Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Tungsten

Related publications (32)

Improving the photoelectrocatalytic efficiency of CuWO4 through molybdenum for tungsten substitution and coupling with BiVO4

Kevin Sivula

A systematic investigation on the photoelectrocatalytic (PEC) performance of a series of CuW1-xMoxO4 materials with different Mo for W substitution (x = 0-0.8), successfully synthesized as single, transparent photoactive layers, allowed us to identify copp ...

Royal Soc Chemistry2024

HASPIDE: a project for the development of hydrogenated amorphous silicon radiation sensors on a flexible substrate

Giovanni De Cesare, Sylvain Dunand, Luca Massimiliano Antognini, Jonathan Emanuel Thomet

Hydrogenated amorphous silicon (a-Si:H) is a material with a very good radiation hardness and with the possibility of deposition on flexible substrates like Polyimide (PI). Exploiting these properties, the HASPIDE (Hydrogenated Amorphous Silicon PIxels DEt ...

Iop Publishing Ltd2024

A new 3MW ECRH system at 105 GHz for WEST*

Timothy Goodman, Stefano Alberti, Jean-Philippe Hogge, Ioannis Pagonakis, François Jean Gaston Legrand

The aim of the WEST experiments is to master long plasma pulses (1000s) and expose ITER-like tungsten wall to deposited heat fluxes up to 10 MW/m2. To increase the margin to reach the H-Mode and to control W-impurities in the plasma, the installation of an ...

2023

Tungsten oxide-based photoanodes: biomass valorization and the effects of oxygen vacancies

Nukorn Plainpan

Tungsten oxide-based materials have unique and intriguing properties as photoanode materials for solar energy conversion. The first part of the thesis focuses on the use of WO3 photoanodes for the oxidation of 5-(hydroxymethyl)furfural (HMF). Chapter one l ...

EPFL2023

The role of plasma-atom and molecule interactions on power & particle balance during detachment on the MAST Upgrade Super-X divertor

Christian Gabriel Theiler, Kevin Henricus Annemarie Verhaegh

This paper shows first quantitative analysis of the detachment processes in the MAST Upgrade Super-X divertor (SXD). We identify an unprecedented impact of plasma-molecular interactions involving molecular ions (likely D2+ ), resulting in strong ion sinks ...

IOP Publishing Ltd2023

Supplementary datasets for "ARBRE: Computational resource to predict pathways towards industrially important aromatic compounds"

Vassily Hatzimanikatis, Anastasia Sveshnikova, Homa Mohammadi Peyhani

Supplementary datasets accompanying the manuscript "ARBRE: Computational resource to predict pathways towards industrially important aromatic compounds" published in the Metabolic Engineering Journal (https://doi.org/10.1016/j.ymben.2022.03.013). In line w ...

Zenodo2022

Persistence of variant selection in red gold alloys

Roland Logé, Cyril Cayron, Margaux Nathalie Dominique Larcher

Recently, a new thermally activated distortion with amplification (TADA) effect has been reported in red gold alloys caused by the A1 -> L1(0) phase transformation. The macroscopic amplification is due to the persistence of variant selection nucleated unde ...

ELSEVIER SCIENCE SA2022

In situ work function measurements of W, WO3 nanostructured surfaces

Francisco Sanchez

Surface nanostructuring enables the fabrication of materials with highly desirable properties. Nanostructured tungsten surfaces have potential applications in solar water splitting. Exposing a polished tungsten surface to helium plasma induces various surf ...

ELSEVIER SCIENCE SA2022

Poisoning of Mn-Ce/AC catalysts for low-temperature NH3-SCR of NO by K+ and its counter-ions (Cl- /NO3- /SO42- )

Oliver Kröcher, Davide Ferri, Rob Jeremiah G. Nuguid

Mn-Ce/AC catalysts for low-temperature NH3-SCR of NOx were deliberately loaded with various potassium salts (KCl, KNO3, and K2SO4) to investigate the influence of the counter-ions on the poisoning impact. Whereas K salts poisoning had only marginal impact ...

ELSEVIER2022

Modelling electronic transport in monocrystalline metal oxide gas sensors: from the surface kinetics to the experimental response

Roberto Guarino, Gianluca Piccinini

Gas sensing systems and devices based on metal oxides are widely spreading due to their high performance in terms of sensor response and relatively low costs. Despite several experimental studies, as well as molecular simulations, are available in the lite ...

Elsevier2022

Solar reduction of carbon dioxide on copper-tin electrocatalysts with energy conversion efficiency near 20%

Michael Graetzel, Shaik Mohammed Zakeeruddin, Yuhang Liu, Dan Ren, Jing Gao, Jun Li, Meng Xia

Solar-driven carbon dioxide reduction has witnessed a renaissance in the past decades, but the system suffers from low reaction rates. Here the authors develop a copper/tin-oxide electrocatalyst, achieving a new benchmark solar-to-CO energy conversion effi ...

Nature Portfolio2022

Low-energy Electron Holography Microscope for Imaging of Single Molecules

Sven Alexander Szilagyi

Structure determination techniques are an essential tool to investigate and understand molecules, especially in biology, where functionality crucially depends on structure. The dominant high-resolution methods, such as transmission electron microscopy and ...

EPFL2022

Machine learning for metallurgy IV: A neural network potential for Al-Cu-Mg and Al-Cu-Mg-Zn

William Curtin, Daniel John Gilles Marchand

Most metallurgical properties, e.g., dislocation propagation, precipitate formation, can only be fully understood atomistically but most phenomena and quantities of interest cannot be measured experimentally. Accurate simulation methods are essential but f ...

2022

Phase transformation induced distortions in red gold alloys

Margaux Nathalie Dominique Larcher

Red gold alloys owe their warm and attractive colour to the combination of gold and copper atoms. Thanks to their good mechanical properties and resistance to corrosion, red gold alloys are used in luxury industries as well as in dentistry. Around the equi ...

EPFL2021

Surface Oxygenate Species on TiC Reinforce Cobalt-Catalyzed Fischer-Tropsch Synthesis

Andreas Züttel, Wen Luo

Carbide-supported metal catalysts attract extensive research interests owing to the special properties of metal carbide and the interactions between metals and the carbide supports. While surface oxide species are inevitable in carbide materials, their rol ...

AMER CHEMICAL SOC2021

Processing and micro-mechanical characterization of multi-component transition MC carbides in iron

Andreas Mortensen, Léa Deillon, Goran Zagar, Marta Fornabaio, Lionel Michelet

We prepare multi-component transition monocarbides of chosen composition by arc-melting together a pre-alloy of the transition metals and cast iron. Based on the elements Ti, Ta, V, Nb and W, 51 different binary, ternary and quaternary compositions are pro ...

2021

The thermally activated distortion with amplification effect and related variant selection in red gold alloys

Roland Logé, Cyril Cayron, Margaux Nathalie Dominique Larcher

Variant selection during the A1→L10 transformation in a polycrystalline red gold alloy close to equiatomic Au-Cu composition has been extensively studied by Electron Backscatter Diffraction (EBSD) in our previous work. The use of a mathematical description ...

2020

What EBSD and TKD Tell Us about the Crystallography of the Martensitic B2-B19′ Transformation in NiTi Shape Memory Alloys

Cyril Cayron

The complex and intricate microstructure of B19′ martensite in shape memory nickel titanium alloys is generally explained with the Phenomenological Theory of Martensitic Crystallography (PTMC). Over the last decade, we have developed an alternative approac ...

2020

Multi-physical characterization of cellular ceramics for high-temperature applications

Ehsan Rezaei

The use of cellular ceramics in enhancing the performance of a high-temperature latent heat thermal energy storage unit was investigated. A detailed design methodology is presented, which consists of a combined analytical-numerical analysis followed by a m ...

EPFL2020

Wall conditioning in fusion devices with superconducting coils

Stefano Coda

Wall conditioning is essential in tokamak and stellarator research to achieve plasma performance and reproducibility. This paper presents an overview of recent conditioning results, both from experiments in present devices and modelling, in view of devices ...

IOP PUBLISHING LTD2020