Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Metalworking

Related publications (28)

A semantic model-based systems engineering approach for assessing the operational performance of metal forming process

Dimitrios Kyritsis, Jinzhi Lu

Metal Forming is a basic and essential industrial process to provide materials for constructing complex products. To design an efficient metal forming process, the functional requirements and operational performance are two important aspects to be consider ...

Pergamon-Elsevier Science Ltd2024

Diversity of radial spin textures in chiral materials

Oleg Yazyev, Alberto Crepaldi, Daniel Gosalbez Martinez

We introduce a classification of the radial spin textures in momentum space that emerge at the high-symmetry points in crystals characterized by nonpolar chiral point groups (D2, D3, D4, D6, T, O). Based on the symmetry constraints imposed by these point g ...

Amer Physical Soc2023

Augmented-reality-assisted timber drilling with smart retrofitted tools

Yves Weinand, Julien Gamerro, Andrea Settimi

An ordinary electric drill was integrated into a context-aware augmented reality (AR) framework to assist in timber-drilling tasks. This study is a preliminary evaluation to detail technical challenges, potential bottlenecks, and accuracy of the proposed o ...

2022

Nondestructive characterization of laser powder bed fusion parts with neutron Bragg edge imaging

Roland Logé, Christian Leinenbach, Nikola Kalentics

Laser powder bed fusion is an efficient technique for additive manufacturing of metallic materials. The quality of the material produced depends on the optimization of a large range of build parameters and the complex thermo-mechanical build process is pro ...

ELSEVIER2021

SnSb binary alloy induced heterogeneous nucleation within the confined nanospace: Toward dendrite-free, flexible and energy/power dense sodium metal batteries

Dou Du

Rechargeable sodium (Na) metal batteries (SMBs) provide an alternative energy-dense, low-cost energy storage system beyond prevailing Li-ion technologies. However, their practical deployment requires the performance evaluation of Na anodes on the device le ...

ELSEVIER2021

Additive manufacturing of a precious bulk metallic glass

Roland Logé, Jamasp Jhabvala, Antonia Neels, Navid Sohrabi, Güven Kurtuldu, Annapaola Parrilli

For the first time, a high-density amorphous and crack-free bulk metallic glass (BMG) based on a precious metal (PdCuNiP) was produced via additive manufacturing (AM). Laser powder-bed fusion (LPBF) was used for the fabrication of the samples, and led to a ...

2021

Learning From Demonstration and Interactive Control of Variable-Impedance to Cut Soft Tissues

Aude Billard, Rui Wu

In this article, we propose an approach to extract variable-impedance during cutting tasks from human demonstrations, so as to ease soft-tissue cutting by robots. We model the dynamic adjustment of the human arm during interactions with the tissue and tran ...

2021

Stainless steel-like FeCrNi nanostructures via electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte

Enrico Bertero

Electrodeposition of stainless steel-like materials such as FeCrNi alloy into micro- and nanotemplates provides a sustainable framework for creating biomedical-oriented micro- and nanocomponents with outstanding characteristics. While Cr(III)-based electro ...

2020

Effect of dislocations, Al-3(Sc,Zr) distribution and ageing temperature on theta ' precipitation in Al-Cu-(Sc)-(Zr) alloys

Baptiste Thomas Jean Rouxel

The 2xxx series aluminium alloys, which contain Cu as the main addition element, are widely used in the aerospace industry for their high specific strength. The main strengthening contribution in these alloys comes from the formation of theta' precipitates ...

ELSEVIER SCI LTD2020

Towards a coherent database of thermal boundary conductance at metal/dielectric interfaces

Ludger Weber, Maïté Blank

The thermal boundary conductance (TBC) of metal/dielectric couples was measured for a large variety of metals on silicon, sapphire, and diamond using time domain thermoreflectance and compared to data previously obtained on diamond. In the case of silicon, ...

2019

Role of the electron-phonon coupling on the thermal boundary conductance of metal/diamond interfaces with nanometric interlayers

Ludger Weber, Maïté Blank, Gionata Schneider

Thermal boundary conductance (TBC) of the Ag/diamond and Au/diamond interfaces with a nanometer-thick interface layer of either nickel or molybdenum is measured by time domain thermoreflectance and modeled based on a 3-layer two-temperature model (3l-TTM). ...

2019

Critical raw materials: A perspective from the materials science community

Heinrich Hofmann

Functional materials are crucial to meet today's societal challenges and needs, such as the transition towards low carbon energy production to reduce climate change, renewable energies and green economy, clean mobility and improved communication. In order ...

ELSEVIER SCIENCE BV2018

Small-scale metal castings, small-scale metal/transparent composite structures and process to produce same

Andreas Mortensen, Yves Bellouard, Raphaël Charvet, Cyril Henri Dénéréaz

The method comprises at least the following steps: - exposing a substrate to focused laser irradiation at a preselected series of locations that trace a subset of the substrate volume that is connected to the surface of the substrate; some subsets of subst ...

2017

STEP-NC compliant process planning of additive manufacturing: remanufacturing

Ian Anthony Stroud, Jumyung Um

Additive manufacturing is becoming one of the key methods for reproducing repair sections in remanufacturing processes. The major advantage of using additive processes is to minimize production time and waste. However, the surface quality and shape accurac ...

Springer London Ltd2017

The surprising influence of continuous alternating electric current on recrystallization behaviour of a cold-rolled Aluminium alloy

Roland Logé, Cyril Cayron, Ke Huang

Pronounced acceleration of recrystallization in cold worked metals is generally observed during annealing with additional high density electric current pulses. In this work, continuous alternating current of low density was applied to heat cold-rolled samp ...

Elsevier2017

Post-tensioned CFRP strap elements for civil engineering applications

Thomas Keller

Two applications of post-tensioned CFRP strap elements recently developed at the Composite Construction Laboratory (CCLab) of the Swiss Federal Institute of Technology Lausanne (EPFL) are presented. The first application concerns post-tensioned non-laminat ...

2017

W-Band Waveguide Filters Fabricated by Laser Micromachining and 3-D Printing

Emile Jacques de Rijk

This paper presents two W-band waveguide bandpass filters, one fabricated using laser micromachining and the other 3-D printing. Both filters are based on coupled resonators and are designed to have a Chebyshev response. The first filter is for laser micro ...

Institute of Electrical and Electronics Engineers2016

Optimisation of industrial production of low-force sensors – adhesive bonding of force-centring ball

Thomas Maeder, Peter Ryser, Caroline Marguerite Jacq

This work addresses the issue of attaching the force-centring part (a round ball) to the load cell of a force sensor, a piezoresistive thick-film Wheatstone bridge deposited onto a ceramic cantilever. As the current soldering process requires expensive met ...

IOP2015

A green productivity based process planning system for a machining process

Ian Anthony Stroud

In the metal cutting industry, manufacturers have strived to increase energy efficiency and to reduce environmental burdens through the use of dust collectors and waste disposers. It is more beneficial and efficient to apply the front-of-pipe technology th ...

Taylor & Francis Ltd2015

L4Fe2As2Te1-xO4-yFy (L = Pr, Sm, Gd): A layered oxypnictide superconductor with T-c up to 45 K

László Forró, Richard Gaal, Sergiy Katrych, Andrea Pisoni

The synthesis and structural and physical properties of iron lanthanide oxypnictide superconductors, L4Fe2As2Te1-xO4 (L = Pr, Sm, Gd), with transition temperature at similar to 25 K are reported. Single crystals have been grown at high pressure using the c ...

Amer Physical Soc2014