Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Lumped-element model

Related publications (30)

Sensitivity Analysis of the Lumped Thermal Model of the EU 170 GHz Gyrotron Magnetron Injection Gun

Jean-Philippe Hogge, Francisco Sanchez

The ITER Electron Cyclotron Resonance Heating and Current Drive (ECRH&CD) system relies on 1 MW 170 GHz Gyrotrons to provide the mm-wave power needed for plasma heating, current drive, and magneto-hydrodynamic control. The design and modeling of the contro ...

Ieee-Inst Electrical Electronics Engineers Inc2024

On the use of Cramér-Rao Lower Bound for least-variance circuit parameters identification of Li-ion cells

Mario Paolone, Vladimir Sovljanski

Electrochemical Impedance Spectroscopy (EIS) and Equivalent Circuit Models (ECMs) are widely used to characterize the impedance and estimate parameters of electrochemical systems such as batteries. We use a generic ECM with ten parameters grouped to model ...

2024

Pseudo-Three-Dimensional Analytical Model of Linear Induction Motors for High-Speed Applications

Mario Paolone, André Hodder, Simone Rametti, Lucien André Félicien Pierrejean

Literature on linear induction motors (LIMs) has proposed several approaches to model the behavior of such devices for different applications. In terms of accuracy and fidelity, field analysis-based models are the most relevant. Closed-form or numerical so ...

2024

Near-Zero Parasitic Shift Flexure Pivots Based on Coupled n-RRR Planar Parallel Mechanisms

Simon Nessim Henein, Etienne Frédéric Gabriel Thalmann, Florent Cosandier, Loïc Benoît Tissot-Daguette

Flexure pivots, which are widely used for precision mechanisms, generally have the drawback of presenting parasitic shifts accompanying their rotation. The known solutions for canceling these undesirable parasitic translations usually induce a loss in radi ...

2024

Modeling and optimization of PCB coils for inductive power transfer systems

Xiaotong Du

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Modeling and Design Optimization of Loosely Coupled PCB Spiral Coils in Inductive Power Transfer Systems

Drazen Dujic, Xiaotong Du

There are various possibilities to realize coil winding designs for an inductive power transfer system. In order to achieve high power transfer efficiency and power density and explore trade-offs between the two, design optimization around the coil link is ...

2023

A Wide-Frequency-Tuning Micro-Loop-Gap Resonator for Miniature Rubidium Vapor-Cell Atomic Frequency Standards

Anja Skrivervik, Yuanyan Su

To miniaturize the double-resonance (DR) rubidium (Rb) vapor-cell atomic clocks, a new type of micro-loop-gap microwave resonator (mu-LGR) is proposed for TE011-like mode where the magnetic field inside the cavity is homogeneous and oriented along its long ...

Institute of Electrical and Electronics Engineers2023

Numerical analysis of apparatus-induced dispersion for density-dependent solute transport in porous media

David Andrew Barry, Hong Zhang

The effects of apparatus-induced dispersion on nonuniform, density-dependent flow in a cylindrical soil column were investigated using a finite-element model. To validate the model, the results with an analytical solution and laboratory column test data we ...

2023

Thermal management for gas lubricated, high-speed turbomachinery

Jürg Alexander Schiffmann, Wei Liu, Luis Eric Olmedo Ocampo, Wanhui Liu

High-speed turbomachinery is commonly designed to achieve high power densities. Limited space for active cooling results in a challenging thermal management. A thermal modeling approach leveraging modern declarative programming capabilities is presented, y ...

2023

Intelligent RF System for Ultra Low Power Spectrum Sensing with Machine Learning

Naci Pekçokgüler

The crowdedness of the RF spectrum constitutes problems in communication, however it also accommodates large amount of useful information. This information can be used to determine existing signals and operating contexts. However, spectrum condition varies ...

EPFL2024

New Insights for Parasitic Effects of Label-Free Biosensors Based on Capacitive Micromachined Ultrasonic Transducers

Sandro Carrara, Yihe Zhao

Capacitive micromachined ultrasonic transducers (CMUTs) are regarded as an attractive candidate in bio-applications such as imaging and molecule monitoring. However, the previous researches on biochemical sensing are mostly air-coupled application based on ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Study of the enhanced electricity output of a sliding droplet-based triboelectric nanogenerator for droplet sensor design

Jürgen Brugger, Xia Liu, Wei Xu

Triboelectric nanogenerators are establishing themselves as promising candidates for realizing high-efficient energy harvesting from largely available droplets. However, the conventional droplet-based liquid-solid triboelectric nanogenerator (DLS-TENG) has ...

Elsevier2022

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

A Closed Time-Reversal Cavity for Electromagnetic Waves in Transmission Line Networks

Farhad Rachidi-Haeri, Marcos Rubinstein, Mario Paolone, Reza Razzaghi, Zhaoyang Wang

A closed time-reversal (TR) cavity has been considered a purely theoretical concept whose experimental realization was assumed to be impossible. In this article, we demonstrate that it is, in fact, possible to realize a closed TR cavity using a network of ...

2021

Energy Analysis of a Cardiac Assist Device based on Dielectric Elastomer Actuator through an Equivalent Electrical Circuit

Yves Perriard, Yoan René Cyrille Civet, Jonathan André Jean-Marie Chavanne, Francesco Clavica

Lumped parameter model and mock circulation loop are two tools commonly used in biomedical research to simulate cardiac system in order to study different assist devices. In this paper, a lumped parameter model is proposed to simulate a circulation loop. T ...

IEEE2021

Sensitivity, Noise and Resolution in a B -Modified Foundry-Made ISFET with Miniaturized Reference Electrode for Wearable Point-of-Care Applications

Mihai Adrian Ionescu, Francesco Bellando, Junrui Zhang

Ion-sensitive field-effect transistors (ISFETs) form a high sensitivity and scalable class of sensors, compatible with advanced complementary metal-oxide semiconductor (CMOS) processes. Despite many previous demonstrations about their merits as low-power i ...

2021

Prototype mitre bends of the ex-vessel waveguide system for the ITER upper launcher: Thermal hydraulic simulations and experiments with off-center mm-wave beams

Timothy Goodman, René Chavan, Anastasia Xydou, Matteo Vagnoni, Humberto Torreblanca Quiroz

On ITER, long pulse gyrotrons are required as a power source for electron cyclotron heating (ECH) and current drive (CD). The microwaves are guided from the gyrotrons, which are placed far from the Tokamak, into the plasma by transmission lines (TLs) and a ...

Elsevier2021

Elongated microstructured capacitive sensor

Véronique Michaud, Fabien Sorin, Dang Tùng Nguyen, Baris Çaglar, Chaoqun Dong, William Nicolas Duncan Esposito

The present invention concerns an elongated capacitive sensor (1) for fluid monitoring. The sensor (1) comprising: a fibre support (5) made of a dielectric material or dielectric composite material; and a first electrode (7, 9) and a second electrode (7, 9 ...

2021

Investigation on Output Capacitance Losses in Superjunction and GaN-on-Si Power Transistors

Elison de Nazareth Matioli, Armin Jafari, Mohammad Samizadeh Nikooytabalvandani, Palliyage Srilak Nirmana Perera, Halil Kerim Yildirim

Low ON-resistance of advanced superjunction (SJ) and GaN-on-Si transistors is of great importance in power converters, however, the anomalous loss in their output capacitance (C OSS ) severely limits their performance. In this work, we use an energy-orient ...

IEEE2021

Dimensional scaling of thin-film stimulation electrode systems in translational research

Stéphanie Lacour, Giuseppe Schiavone, Nicolas Vachicouras, Yashwanth Sai Reddy Vyza

Objective. Electrical stimulation of biological tissue is an established technique in research and clinical practice that uses implanted electrodes to deliver electrical pulses for a variety of therapies. Significant research currently explores new electro ...

2021