Parmenion MavrikakisExpertise
Computational electromagnetics, integral equations, finite element analysis, metasurfaces, photonics, plasmonics and microwaves.
Current Work
Developing a C++ code for the modeling of light scattering in layered media with the surface integral equation method.
I am a PhD student in the Electrical Engineering Department (EDEE) at École Polytechnique Fédérale de Lausanne (EPFL), affiliated with the Nanophotonics and Metrology Laboratory (NAM), part of the Microengineering Department (IEM) at EPFL. M
Marie Estelle Solange ViolayExpertise
-Rock mechanics-Rock physics-Fault and earthquake mechanics-Hydro-mechanical couplings
Teaching & PhD PhD Students Cindy Mikaelian, Francesco Lazari, Franco Matías Robbiano Muñoz, Karin Andrea Hofer Apostolidis, Andrea Mazzeo Past EPFL PhD Students Felipe Orellana, Mateo Acosta, Chiara Cornelio, Corentin Noël, Federica Paglialunga, Antoine Guggisberg Courses Designing Testing Machines for Geomechanics ME-700 Develop your own machines to meet your scientific needs. Learn how to bu
Claudio BruschiniClaudio Bruschini holds an MSc in high energy physics from the University of Genova and a PhD in Applied Sciences from the Vrije Universiteit Brussel (VUB). He started his career with INFN (Italy, 1993), in the WA92 CERN collaboration (particle physics), and then moved to CERN as a Fellow in the European GP-MIMD2 project, attached to the NA48 collaboration (particle physics, parallel programming, 1994-1995). He then started his close collaboration with EPFL, first in the DeTeC (Demining Technology Center) project (sensors for landmine detection/humanitarian demining, 1996-1997). After DeTeC's end, he started the first of a series of fruitful collaborations with the Vrije Universiteit Brussel (VUB) on humanitarian demining related R&D (1998). This was followed by the EUDEM survey project (The European Union in Humanitarian Demining, 1998), the EUDEM2 three year EC sponsored support measure (www.eudem.info, 2001-2004), and the DELVE support action (www.delve.vub.ac.be, 2007). In parallel he started working within the EPFL's AQUA group (Advanced Quantum Architectures, Edoardo Charbon), on topics as diverse as ultrasonic sensors for in-air application, optical 3D and high speed 2D sensing, sensor networks, or tracking/motion capture systems, in particular for the preparation of research projects. This culminated in the European MEGAFRAME (www.megaframe.eu, FP6, 2006-2010, SPAD arrays and related in-pixel time stamping electronics in deep submicron CMOS technology) and SPADnet (www.spadnet.eu, FP7, 2010-2014, networked SPAD arrays for Positron Emission Tomography) projects, coordinated by EPFL-AQUA. As from 2009 he also worked with Dario Floreano on the management of the CURVACE Curved Artificial Compound Eyes FP7 project (www.curvace.org), coordinated by EPFL-LIS. He was also active with CHUV (Lausanne University Hospital) within EndoTOFPET-US (endoscopic PET) as well as on a CTI project devoted to the development of a new hand-held standalone tool for tracer-guided medical procedures. In 2014 he had also the pleasure of joining the EPFL ICLAB of Christian Enz during its ramp-up phase, collaborating on device related topics (SNF GigaRadMOST) and biomedical R&D (NanoTera WiseSkin). Claudio is now fully with EPFL’s Advanced Quantum Architecture (AQUA). He has also been active as independent scientific consultant, under the label CBR Scientific Consulting, on the preparation of (European) R&D project proposals and the execution of individual studies, and worked in 2006 for a local start-up as operations manager and R&D advisor.... but this is another story. An unauthorized early biography is available at http://lami.epfl.ch/team/claudiob/... Tobias KippenbergTobias J. Kippenberg is Full Professor of Physics at EPFL and leads the Laboratory of Photonics and Quantum Measurement. He obtained his BA at the RWTH Aachen, and MA and PhD at the California Institute of Technology (Caltech in Pasadena, USA). From 2005- 2009 he lead an Independent Research Group at the MPI of Quantum Optics, and is at EPFL since. His research interest are the Science and Applications of ultra high Q microcavities; in particular with his research group he discovered chip-scale Kerr frequency comb generation (Nature 2007, Science 2011) and observed radiation pressure backaction effects in microresonators that now developed into the field of cavity optomechanics (Science 2008). Tobias Kippenberg is alumni of the “Studienstiftung des Deutschen Volkes”. For his invention of “chip-scale frequency combs” he received he Helmholtz Price for Metrology (2009) and the EFTF Young Investigator Award (2010). For his research on cavity optomechanics, he received the EPS Fresnel Prize (2009). In addition he is recipient of the ICO Prize in Optics (2014), the Swiss National Latsis award (2015), the German Wilhelm Klung Award (2015) and ZEISS Research Award (2018). He is fellow of the APS and OSA, and listed since 2014 in the Thomas Reuters highlycited.com in the domain of Physics. EDUCATION 2009: Habilitation (Venia Legendi) in Physics, Ludwig-Maximilians-Universität München 2004: PhD, California Institute of Technology (Advisor Professor Kerry Vahala) 2000: Master of Science (Applied Physics), California Institute of Technology 1998: BA in Physics, Technical University of Aachen (RWTH), Germany 1998: BA in Electrical Engineering, Technical University of Aachen (RWTH), Germany ACADEMIC POSITIONS 2013 - present: Full Professor EPFL 2010 - 2012: Associate Professor EPFL 2008 - 2010: Tenure Track Assistant Professor, Ecole Polytechnique Federale de Lausanne 2007 - present: Marie Curie Excellent Grant Team Leader, Max Planck Institute of Quantum Optics (Division of Prof.T.W. Hänsch) 2005 - present: Leader of an Independent Junior Research Group, Max Planck Institute 2005- present: Habilitant (Prof. Hänsch) Ludwig-Maximilians-Universität (LMU) 2005-2006: Postdoctoral Scholar, Center for the Physics of Information, California Institute of Technology 2000-2004: Graduate Research Assistant, California Institute of Technology PRIZES AND HONORS: ZEISS Research Award 2018 Fellow of the APS 2016 Klung-Wilhelmy Prize 2015 Swiss Latsis Prize 2014 Selected Thomson Reuters Highly Cited Researcher in Physics, 2014/2015 ICO Prize, 2013 EFTF Young Scientist Award (for "invention of microresonator based frequency combs") 2010 Fresnel Prize of the European Physical Society (for contributions to Optomechanics) 2009 Helmholtz Prize for Metrology (for invention of the monolithic frequency comb) 2009 1st Prize winner of the EU Contest for Young Scientists, Helsinki, Finland. Sept. 1996 Jugend forscht 1st Physics Prize at the German National Science Contest May 1996 FELLOWSHIPS Fellow of the German National Merit Foundation ("Studienstiftung des Deutschen Volkes") 1998-2002 Member of the Daimler-Chysler-Fellowship-Organization 1998-2002 Dr. Ulderup Fellowship 1999-2000 RESEARCH INTERESTS Experimental and theoretical research in photonics, notably high Q optical microcavities and their use in cavity quantum optomechanics and frequency metrology PUBLICATIONS AND OFTEN CITED METRICS*: >70 Publications in peer reviewed journals Researcher Google Profile: http://scholar.google.ch/citations?user=PRCbG2kAAAAJ&hl=en h-Index 54 (Google scholar H: 64, >25,000 citations) Thomson Reuters/Claravite List of Highly Cited Researchers (2014,2015,2016,2017) careful in its use: https://www.aps.org/publications/apsnews/201411/backpage.cfm KEY PUBLICATIONS AND REVIEWS: A. Ghadimi, et al. Elastic strain engineering for ultra high Q nanomechanical oscillators Science, (2018) Trocha, et al. Ultrafast distance measurements using soliton microresonator frequency combs Science, Vol. 359 (2018) [joint work with C. Koos] Pablo-Marin et al. Microresonator-based solitons for massively parallel coherent optical communications Nature (2017) [joint work with C. Koos] V. Brasch, et al. Photonic chip-based optical frequency comb using soliton Cherenkov radiation. Science, vol. 351, num. 6271 (2015) Aspelmeyer, M., Kippenberg, T. J. & Marquardt, F. Cavity optomechanics. Reviews of Modern Physics 86, 1391-1452, (2014) Wilson, D. J. et al. Measurement and control of a mechanical oscillator at its thermal decoherence rate. Nature (2014). Verhagen, E., Deleglise, S., Weis, S., Schliesser, A. & Kippenberg, T. J. Quantum-coherent coupling of a mechanical oscillator to an optical cavity mode. Nature 482, 63-67 (2012). Kippenberg, T. J., Holzwarth, R. & Diddams, S. A. Microresonator-based optical frequency combs. Science 332, 555-559, (2011). Weis, S. et al. Optomechanically induced transparency. Science 330, 1520-1523 (2010). Kippenberg, T. J. & Vahala, K. J. Cavity optomechanics: back-action at the mesoscale. Science 321, 1172-1176, (2008). Del'Haye, P. et al. Optical frequency comb generation from a monolithic microresonator. Nature (2007) Schliesser, A., DelHaye, P., Nooshi, N., Vahala, K. & Kippenberg, T. Radiation Pressure Cooling of a Micromechanical Oscillator Using Dynamical Backaction. Physical Review Letters 97, (2006). Jean-Paul Richard KneibExpertise
Cosmology, Gravitational Lensing, Redshift Survey, First Galaxies, Cluster of Galaxies, Fiber-positioner robotic system, Radio Astronomy, Space Sustainibility
Current work
- Former Principal investigator of the SDSS-IV eBOSS project. This is an international project assembling more than 150 participants located mainly in Europe, USA and China. This project will observe 1.5 million galaxy and quasars over 2014-2020 to accurately measure the expansion history of the Universe. * Member of the DESI co
Mohamed BouriDr. Mohamed Bouri is a group leader of Rehabilitation and Assistive Robotics in LSRO and lecturer of Robotics and Industrial Robotics. He graduated in Electrical Engineering in 1992 and obtained his PhD degree in 1997 in Industrial Automation at INSA LYON, France. Since 1997, he is at EPFL and is mainly active in the field of robot control, automation and robot design for medical and industrial applications. He is the head of Rehabilitation and Assistive Robotics group since 2005 and has strong references with the development of robotic devices for lower limb rehabilitation : The MotionMaker and WalkTrainer commercialzed by the company Swortec. His ongoing research currently focuses on the development of exoskeletons and the associated control strategies. His main current projects are TWIICE, a lower limb exoskeleton for people with paraplegia, AUTONOMYO, a walk assistance exoskeleton for people with muscle weakness, and the HiBSO, a hip orthosis for elderly.
Volker GassAfter completing his master’s degree in Microtechnology at the Federal Institute of Technology in Lausanne in 1989 he worked as a Project Manager at Mecanex SA, a Swiss High-Tech company active in the field of Aerospace Mechanisms. While working at Mecanex he completed a PhD in Science in the field of applied Micro-Systems Technologies at the University of Neuchâtel, Switzerland in 1994. In 1995, Volker Gass participated in the Management Buy Out of Mecanex SA. In 2000, Mecanex was acquired by the Swiss Defence and Technology group RUAG . He was appointed to lead Customer Relations and Business Development of the newly formed Systems & Space Division at RUAG Aerospace in 2004. In the same year he was appointed member of the Swiss Academy of Engineering Sciences for his contribution in the field of High-Technology Space applications. From November 2006 to June 2007, Volker Gass successfully graduated RUAG’s Top Leadership Course, and held the position of General Manager, Sales & Marketing in the Space Division of RUAG in Switzerland as well as Member of the Board of Directors (President) of Mecanex USA Inc., Berlin, CT, until December 2009.In 2008 he successfully led the acquisition of SAAB Space and its subsidiary Austrian Aerospace. From January to June 2009 Volker Gass led the business team in the successful acquisition of Oerlikon Space. From mid-2009 to September 2011 he was responsible for Special Projects in the Marketing & Sales Organization of RUAG Space Switzerland. Since October 2011, Dr. Volker Gass is nominated Director of the Swiss Space Center at the Ecole Politechnique Fédérale de Lausanne. In March 2012, he is awarded the title of Adjunct Professor at the School of Engineering (STI) of the EPFL. From January 2014 to December 2017, he was nominated member of ESA’s Human Spaceflight and Exploration Science Advisory Committee (HESAC) and from spring 2015 to December 2018, observer at ESA’s Earth Science Advisory Committee (ESAC).As of January 1, 2021, The Swiss Space Center is renamed "Space Innovation"
Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Giovanni De CesareExpertise
Numerical simulation and physical modeling of hydraulic works and schemes; reservoir sedimentation and turbidity currents; reservoir sediment management; Ultrasonic Doppler flow measurement; river training work and restoration; soil bioengineering and nature based solutions; fluvial eco-morphology; rapid transients in pressurized waterways; technology transfer, commissioned studies and expert reports in applied hydraulics, hydraulic constructions and infrastructures; organization of continuous edu
Martin Peter BieriMission
PhD student and research assistant
Martin Bieri is a PhD student at the Laboratory of Hydraulic Constructions (LCH) of the Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland. He obtained his Master’s degree in Civil Engineering at the same university in 2007. During his graduation he worked as trainee for different engineering companies in Switzerland. Beside his PhD topic in the field of hydrological-hydraulic modeling, he is involved in different applied research projects, physical model
Edoardo CharbonEdoardo Charbon (SM’00 F’17) received the Elektrotechnik Diploma from ETH Zurich, the M.S. from the University of California at San Diego, and the Ph.D. from the University of California at Berkeley in 1988, 1991, and 1995, respectively, all in electrical engineering and EECS. He has consulted with numerous organizations, including Bosch, X-Fab, Texas Instruments, Maxim, Sony, Agilent, and the Carlyle Group. He was with Cadence Design Systems from 1995 to 2000, where he was the architect of the company's initiative on information hiding for intellectual property protection. In 2000, he joined Canesta Inc., as the Chief Architect, where he led the development of wireless 3-D CMOS image sensors. Since 2002 he has been a member of the faculty of EPFL, where is a full professor since 2015. From 2008 to 2016 he was full professor and chair at the Delft University of Technology, where he spearheaded the university's effort on cryogenic electronics for quantum computing as part of QuTech. He has been the driving force behind the creation of deep-submicron CMOS SPAD technology, which is mass-produced since 2015 and is present in smartphones, telemeters, proximity sensors, and medical diagnostics tools. His interests span from 3-D vision, LiDAR, FLIM, FCS, NIROT to super-resolution microscopy, time-resolved Raman spectroscopy, and cryo-CMOS circuits and systems for quantum computing. He has authored or co-authored over 400 papers and two books, and he holds 23 patents. Dr. Charbon is a distinguished visiting scholar of the W. M. Keck Institute for Space at Caltech, a fellow of the Kavli Institute of Nanoscience Delft, a distinguished lecturer of the IEEE Photonics Society, and a fellow of the IEEE.
