Giancarlo Ferrari TrecateExpertise
Automatic control, Dependable control, Neural-network Control, Machine learning, Microgrids, Hybrid systems
Mission
See the webpage of the DECODE (Dependable Control and Decision) group.
Teaching & PhD PhD Students Laura Meroi, Julien Pallage, Nicolas Léo Pierre Kirsch, Simone Baratto, Daniele Martinelli, Riccardo Cescon, Jakob Nylöf, Sabri El Amrani Past EPFL PhD Students Pulkit Nahata, Mustafa Sahin Turan, Baiwei Guo, Jean-Sébastien Brouillon, Clara Galimberti, Andrea Martin, Muhammad Zakwan,
Mario PaoloneMario Paolone received the M.Sc. (with honors) and the Ph.D. degree in electrical engineering from the University of Bologna, Italy, in 1998 and 2002, respectively. In 2005, he was appointed assistant professor in power systems at the University of Bologna where he was with the Power Systems laboratory until 2011. In 2010, he received the Associate Professor eligibility from the Politecnico di Milano, Italy. Since 2011 he joined the Swiss Federal Institute of Technology, Lausanne, Switzerland, where he is now Full Professor, Chair of the Distributed Electrical Systems laboratory and Head of the Swiss Competence Center for Energy Research (SCCER) FURIES (Future Swiss Electrical infrastructure). He was co-chairperson of the technical programme committees of the 9th edition of the International Conference of Power Systems Transients (IPST 2009) and of the 2016 Power Systems Computation Conference (PSCC 2016). He was chair of the technical programme committee of the 2018 Power Systems Computation Conference (PSCC 2018). In 2013, he was the recipient of the IEEE EMC Society Technical Achievement Award. He was co-author of several papers that received the following awards: best IEEE Transactions on EMC paper award for the year 2017, in 2014 best paper award at the 13th International Conference on Probabilistic Methods Applied to Power Systems, Durham, UK, in 2013 Basil Papadias best paper award at the 2013 IEEE PowerTech, Grenoble, France, in 2008 best paper award at the International Universities Power Engineering Conference (UPEC). He was the founder Editor-in-Chief of the Elsevier journal Sustainable Energy, Grids and Networks and was Associate Editor of the IEEE Transactions on Industrial Informatics. His research interests are in power systems with particular reference to real-time monitoring and operation, power system protections, power systems dynamics and power system transients. Mario Paolone is author or coauthor of over 300 scientific papers published in reviewed journals and international conferences.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Jean-Louis ScartezziniDirector of EPFL Solar Energy and Building Physics Laboratory (1994-present); Founder & Director of ENAC Institute of Infrastructures, Resources and Environment (2002-2009); Founder & Director of EPFL Doctoral Program in Environment (2002-2009); Co-Director of EPFL Institute of Building Technology (1994-1997); Associate Professor of Building Physics at EPFL (1994-1997); Associate Professor of Building Physics at University of Geneva (1990-1997); Group Leader & Research Fellow at the EPFL Solar Energy Research Group (1981-1989); Research Fellow at the Applied Geophysics Institute of University of Lausanne (1980-1981).
Fabrizio SossanExpertise
Mathematical Modelling, Forecasting and Optimization for Power System Applications
Current work
He is currently working on (i) forecasting of the electrical load in application to real-time control of micro-grids and (ii) planning and development of the power system infrastructure under an increased penetration of distributed generation.
Fabrizio is an Italian citizen and was born in Genova on 9th April 1985. He got his B.Sc. and M.Sc. in Computer Engineering from the University of Genova in 2007
Drazen DujicDrazen Dujic is an Associate Professor and Head of the Power Electronics Laboratory at EPFL. He received the Dipl.Ing. and MSc degrees from the University of Novi Sad, Serbia in 2002 and 2005, respectively, and the PhD degree from Liverpool John Moores University, UK in 2008. From 2003 to 2006, he was a Research Assistant with the Faculty of Technical Sciences at University of Novi Sad. From 2006 to 2009, he was a Research Associate with Liverpool John Moores University. After that he moved to industry and joined ABB Switzerland Ltd, where from 2009 to 2013, he was Scientist and then Principal Scientist with ABB Corporate Research Center in Baden-Dättwil, and from 2013 to 2014 he was R&D Platform Manager with ABB Medium Voltage Drives in Turgi. He joined EPFL in 2014 as Tenure Track Assistant Professor and was promoted to Associate Professor in 2021. His research interests include the areas of design and control of advanced high power electronic systems and high-performance drives, predominantly for the medium voltage applications related to electrical energy generation, conversion and storage. He has authored or coauthored more than 150 scientific publications and has filed 16 patents. In 2018 he received EPE Outstanding Service Award from European Power Electronics and Drives Association and in 2014 the Isao Takahashi Power Electronics Award for Outstanding Achievement in Power Electronics. He is Senior Member of IEEE, and serves as Associate Editor for IEEE Transactions on Power Electronics, IEEE Transactions on Industrial Electronics and IET Electric Power Applications. He is Chairman of the Swiss IEEE Power Electronics Society (PELS) Chapter and IEEE PELS R8 Chair.
Solomzi MakohlisoTeaching & PhD Courses Development engineering ENV-470 This course teaches the fundamentals of technologies for development (Development Engineering) to design, pilot, and deploy appropriate, affordable and robust technologies to address sustainable development challenges and especially those related to extreme poverty in Low-income settings. Science, Technology & Vulnerability HUM-287 This course explores how science and technology can address extreme vulnerability caused by
Klaus Benedikt SchönenbergerVision: Scientific research and technology development can be mobilized to help the poorest and most vulnerable in this world. Klaus Schönenberger obtained an MSc in Microengineering (1993), followed by a PhD (1996) from the Swiss Federal Institute of Technology in Lausanne (EPFL). After a post-doc at Lawrence Livermore National Laboratory in California, he spent over 10 years in the medical devices industry in leading positions such as Vice-President of Worldwide R&D in a 100mcompanyandGlobalVice−ResidentofResearchandTechnologyina1bn company. In 2009, as he was working for a medical devices company, he received a shock: he realized that there is a huge imbalance in access to medical technology in industrialized versus low and middle-income countries. After a closer look, he discovered that he imbalance’s main cause is a mismatch between existing technologies and business models, with those needed in low and middle-income countries. He decided to leave industry and, in 2009, he co-founded the EssentialMed Foundation, an innovative non-profit venture. In 2011, realizing that both technology and business models needed a profound rethinking, he joined EPFL where he launched EssentialTech, an initiative inspired by the philosophy of EssentialMed but expanded to a much wider portfolio of "essential" technologies. The university-wide program aims to develop innovative technologies and business models, for the benefit of sustainable development in low and middle-income countries. In this role, he has already launched and overseen a dozen large projects. Major Humanitarian actors such as the ICRC, MSF and Terre des Hommes took notice of the innovative approach proposed, and decided to collaborate in 2015-2016. This has resulted notably in the joint creation between EPFL and ICRC, of the Humanitarian Tech Hub at EPFL. In May 2017, Klaus directed and launched a MOOC(Massive Open Online Course) entitled “Technology Innovation for Sustainable Development” which aims to spread the unique methodology and approach worldwide. As of today, more than 6000 people have enrolled. In 2018 a first spin-off company was created. Award winning Pristem SA will deploy an innovative new digital xray imaging system, specifically designed for low-income contexts. In December 2018, the creation of the EssentialTech centre was announced by EPFL's presidency, and Klaus is now the Centre's director. Another spin-off of the EssentialTech Centre is the company HMCare, launched in 2020, which is deploying a transparent surgical mask. Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
Dorsan Alexis A. LepourExpertise
Energy transition and decarbonizationUrban energy systemsSmart gridsRenewable energy communities
Formation Génie électromécanique | 2015 – 2018 UCLouvain Génie électrique et électronique | 2018 – 2020 EPFL
Silvia CoccoloExpertise
Urban GreeningOutdoor Thermal Comfort Urban Energy Modelling
Teaching & PhD Courses Behind/Beyond future cities AR-496 We are living in an urban world and the design of sustainable cities is essential in order to decrease our energy footprint. This course provides the instruments to understand the complex urban metabolism, as well as the solutions for planning future smart and sustainable cities. Urban neighborhoods, infrastructures and sustainable development PENS-309
Jérémy DumoulinExpertise
energy system modelling, electric mobility, solar energy, photovoltaic performance modelling
Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
