Research Physicists at Shell Research from 1988-1997, Professor of Computational Chemistry at the University of Amsterdam (the Netherlands) 1997-2007.
In 2004 Berend Smit was elected Director of the European Center of Atomic and Molecular Computations (CECAM) Lyon France. Since 2007 he is Professor of Chemical Engineering and Chemistry at U.C. Berkeley and Faculty Chemist at Materials Sciences Division, Lawrence Berkeley National Laboratory. Since 2014 he has been director of the Energy Center at EPFL.
Yves BellouardDr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website
Shaik Mohammed ZakeeruddinTeaching & PhD Past EPFL PhD Students as codirector Magdalena Anna Marszalek, Jiyoun Seo, Marko Stojanovic, Natalie Flores Diaz, Anwar Qasem M Alanazi, Thomas Paul Baumeler, Essa Awadh R Alharbi, Masaud Hassan S Almalki
Andreas ZüttelTeaching & PhD PhD Students Boyu Ouyang, Wai Kwan Liu, Guillaume Bérenger Rod, Aleksandar Mihaylov Mikov, Rui Li, Akhil Varma Penmathsa Past EPFL PhD Students Robin Tobias Andreas Mutschler, Kun Zhao, Loris Giovanni Lombardo, Mo Li, Jie Zhang, Youngdon Ko, Cedric David Koolen, Thi Ha My Pham, Zohreh Akbari, Yasemen Kuddusi Courses Thermodynamics of energy conversion and storage ChE-414 The course is an introduction to the energy conversion. It focusseson the thermodynamics of the engines a
