Concept

History of the metre

The history of the metre starts with the Scientific Revolution that is considered to have begun with Nicolaus Copernicus's publication of De revolutionibus orbium coelestium in 1543. Increasingly accurate measurements were required, and scientists looked for measures that were universal and could be based on natural phenomena rather than royal decree or physical prototypes. Rather than the various complex systems of subdivision then in use, they also preferred a decimal system to ease their calculations. With the French Revolution (1789) came a desire to replace many features of the Ancien Régime, including the traditional units of measure. As a base unit of length, many scientists had favoured the seconds pendulum (a pendulum with a half-period of one second) one century earlier, but this was rejected as it had been discovered that this length varied from place to place with local gravity. A new unit of length, the metre was introduced – defined as one ten-millionth of the shortest distance from the North Pole to the equator passing through Paris, assuming an Earth flattening of 1/334. For practical purposes however, the standard metre was made available in the form of a platinum bar held in Paris. This in turn was replaced in 1889 at the initiative of the International Geodetic Association by thirty platinum-iridium bars kept across the globe. The comparison of the new prototypes of the metre with each other and with the Committee metre (French: Mètre des Archives) involved the development of specialized measuring equipment and the definition of a reproducible temperature scale. Progress in science finally allowed the definition of the metre to be dematerialized; thus in 1960 a new definition based on a specific number of wavelengths of light from a specific transition in krypton-86 allowed the standard to be universally available by measurement. In 1983 this was updated to a length defined in terms of the speed of light; this definition was reworded in 2019: The metre, symbol m, is the SI unit of length.

Official source

https://en.wikipedia.org/wiki/History_of_the_metre

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related courses (1)

CS-455: Topics in theoretical computer science

The students gain an in-depth knowledge of several current and emerging areas of theoretical computer science. The course familiarizes them with advanced techniques, and develops an understanding of fundamental questions that underlie some of the key probl ...

Related lectures (15)

Sparsest Cut: Leighton-Rao Algorithm

Covers the Leighton-Rao algorithm for finding the sparsest cut in a graph, focusing on its steps and theoretical foundations.

Reciprocal Trigonometric Functions

Explores reciprocal trigonometric functions, injectivity, surjectivity, unique angle determination, and infinite intervals.

Numerical Integration: Order and Convergence

Explores numerical integration order and convergence for accuracy in numerical methods.

Related publications (13)

Distributed Sensing in Gas-filled Optical Fibres

This study advances distributed sensing with optical fibres by proposing gas-mediated platforms that overcome two long-standing limitations of silica-based methods: the unavoidable cross-sensitivity between temperature and strain, and the loss of reliable temperature sensitivity at low temperatures. Three studies based on distributed sensing in gases are developed and experimentally validated. First, a threshold-temperature alarm is realised by filling a side air-hole optical fibre with carbon dioxide and i

EPFL2026

A novel methodology for bridging the gap between laboratory and field scales in geological CO2 storage

Lyesse Laloui

A novel metre-scale testing concept for studying geological carbon dioxide (CO2) storage (GCS) is presented, targeting a better understanding of the interplay between the different multi-physical processes and the time scales they occur. Unlike existing laboratory- and field-scale data, the proposed intermediate scale targets high-resolution measurements while accounting for spatial distribution. A metre-scale experimental setup is designed to reproduce stress and pressure conditions similar to the field. S

Emerald2026

The Spatial Diffusion of Internal Migration Across the Rural-Urban Continuum in Developing Countries

Urbanization constitutes the most important transformation in the population geography of developing countries but evidence on the underlying spatial patterns of internal migration is limited. We investigate in an internationally comparative perspective whether out-migration diffuses over the course of urbanization from larger and denser populated settlements to smaller and sparser ones, and whether migrants head to increasingly smaller urban destinations, as conjectured by the mobility transition hypothesi

Springer Science and Business Media LLC2026

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Official source

https://en.wikipedia.org/wiki/History_of_the_metre

About this result

Related courses (1)

CS-455: Topics in theoretical computer science

Related lectures (15)

Sparsest Cut: Leighton-Rao Algorithm

Covers the Leighton-Rao algorithm for finding the sparsest cut in a graph, focusing on its steps and theoretical foundations.

Reciprocal Trigonometric Functions

Explores reciprocal trigonometric functions, injectivity, surjectivity, unique angle determination, and infinite intervals.

Numerical Integration: Order and Convergence

Explores numerical integration order and convergence for accuracy in numerical methods.

Related publications (13)

Distributed Sensing in Gas-filled Optical Fibres

EPFL2026

A novel methodology for bridging the gap between laboratory and field scales in geological CO2 storage

Lyesse Laloui

Emerald2026

The Spatial Diffusion of Internal Migration Across the Rural-Urban Continuum in Developing Countries

Springer Science and Business Media LLC2026

Related people (6)

Valentin Simeonov

ResearchComplete publication list Valentin SimeonovCollaborateur scientifique- EPFL ENAC EFLUMList of publicationsRefereed 1. V. Mitev, V. Simeonov, and I. Grigorov, "Model experiment in measuring the temperature and concentration of water vapours in air by spontaneous Raman scattering", Bulg. J. Phys. 9, No 5, pp. 549-558, (1982)2. V. Mitev, V. Simeonov, and I. Grigorov, ”Atmospheric gases temperature measurements by pure rotational Raman scattering”, Russian Journal of Applied Spectroscopy, 39,

Mohamed Farhat

M. Farhat was born in Casablanca in 1962 (Moroccan citizen). He graduated at Ecole Nationale Supérieure d'Hydraulique et de Mécanique de Grenoble (France. He joined The LMH laboratory in 1986 as research assistant. He completed in 1994 a Ph.D. thesis on Cavitation. He joined the R&D department of Hydro-Quebec in Montréal (Canada) in 1995 where he was in charge of several research projects in the areas of production and transportation of hydropower and mainly the monitoring of large hydro turbines. Since 2001, he is senior scientist at the LMH laboratory, head of the cavitation group. He is also lecturer in Master and Doctoral programs. He is member of the Doctoral Committee in Mechanics.

Mario Paolone

Mario Paolone received the M.Sc. (with honors) and the Ph.D. degree in electrical engineering from the University of Bologna, Italy, in 1998 and 2002, respectively. In 2005, he was appointed assistant professor in power systems at the University of Bologna where he was with the Power Systems laboratory until 2011. In 2010, he received the Associate Professor eligibility from the Politecnico di Milano, Italy. Since 2011 he joined the Swiss Federal Institute of Technology, Lausanne, Switzerland, where he is now Full Professor, Chair of the Distributed Electrical Systems laboratory and Head of the Swiss Competence Center for Energy Research (SCCER) FURIES (Future Swiss Electrical infrastructure). He was co-chairperson of the technical programme committees of the 9th edition of the International Conference of Power Systems Transients (IPST 2009) and of the 2016 Power Systems Computation Conference (PSCC 2016). He was chair of the technical programme committee of the 2018 Power Systems Computation Conference (PSCC 2018). In 2013, he was the recipient of the IEEE EMC Society Technical Achievement Award. He was co-author of several papers that received the following awards: best IEEE Transactions on EMC paper award for the year 2017, in 2014 best paper award at the 13th International Conference on Probabilistic Methods Applied to Power Systems, Durham, UK, in 2013 Basil Papadias best paper award at the 2013 IEEE PowerTech, Grenoble, France, in 2008 best paper award at the International Universities Power Engineering Conference (UPEC). He was the founder Editor-in-Chief of the Elsevier journal Sustainable Energy, Grids and Networks and was Associate Editor of the IEEE Transactions on Industrial Informatics. His research interests are in power systems with particular reference to real-time monitoring and operation, power system protections, power systems dynamics and power system transients. Mario Paolone is author or coauthor of over 300 scientific papers published in reviewed journals and international conferences.

Martin Peter Bieri

Mission PhD student and research assistant Martin Bieri is a PhD student at the Laboratory of Hydraulic Constructions (LCH) of the Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland. He obtained his Master’s degree in Civil Engineering at the same university in 2007. During his graduation he worked as trainee for different engineering companies in Switzerland. Beside his PhD topic in the field of hydrological-hydraulic modeling, he is involved in different applied research projects, physical model

Giovanni De Cesare

Expertise Numerical simulation and physical modeling of hydraulic works and schemes; reservoir sedimentation and turbidity currents; reservoir sediment management; Ultrasonic Doppler flow measurement; river training work and restoration; soil bioengineering and nature based solutions; fluvial eco-morphology; rapid transients in pressurized waterways; technology transfer, commissioned studies and expert reports in applied hydraulics, hydraulic constructions and infrastructures; organization of continuous edu

Hans Peter Herzig

Dr. Hans Peter Herzig is Professor at the Ecole Polytechnique Fédérale de Lausanne (EPFL) and Past President of the European Optical Society (EOS). His current research interests include refractive and diffractive micro-optics, nano-scale optics and optical MEMS. Hans Peter Herzig received his diploma in physics from the Swiss Federal Institute of Technology in Zürich, Switzerland, in 1978. From 1978 to 1982 he was a scientist with the Optics Development Department of Kern in Aarau, Switzerland, working in lens design and optical testing. In 1983, he became a graduate research assistant with the Applied Optics Group at the Institute of Microtechnology of the University of Neuchâtel, Switzerland, working in the field of holographic optical elements. In 1987, he received his PhD degree in optics. From 1989 to 2001 he was head of the micro-optics research group in Neuchâtel. From 2002 to 2008 he was a full professor and head of the Applied Optics Laboratory at the University of Neuchâtel. Professor Herzig joined the faculty at EPFL in January 2009. He is member of OSA, IEEE Photonics Society and Fellow of EOS. 2009-2010 he was President of the European Optical Society (EOS), 2001-2009 Vice-President of the Swiss Society of Optics and Microscopy and 2012-2014 Vice-President of ICO. Dr. Herzig is in the editorial board of different scientific journals (JM3, Optical Review, JEOS). He served as Conference Chairman for international conferences of EOS, IEE, IEEE/LEOS, OSA and SPIE; and as Guest Editor of three special issues of IEEE, OSA journals. He is editor of a well-known book on micro-optics (published in English and Chinese), author of 14 book chapters, over 150 peer reviewed articles and 300 conference proceedings.

Related concepts (23)

Atomic clock

An atomic clock is a clock that measures time by monitoring the resonant frequency of atoms. It is based on atoms having different energy levels. Electron states in an atom are associated with different energy levels, and in transitions between such states they interact with a very specific frequency of electromagnetic radiation. This phenomenon serves as the basis for the International System of Units' (SI) definition of a second:The second, symbol s, is the SI unit of time.

Angstrom

The angstrom (ˈæŋstrəm; ) or ångström is a metric unit of length equal to e-10 m; that is, one ten-billionth (US) of a metre, a hundred-millionth of a centimetre, 0.1 nanometre, or 100 picometres. Its symbol is Å, a letter of the Swedish alphabet. The unit is named after the Swedish physicist Anders Jonas Ångström (1814–1874). The angstrom is often used in the natural sciences and technology to express sizes of atoms, molecules, microscopic biological structures, and lengths of chemical bonds, arrangement of atoms in crystals, wavelengths of electromagnetic radiation, and dimensions of integrated circuit parts.

Paris meridian

The Paris meridian is a meridian line running through the Paris Observatory in Paris, France – now longitude 2°20′14.02500′′ East. It was a long-standing rival to the Greenwich meridian as the prime meridian of the world. The "Paris meridian arc" or "French meridian arc" (French: la Méridienne de France) is the name of the meridian arc measured along the Paris meridian. The French meridian arc was important for French cartography, inasmuch as the triangulations of France began with the measurement of the French meridian arc.

Related exercises (2)

Asymmetrical pendulum

A pendulum is made up of a marble of mass m connected to a fixed point O with a massless string of constant length. A nail is placed at a distance d from point O, vertically below, such that the pendulum as lengthxa0L when it goes right and lengthxa0du2005+u2005L when it goes left (see diagram). The marble is placed such that the string makes an anglexa0α (α

Units and dimensional analysis

Dimensional analysis is a physical concept that helps understanding physical situations in which various physical quantities are used. It is also used to hypothetically link different physical quantities that can then be verified experimentally. For every physical quantity, there is a corresponding dimension, associated in mechanics to length (L), mass (M), time (T) and their combinations. For instance, the physical dimension of “velocity” v is length/time (L/T). The unit and dimension of a physical quant