Kurt EyerTeaching & PhD Courses Bioprocesses and downstream processing ChE-437 This course aims at a more advanced coverage of the basic aspects discussed in module ChE-311. It is however of a stand-alone nature, and even students who have little knowledge on - but a keen interest in - (bio)process engineering shall benefit as well from this module.
Manfred ZinnTeaching & PhD Past EPFL PhD Students as codirector Hugo André Denis Fleuriot - Blitman Courses Biochemical engineering ChE-311 This course introduces the basic principles of bioprocess engineering and highlights the similarities and differences with chemical engineering. Without going into the fundamentals, it proposes an overview of the techniques for fermentation as well as product purification (DownStream Processing) Bioprocesses and downstream processing ChE-437 This co
Ana Catarina Gouveia BrazTeaching & PhD Courses Process development ChE-459 Through a project, this course will introduce the critical steps in developing a chemical process in the context of industry decarbonisation, from the lab to industrial scale.
Simon CrelierTeaching & PhD Courses Biochemical engineering ChE-311 This course introduces the basic principles of bioprocess engineering and highlights the similarities and differences with chemical engineering. Without going into the fundamentals, it proposes an overview of the techniques for fermentation as well as product purification (DownStream Processing) Bioprocesses and downstream processing ChE-437 This course aims at a more advanced coverage of the basic aspects discussed in m
Raffaella BuonsantiTeaching & PhD PhD Students Riya Gupta, Jennifer Calderon Mora, Coline Boulanger, Moritz Tritschler, Marco Fabbiano, Seyedmohamadjavad Chabok, Hugh Andrew Warkentin Past EPFL PhD Students Chethana Janardhana Gadiyar, Seryio Saris, Valeria Mantella, Seyedehbehnaz Varandili, Pranit Srinivas Iyengar, Yannick Thomas Guntern, Jan Vávra, Laia Castilla Amorós, Valery Okatenko, Ona Segura Lecina, Ludovic Emile Frédy Zaza, Petru Pasquale Albertini Courses Introduction to chemical engineering Laboratory Works
Kumar Varoon AgrawalExpertise
Prof. Kumar Varoon Agrawal leads research at EPFL on advanced membrane materials and processes for energy-efficient molecular separations. His work focuses on atomically thin porous graphene film, and two-dimensional zeolite & metal–organic framework membranes that enable selective transport of gases and ions, with applications in carbon capture, hydrogen purification, ammonia separation, and resource recovery. By combining materials chemistry, nanofluidics, transport phenomena, atomistic simulati
Ayush AgarwalCurrent work
Developing size resolved elemental analysis methods for characterizing nano-objects in process effluents and environmental samples
Education PhD | Energy - Chemistry and Chemical Engineering 2020 – 2020 EPFL – École polytechnique fédérale de Lausanne / Paul Scherrer Institute M.Sc. | Chemical Engineering for Energy and Environment 2017 – 2019 KTH Royal Institute of Technology B.E. (Hons.) | Chemical Engineering 2011 – 2015 Birla I
Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Sangwoo KimSangwoo Kim is set to join EPFL as a Tenure Track Assistant Professor in September 2023. Prior to his appointment at EPFL, he served as a postdoctoral fellow in the Department of Mechanical Engineering at the University of California, Santa Barbara. He earned his graduate degree in Theoretical and Applied Mechanics from the University of Illinois at Urbana-Champaign, where his research delved into the relationships between statistics, geometry, and mechanical states in cellular matters. Currently, his research focus on fundamental understanding of biological and living systems, as well as the study of soft and active matter employing principles from mechanics and physics. His research interests encompass embryonic development, tissue morphogenesis, structure and mechanics of soft materials, inherent structure of amorphous materials, and non-equilibrium dynamics of active matter.
Konstantinos KarapiperisKostas Karapiperis is an Assistant Professor at EPFL directing the Data-Driven Mechanics Laboratory (LMD). His research lies at the intersection of mechanics, multiscale modeling, and data science, with applications ranging from geomaterials to structural materials. Prior to EPFL, he worked as a Postdoctoral Researcher and Lecturer at the Department of Mechanical and Process Engineering of ETH Zürich, supported by a Marie Sklodowska-Curie Fellowship. He holds a PhD in Applied Mechanics and a Minor in Applie
Athanasios NenesTeaching & PhD PhD Students Berkay Dönmez, Ernest Abboud Past EPFL PhD Students Paraskevi Georgakaki, Lucile Ricard Courses Atmospheric processes: from cloud to global scales ENV-407 The main objective is to present important atmospheric processes from the local to global scales. The course will start with cloud processes, continue to synoptic phenomena like extratropical cyclones and fronts, to finally cover numerical modeling at the regional and global scales. Introduction to environme
Diego Ruben BarrettinoDiego Barrettino (S’93–M’98–SM’06) received the Dipl.-Ing. degree in Electronic Engineering from the University of Buenos Aires, Argentina, in 1997, and the Ph.D. degree in Electrical Engineering from the Swiss Federal Institute of Technology Zurich (ETHZ) in 2004.
He worked at Allegro MicroSystems Inc., from 1997 to 2000, where he was an Analog IC Designer of Hall-effect magnetic sensors. From 2000 to 2004, he was a Ph.D. student and Research Assistant at ETHZ, where he designed chemical and mechanical sensors. In 2004, he moved to the USA where he designed biomedical devices first as a Post-Doctoral Research Associate in the University of Washington, and then as an Assistant Professor in the University of Hawaii. In 2006, he returned to Europe where he joined the Swiss Federal Institute of Technology Lausanne (EPFL) as a Senior Research Scientist for the design and development of biosensors using organic nanotransistors. From 2007 to 2009, he was a Senior Lecturer in the University of Glasgow, U.K., and in the University College Cork, Republic of Ireland, where he designed ultra-low power biomedical devices. From 2009 to 2017, he was Full Professor and Head of the Laboratory of Microelectronics, Bioelectronics and Sensor Systems (LMBS) at the University of Applied Sciences of Southern Switzerland (SUPSI), where he designed smart contact lenses and eye implants. In 2017, he joined both the Lucerne University of Applied Sciences (HSLU) and EPFL as a part-time Senior Research Scientist to continue his work on smart sensor systems.
His research interests are in the fields of physical, chemical, and biomedical microsensors; sensor fusion algorithms; analog and mixed-signal IC design; MEMS; embedded systems; avionics and bioelectronics.
Diego Barrettino is a senior member of the Institute of Electrical and Electronics Engineers (IEEE), a member of the American Institute of Aeronautics and Astronautics (AIAA) and a member of the American Association for the Advancement of Science (AAAS).
Daniel Alexander Florez OrregoExpertise
• Exergy and Energy Integration of Chemical and Industrial Processes• Cogeneration and Polygeneration, Refrigeration and Heat Pumping Systems• Technical, Economic and Environmental Analyses• Refineries, Biorefineries, Fertilizers Complexes, Hydrogen and Synthetic Fuels (SNG, DME, MeOH, FT, H2, Power-to-X)• Second law of Thermodynamics and Irreversible Thermodynamics• Combustion, Heat Transfer, Computational Fluid Dynamics, Reaction design• Modeling and Optimization of Energy Conversion Systems• Ma
Albert RenkenTeaching & PhD Past EPFL PhD Students Serge Maeder, Jacques Membrez, Stéphane Porchet, Philippe Menoud, Brigitta Frank, Harvey Randall, Wolfgang Zimmerer, Frédéric Van Vyve, Serge Golay, Jianzhong Yang, Stéphane Dubuis, Philippe Warnery, Anders Nattorp, Christian Spühler, Laurent Cavin, Miriam Lorenzi, Bastien Monnerat, André Rouge, Olivier Wolfrath, Peter Stahl, Ralf Maurer, Konrad Geissler, Volker Höller, Benoît Louis, Pierre Reuse, Fabio Rainone, Eric Joannet, Chrystèle Horny Past EPFL PhD Students as co
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Julia SchmaleExpertise
atmospheric science, aerosol-cloud interactions, climate change in polar regions
Mission
Extreme environments are particularly sensitive to climate change and are transforming at accelerated rates. This can have important global repercussions. EERL aims to create integrated process understanding by investigating interactions between the atmosphere, cryosphere, biosphere, ocean, land and anthroposphere. The goal is to characterize climate-change relevant and vertically-resolved processes that are d
Thierry MeyerThierry Meyer received in 1986 a diploma degree (MSc) in chemical engineering from the Swiss Federal Institute of Technology at Lausanne (EPFL). He was awarded in 1989 a PhD at EPFL for his thesis on micromixing in highly viscous polymeric media. He joined the Institute of Chemical Engineering from 1989 till 1993 as senior scientist in the field of polymerization reactions. In 1994 he joined Ciba-Geigy SA in the pigment division as successively development chemist, head of development a.i. and finally production manager for high performance pigments. Returning to the Institute of Chemical Engineering at EPFL in Lausanne by the end of 1998, he was nominated maître denseignement et de recherche (MER) for leading a new research group in the field of polymers and supercritical fluids, and teaching to chemists, chemical engineers and material sciences, disciplines as process development, introduction to chemical engineering, polymer and organic chemistry at master and bachelor program. In 2005 he owned the responsibility of the Occupational Health and Safety of the school of basic sciences on top of his research activities dealing with risk management and supercritical fluids. He is presently teaching introduction to chemical engineering at bachelor level, risk management at master level and specific courses on safety and engineering risk management in continuing education. He acts also as consultant and expert in risk assessment and chemical engineering matters by the ICC (International Chamber of Commerce) of the World Business Organization, by several consultancy companies and by major and SMEs chemical industries. Thierry Meyer is currently member of several international associations of the European Federation of Chemical Engineering, American institution of chemical engineering, American chemical society and senior member of the American Institute of Chemical Engineers. He was elected chairman of the European Working Party on Polymer Reaction Engineering from 2001 till 2006. He his currently the Swiss academic member of the European Working Party on Loss Prevention and Safety Promotion as well as of the European Working Party on Education. He is member of several editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Silvia CoccoloExpertise
Urban GreeningOutdoor Thermal Comfort Urban Energy Modelling
Teaching & PhD Courses Behind/Beyond future cities AR-496 We are living in an urban world and the design of sustainable cities is essential in order to decrease our energy footprint. This course provides the instruments to understand the complex urban metabolism, as well as the solutions for planning future smart and sustainable cities. Urban neighborhoods, infrastructures and sustainable development PENS-309
Jean-Louis ScartezziniDirector of EPFL Solar Energy and Building Physics Laboratory (1994-present); Founder & Director of ENAC Institute of Infrastructures, Resources and Environment (2002-2009); Founder & Director of EPFL Doctoral Program in Environment (2002-2009); Co-Director of EPFL Institute of Building Technology (1994-1997); Associate Professor of Building Physics at EPFL (1994-1997); Associate Professor of Building Physics at University of Geneva (1990-1997); Group Leader & Research Fellow at the EPFL Solar Energy Research Group (1981-1989); Research Fellow at the Applied Geophysics Institute of University of Lausanne (1980-1981).
