Manuel Guizar SicairosTeaching & PhD PhD Students Aknur Karabay, Pengju Sheng, Wenxuan Fang Courses Physical Optics and Advanced Imaging PHYS-715 This course gives an introduction to principles of Fourier and physical optics, numerical propagation, and sampling. On the second half the course covers topics of advanced imaging, including 3 external lecturers who are experts in application or development of advanced imaging techniques.
Farhad Rachidi-HaeriFarhad Rachidi (IEEE Fellow, EMP Fellow, Electromagnetics Academy Fellow) was born in Geneva in 1962. He received the M.S. degree in electrical engineering and the Ph.D. degree from the Swiss Federal Institute of Technology, Lausanne, in 1986 and 1991 respectively.
He worked at the Power Systems Laboratory of the same institute until 1996 and had several short stays at the University of Florida and the NASA Kennedy Space Center. In 1997, he joined the Lightning Research Laboratory of the University of Toronto in Canada and from April 1998 until September 1999, he was with Montena EMC in Switzerland. He is currently a titular professor and the head of the EMC Laboratory at the Swiss Federal Institute of Technology, Lausanne, Switzerland.
His research interests concern electromagnetic compatibility, lightning electromagnetics and electromagnetic field interactions with transmission lines.
Dr. Rachidi is currently a member of the Advisory Board of the IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY and the President of the Swiss National Committee of the International Union of Radio Science.
He has received numerous awards including the 2005 IEEE EMC Technical Achievement Award, the 2005 CIGRE Technical Committee Award, the 2006 Blondel Medal from the French Association of Electrical Engineering, Electronics, Information Technology and Communication (SEE), the 2016 Berger Award from the International Conference on Lightning Protection, the 2016 Best Paper Award of the IEEE Transactions on EMC, and the 2017 Motohisa Kanda Award for the most cited paper of the IEEE Transactions on EMC (2012-2016).
In 2014, he was conferred the title of Honorary Professor of the Xi’an Jiaotong University in China.
He served as the Vice-Chair of the European COST Action on the Physics of Lightning Flash and its Effects from 2005 to 2009, the Chairman of the 2008 European Electromagnetics International Symposium, the President of the International Conference on Lightning Protection from 2008 to 2014, the Editor-in-Chief of the Open Atmospheric Science Journal (2010-2012) and the Editor-in-Chief of the IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY from 2013 to 2015. He is a Fellow of the IEEE and of the SUMMA Foundation, and a member of the Swiss Academy of Sciences.
He is the author or coauthor of over 200 scientific papers published in peer-reviewed journals and over 400 papers presented at international conferences.
Pascal FrossardTeaching & PhD PhD Students Yiming Qin, Alba Carballo Castro, Elisa Messori, Ke Wang, Sevda Ögüt, Tuna Alikasifoglu, William Cappelletti, Manuel Madeira, Mahdi Amiri, Ortal Yona Senouf, Vasiliki Rizou, Cem Bilaloglu, Abdellah Rahmani, Amel Abdelraheem, Jérémy Jean Philippe Baffou, Adam Hazimeh, Vincent Jung, Yike Zhao Past EPFL PhD Students Dan Jurca, Jean-Paul Wagner, Ivana Radulovic, Ivana Tosic, Effrosyni Kokiopoulou, Zafer Arican, Vijayaraghavan Thirumalai, Tamara Tosic, Eirina Bourtsoulatze, Elif Vur
Simon Nessim HeneinBorn in 1973 and of Egyptian-Swiss nationality, Simon Henein grew up in Cairo. He obtained an engineering degree at the Ecole Polytechnique Fédérale de Lausanne (EPFL) in 1996 and went on to complete his doctorate at the EPFL in 2000. In 2001, he published the book “Conception des guidages flexibles” which has become a reference in precision engineering. He then joined the Centre Suisse d’Electronique et Microtechnique (CSEM), Neuchatel, Switzerland, where he conceived and developed mechanisms for robotic, aerospace, medical and watchmaking applications. He pursued his research career at the Paul Scherrer Institute, Villigen, Switzerland, where he developed instruments for the Swiss Light Source Synchrotron (SLS). Since November 1st, 2012, he is associate professor in microengineering at the EPFL, holder of the Patek Philippe Chair and director of the Micromechanical and horological design laboratory (Instant-Lab).
Amela Groso2016 - Present: DSPS-Safety Competence Center, EPFL andISIC-Group of Chemical and Physical Safety2007 - 2016:Occupational Safety and Health at the Faculty of Basic Sciences, EPFL Education : 2004 - 2006 : Postdoctoral fellow at the beamline for Microtomography, Swiss Light Source, Paul Scherrer Institute (PSI), Switzerland 2000 - 2004: PhD student of Prof. Margaritondo G., Institut de physique de la matière complexe, EPFL, SwitzerlandPhD, physics 1997 - 2000: Holder of research fellowship for training on beamlines and experimental stations at the Elettra, Synchrotron Light Source, Trieste (Italy). 1991 - 1997: MSc in Physics, Physics department of the University of Sarajevo (Bosnia and Herzegovina)
Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Klaus Benedikt SchönenbergerVision: Scientific research and technology development can be mobilized to help the poorest and most vulnerable in this world. Klaus Schönenberger obtained an MSc in Microengineering (1993), followed by a PhD (1996) from the Swiss Federal Institute of Technology in Lausanne (EPFL). After a post-doc at Lawrence Livermore National Laboratory in California, he spent over 10 years in the medical devices industry in leading positions such as Vice-President of Worldwide R&D in a 100mcompanyandGlobalVice−ResidentofResearchandTechnologyina1bn company. In 2009, as he was working for a medical devices company, he received a shock: he realized that there is a huge imbalance in access to medical technology in industrialized versus low and middle-income countries. After a closer look, he discovered that he imbalance’s main cause is a mismatch between existing technologies and business models, with those needed in low and middle-income countries. He decided to leave industry and, in 2009, he co-founded the EssentialMed Foundation, an innovative non-profit venture. In 2011, realizing that both technology and business models needed a profound rethinking, he joined EPFL where he launched EssentialTech, an initiative inspired by the philosophy of EssentialMed but expanded to a much wider portfolio of "essential" technologies. The university-wide program aims to develop innovative technologies and business models, for the benefit of sustainable development in low and middle-income countries. In this role, he has already launched and overseen a dozen large projects. Major Humanitarian actors such as the ICRC, MSF and Terre des Hommes took notice of the innovative approach proposed, and decided to collaborate in 2015-2016. This has resulted notably in the joint creation between EPFL and ICRC, of the Humanitarian Tech Hub at EPFL. In May 2017, Klaus directed and launched a MOOC(Massive Open Online Course) entitled “Technology Innovation for Sustainable Development” which aims to spread the unique methodology and approach worldwide. As of today, more than 6000 people have enrolled. In 2018 a first spin-off company was created. Award winning Pristem SA will deploy an innovative new digital xray imaging system, specifically designed for low-income contexts. In December 2018, the creation of the EssentialTech centre was announced by EPFL's presidency, and Klaus is now the Centre's director. Another spin-off of the EssentialTech Centre is the company HMCare, launched in 2020, which is deploying a transparent surgical mask. Andreas PautzTeaching & PhD PhD Students Sofia Portolan, Michel Saliba, Bishal Torrente, Alexis Paul Boris Claude Dupont-Bembinoff, Cynthia Camila Güttlein Past EPFL PhD Students Ting Zhu, Vladimir Vladimirov Brankov, Boris Aviv Hombourger, Damar Canggih Wicaksono, Petra Mala, Adolfo Rais, Valentyn Bykov, Daniel Jerôme Siefman, Evgeny Nikitin, Dionysios Chionis, Oskari Ville Pakari, Friederike Bostelmann, Jiani Gao, Efstathios Vlassopoulos, Alessandro Scolaro, Stefan Radman, Alexander Aures, Lubomír Bures, Ahmed Salah
Charlotte GrossiordTeaching & PhD PhD Students Maxwell Zachary Wallace Bergström, Julie Anne Botzas-Coluni, Cross Jacob Heintzelman, Léo César Bernard Jacquat, Céline Joanna Sijlmans Past EPFL PhD Students Eugénie Mas, Laura Mekarni, Janisse Deluigi, Thibaut Juillard Courses Applied ecology ENV-422 The course will provide the ecological systems knowledge needed to question applied sustainability solutions. We willcritically assess the complexity of current environmental issues, illustrating basic ecological
