Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Charpy impact test

Related publications (26)

Optimization of composition and structure of cemented carbide cutting tools

Samy Adjam

WC-Co cemented carbides are composites, which combine a hard phase consisting of WC grains and a metallic ductile phase as a binder. Their excellent mechanical properties, combining high hardness, toughness and refractory properties, make them excellent ma ...

EPFL2021

A New Evaluation Criterion for Optimizing the Mechanical Properties of Toughened Polypropylene/Silica Nanocomposites

Hossein Pourrahmani

This study aims to experiment with the mechanical properties of polypropylene (PP)/thermoplastic elastomer/nano-silica/compatibilizer nanocomposite using the melt mixing method. The addition of polyolefin elastomers has proved to be an approachable solutio ...

SPRINGER2020

Intrinsic fracture behavior of Mg-Y alloys

William Curtin, Eleanor Yi Kei Mak

Pure magnesium (Mg) is an attractive metal for structural applications due to its low density, but also has low ductility and low fracture toughness. Dilute alloying of Mg with rare earth elements in small amounts improves the ductility, but the effects of ...

2020

Statistical Fatigue Investigation and Failure Prediction of a Healable Composite System

Véronique Michaud, Amaël Maximilien Cohades, Nathan Klaus Hostettler

Fiber reinforced polymers are massively used as an alternative to metals in structural applications. The brittle nature of their matrix, however, makes them more susceptible to crack formation and propagation resulting in costly repair operations and incre ...

2020

A new data set of granitic rock strength values from Yosemite Valley, California: applications to rock fall assessment

To explore connections between rock strength and rock falls, we undertook a comprehensive rock mechanics testing program for six granitic rock types in Yosemite Valley (California, USA) where rock falls are a common geomorphic and sometimes hazardous proce ...

2020

Design optimization of a CFRP-aluminum joint for a bioengineering application

John Botsis, Georgios Pappas

Lightweight design demands and complexity requirements of modern high-end structures in aerospace, automotive, sports and bioengineering can be successfully covered by a combination of fiber reinforced polymers (FRPs) with metallic components. Conventional ...

2019

Electrospun nanofibrous interleaves for improved low velocity impact resistance of glass fibre reinforced composite laminates

Véronique Michaud, Amaël Maximilien Cohades

This study analyses the damage tolerance of nanofibre interleaved composites when subjected to low velocity impact. Cross-ply glass/epoxy composite laminates are produced. Drop-weight impact and residual compressive strength measurements are performed on t ...

2018

The relationship between low-temperature toughness and secondary crack in low-carbon bainitic weld metals

Roland Logé, Cyril Cayron

This paper aims to reveal the relationship among low-temperature toughness, microstructure and secondary crack from both microstructural and crystallographic perspectives. Instrumented Charpy tests were carried out in the upper platform, transition tempera ...

2018

Numerical simulation of two-dimensional crack propagation

Thomas Keller, Anastasios Vassilopoulos, Aida Cameselle Molares

A numerical investigation was carried out to simulate the experimental results previously obtained concerning two-dimensional in-plane crack propagation in laminated glass fiber-reinforced polymer (GFRP) plates. The plates were designed with an embedded ci ...

2018

A probabilistic approach for assessing discontinuities in structural steel components based on Charpy-V-notch tests

Dimitrios Lignos

Available acceptance and rejection criteria for discontinuities in steel components of a welded assembly focus only on a minimum limit for the steel fracture toughness and a maximum limit for the size of the discontinuity. However, other critical parameter ...

Elsevier2017

Unraveling Brittle-Fracture Statistics from Intermittent Patterns Formed During Femtosecond Laser Exposure

Yves Bellouard, Max-Olivier Hongler, Christos Edouardos Athanasiou

Femtosecond-laser-written patterns at the surface of brittle materials may show at random times spontaneous alternations from regular to disordered structures and vice versa. Here, we show that these random transitions carry relevant statistical informatio ...

American Physical Society (APS)2017

Ductility of adhesively bonded timber joints

Thomas Keller, Anastasios Vassilopoulos, Myrsini Angelidi

In the field of timber engineering, adhesive bonding remains a promising, though poorly developed, joining technique that may increase the structural stiffness and capacity of timber joints and structures. Selecting ductile adhesives may further allow to c ...

WIT Press2017

Interplay between Process Zone and Material Heterogeneities for Dynamic Cracks

Jean-François Molinari, Fabian Barras

Using an elastodynamic boundary integral formulation coupled with a cohesive model, we study the problem of a dynamic rupture front propagating along an heterogeneous plane. We show that small-scale heterogeneities facilitate the supershear transition of a ...

American Physical Society2017

On measuring fracture toughness under load control in the presence of slow crack growth

Andreas Mortensen, Martin Guillermo Mueller, Václav Pejchal, Goran Zagar, Aparna Singh

The influence of slow crack growth in ceramics on the measurement of their fracture toughness under steadily increasing controlled load (as is generally practiced in microscale testing) is analyzed to identify conditions under which the phenomenon can caus ...

Elsevier2015

Shear failures in reinforced concrete members without transverse reinforcement: An analysis of the critical shear crack development on the basis of test results

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Cavagnis

Shear in concrete members without transverse reinforcement can be carried by various potential sheartransfer actions, whose activation depends much on the actual cracking pattern and kinematics at failure. Failures can occur in a progressive manner (at the ...

Engineering structures2015

Influence of internal impacts between fragments in dynamic brittle tensile fragmentation

Jean-François Molinari, Marco Vocialta

Dynamic fragmentation phenomena involve two important mechanisms: atomic debonding and internal impacts among formed fragments. While the former, i.e. energy dissipation due to crack propagation, has been frequently studied both theoretically and numerical ...

Elsevier2015

Fracture toughness testing of nanocrystalline alumina and fused quartz using chevron-notched microbeams

Andreas Mortensen, Marco Cantoni, Martin Guillermo Mueller, Goran Zagar, Václav Pejchal

We show that chevron-notched samples offer an attractive approach to the measurement of fracture toughness in micron-scale samples of brittle materials and use the method to characterize quartz and nanocrystalline alumina. Focused ion beam milling is used ...

Elsevier2015

Microstructure examination of Fe-14Cr ODS ferritic steels produced through different processing routes

Nadine Baluc

Various thermo-mechanical treatments were applied to refine and homogenise grain size and improve mechanical properties of hot-isostatically pressed (HIP) 14%Cr ODS ferritic steel. The grain size was reduced, improving mechanical properties, tensile streng ...

Elsevier Science Bv2014

Exploratory experimental investigations on post-tensioned structural glass beams

Pieter Christian Louter

This paper discusses two projects on post-tensioned glass beams, performed at EPFL and DTU, respectively. In these projects small scale glass beams (length of 1.5m and 1m) are post-tensioned by means of steel threaded rods tensioned at the beam ends. The p ...

Taylor & Francis Group2013

Microstructure and mechanical properties of a W-2wt.%Y2O3 composite produced by sintering and hot forging

Nadine Baluc, Philippe Spätig, Robin Schäublin

A W-2Y(2)O(3) composite has been developed by powder metallurgy methods in collaboration with the Plansee Company (Austria). The microstructure of the composite was analyzed using transmission electron microscopy and electron backscatter diffraction in sca ...

2013