Berend SmitBerend Smit received an MSc in Chemical Engineering in 1987 and an MSc in Physics both from the Technical University in Delft (the Netherlands). He received in 1990 cum laude PhD in Chemistry from Utrecht University (the Netherlands). He was a (senior) Research Physicists at Shell Research from 1988-1997, Professor of Computational Chemistry at the University of Amsterdam (the Netherlands) 1997-2007.
In 2004 Berend Smit was elected Director of the European Center of Atomic and Molecular Computations (CECAM) Lyon France. Since 2007 he is Professor of Chemical Engineering and Chemistry at U.C. Berkeley and Faculty Chemist at Materials Sciences Division, Lawrence Berkeley National Laboratory. Since 2014 he has been director of the Energy Center at EPFL.
Marc VielleMarc Vielle has obtained a PhD degree in economics from the University Panthéon-Sorbonne (Paris). He worked as an economic researcher at the Laboratoire ERASME of Ecole Centrale de Paris and Université de Paris I (1987-1992), where he developed and managed the macroeconomic model HERMES-France. In 1991 he joined the Commissariat à lEnergie Atomique (CEA) as senior economist where he participated to the development of two models (GEM-E3 and PRIMES) funded by the European Commission. In 1996 he joined the Institut dEconomie Industrielle of Toulouse directed by Jean-Jacques Laffont. In 2003 he joined the Laboratoire dEconomie des Ressources Naturelles directed by Michel Moreaux. Since 2007, Marc works at EPFL.
He is member of the GEMINI-E3 team and participates to the development of the world general equilibrium model GEMINI-E3. Marc has a strong experience in economic modeling (especially CGE modeling), quantitative analysis, energy and climate change policies. He has contributed to several research projects funded by national governments, European Commission and private companies.
Skype 'Skype Me!' buttonhttp://www.skype.com/go/skypebuttons Dimitrios TerzisDimitrios Terzis received his Civil Engineering diploma from the Aristotle University of Thessaloniki, Greece in 2014, having spent a year in the ESTP, Paris as an exchange student. In 2017, he graduated with a doctoral degree (PhD) in Mechanics from the Swiss Federal Institute of Technology, Lausanne (EPFL). His research, funded by the Swiss National Science Foundation (grant 200021_140246) and a scholarship of Academic Excellence of the Swiss Federal Government (No. 2014.0276), focused on the crystallisation of calcium carbonate in soils. With his thesis, Dimitrios contributed in the fields of advanced material characterisation through microscopy and X-Ray tomography techniques, predictive modelling and full-scale geotechnical applications. He’s the co-inventor of three EPFL patents and the author of more than 10 peer-reviewed publications with an h-index of 6 (Scopus, as of 08/2020). He is the recipient of grants and awards which sum up to over CHF 1 Mn, among which an EPFL Innogrant Fellowship (2018), a Swiss National Science foundation BRIDGE grant (2019) and an Innobooster grant from the Gebert rüf Stiftung. Since 2019 he is the principal lecturer and responsible for the course Innovation for construction and the environment which is part of EPFL's Master's program in Civil Engineering.
Stefano CodaTeaching & PhD PhD Students Vincent Masson, Luigi Persico, Ewout Koen L. Devlaminck, Martino Bonisolli, Alessandro Balestri, Mackenzie Peter-Fulford Van Rossem, James Winston Irawati Tumbokon, Salomon Guinchard, Inès Vergara, Michele Bottino Past EPFL PhD Students Alessandro Marinoni, Silvano Gnesin, Cornelis Adrianus de Meijere, Josef Kamleitner, Zhouji Huang, Himank Anand, Pedro Andres Molina Cabrera, Dahye Choi, Federico Pesamosca, Aylwin Iantchenko, Jean Arthur Cazabonne
Véronique MichaudBackground:
1994 Habilitation à diriger des recherches ( INPG, France)
1991 PhD in Materials Engineering ( MIT, USA)
1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France)
Activities:
Since January 2018: Associate Dean of Engineering, in charge of Education
June 2012-Dec.2017: Head of the Materials Science and Engineering Section
Since April 2017: Associate Professor at EPFL
2009-2017 : Professeur Titulaire at EPFL
1997-2009: Researcher at EPFL
1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France)
1991-1994 : Post-doctoral research associate, MIT (USA)
Author of about 300 publications of which 140 in peer-reviewed journals
Andreas PautzTeaching & PhD PhD Students Sofia Portolan, Michel Saliba, Bishal Torrente, Alexis Paul Boris Claude Dupont-Bembinoff, Cynthia Camila Güttlein Past EPFL PhD Students Ting Zhu, Vladimir Vladimirov Brankov, Boris Aviv Hombourger, Damar Canggih Wicaksono, Petra Mala, Adolfo Rais, Valentyn Bykov, Daniel Jerôme Siefman, Evgeny Nikitin, Dionysios Chionis, Oskari Ville Pakari, Friederike Bostelmann, Jiani Gao, Efstathios Vlassopoulos, Alessandro Scolaro, Stefan Radman, Alexander Aures, Lubomír Bures, Ahmed Salah
Oskari Ville PakariEducation PhD | Physics 2016 – 2020 EPFL MSc | Nuclear Engineering 2014 – 2016 ETHZ BSc | Physics 2011 – 2014 KIT
Teaching & PhD PhD Students Michel Saliba Courses Radiation and reactor experiments PHYS-451 The reactor experiments course aims to introduce the students to radiation detection techniques and nuclear reactor experiments. The core of the course is the unique opportunity to conduct reactor experiments with the EPFL react
Vincent Pierre LamirandAfter a PhD on the measurement of (p,n) reactions cross sections on small accelerators (IRSN, France), I have worked on the development of neutron detectors and measurement methods for reactor physics (CEA, France). I am part of the LRS staff since October 2014.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
