Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Electrical ballast

Related publications (16)

Visual comfort without borders: Extending daylight glare prediction to dim daylit environments

Geraldine Cai Ting Quek

Avoiding discomfort glare is one of the critical aspects of maintaining visual comfort, which significantly influences occupants' overall satisfaction with their indoor environment. Discomfort glare prediction models have been developed for various lightin ...

EPFL2022

Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy

Particle accelerators foresee the use of Nb3Sn in the next generation of dipole magnets. A common design strategy is to grade the coil, i.e., to optimize the quantity of superconductor in the turns with respect to the magnetic field intensity. As a consequ ...

IEEE Institute of Electrical and Electronics Engineers2022

Distributed Optimal Power Flow for VSC-MTDC Meshed AC/DC Grids Using ALADIN

Colin Neil Jones, Yuning Jiang

The increasing application of voltage source converter (VSC) based high voltage direct current (VSC-HVDC) technology in power grids has raised the importance of incorporating DC grids and converters into the existing transmission network. This poses signif ...

IEEE Institute of Electrical and Electronics Engineers2022

Material and Electrical study of HfO2-Based Resistive Random Access Memories (ReRAMs)

Behnoush Attarimashalkoubeh

Resistive Random Access Memories (ReRAMs) have been researched intensively in the last past decades as a promising alternatives technology for the next-generation non-volatile memory (NVM) devices. ReRAMâ s excellent performance properties such as high sw ...

EPFL2019

Medium Frequency Transformer Leakage Inductance Modeling and Experimental Verification

Drazen Dujic, Marko Mogorovic

This paper provides detailed analytical modelling and finite elements method (FEM) analysis of the medium frequency transformer (MFT) leakage inductance, as one of the key design factors governing the operation of galvanically isolated power electronics co ...

2017

Energy analysis of a DEAP based cylindrical actuator coupled with a radial negative stiffness spring

Yves Perriard, Yoan René Cyrille Civet, Jonathan André Jean-Marie Chavanne

The main problem to obtain considerable deformation with dielectric electro-active polymer based technology is the electrical breakdown. A simple solution consists in pre-stretching the elastomer before activating it which cancels the snap-through effect a ...

Spie-Int Soc Optical Engineering2017

Multifunctional shape memory electrodes for dielectric elastomer actuators enabling high holding force and low-voltage multisegment addressing

Herbert Shea, Samuel Rosset, Nadine Besse, David James McCoul

Dielectric elastomer actuators (DEAs) are an attractive form of electromechanical transducer, possessing high energy densities, an efficient design, mechanical flexibility, high speed, and noiseless operation. They have been incorporated into a variety of ...

Institute of Physics2016

Upper critical field, pressure-dependent superconductivity and electronic anisotropy of Sm4Fe2As2Te1-xO4-yFy

László Forró, Bálint Náfrádi, Richard Gaal, Sergiy Katrych, Péter Szirmai, Andrea Pisoni

We present a detailed study of the electrical transport properties of a recently discovered iron-based superconductor: Sm4Fe2As2Te0.72O2.8F1.2. We followed the temperature dependence of the upper critical field by resistivity measurement of single crystals ...

Iop Publishing Ltd2016

Electrical energy balance contest in Solar Decathlon Europe 2012

Inaki Navarro Oiza

Solar Decathlon Europe (SDE) is an international multidisciplinary competition in which 20 university teams build and operate energy-efficient solar-powered houses. The aim of SDE is not only scientific but also educational and divulgative, making visitors ...

Elsevier Science Sa2014

In situ copper–alumina composites

Andreas Mortensen, Carmen Krüger

We present a process for the production of Cu-Al matrix composites containing between 25 and 30 vol.% in situ Al2O3. The composites are prepared by pressing, heat-treating and hot working blended powders of Cu, Al and CuO packed into copper alloy cans. The ...

Elsevier2013

Simulation of Electrical Discharge Initiated by a Nanometer-Sized Probe in Atmospheric Conditions

Jürgen Brugger

In this paper, a two-dimensional nanometer scale tip-plate discharge model has been employed to study nanoscale electrical discharge in atmospheric conditions. The field strength distributions in a nanometer scale tip-to-plate electrode arrangement were ca ...

Iop Publishing Ltd2013

Optimization of electric shunt resonant circuits for electroacoustic absorbers

Hervé Lissek, Romain Boulandet, Etienne Thierry Jean-Luc Rivet

Sound absorption can be achieved in a relatively simple manner with passive or active electroacoustic absorbers. Electroacoustic absorbers are basically loudspeakers, the membrane of which is used as an absorber/reflector of sound, and the electric termina ...

2012

Electroacoustic absorbers I: bridging a gap between active acoustic feedback control and shunt loudspeakers

Romain Christophe Rémy Fleury, Hervé Lissek, Romain Boulandet

Variable acoustic properties can be obtained at the diaphragm of an electroacoustic transducer, with the help of very basic control strategies, among which is the simple electrical shunting of the transducer. These shunt techniques are compared to active a ...

2011

From the electrical shunting of a loudspeaker to active impedance control

Hervé Lissek

Variable acoustic properties can be obtained on an electroacoustic transducer’s voicing face by very basic control strategies, among which are the shunting of the loudspeaker (shortcut, variable electric load, or negative resistance disposals). It is prove ...

2008

Ultra-thin nanograin polysilicon devices for hybrid CMOS-NANO integrated circuits

Serge Ecoffey

The aim of this research is to develop and to evaluate devices and circuits performances based on ultrathin nanograin polysilicon wire (polySiNW) dedicated to room temperature operated hybrid CMOS-"nano" integrated circuits. The proposed polySiNW device is ...

EPFL2007

Design and Control of a Supercapacitor Storage System for Traction Applications

Alfred Rufer, Philippe Barrade

The storage system in this paper is made of supercapacitors. The main goal is to ensure an efficient energy management in a series hybrid vehicle, even if braking resistors are still needed. Design considerations are discussed. In particular the influence ...

2005