Livia Eleonora Bove KadoExpertise
high pressure research on simple molecular liquidsstructural and dynamical properties of ice and ice clathrates under extreme conditions structural and dynamical propertie of water and aqueous solutionspolyamorphism and glass transitionliquid metals dynamics
Expertise
high pressure research on simple molecular liquidsstructural and dynamical properties of ice and ice clathrates under extreme conditions structural and dynamical propertie of water and aqueous solutionspolyamorphism and glass transit
Valentin SimeonovResearchComplete publication list Valentin SimeonovCollaborateur scientifique- EPFL ENAC EFLUMList of publicationsRefereed 1. V. Mitev, V. Simeonov, and I. Grigorov, "Model experiment in measuring the temperature and concentration of water vapours in air by spontaneous Raman scattering", Bulg. J. Phys. 9, No 5, pp. 549-558, (1982)2. V. Mitev, V. Simeonov, and I. Grigorov, ”Atmospheric gases temperature measurements by pure rotational Raman scattering”, Russian Journal of Applied Spectroscopy, 39,
Emad OveisiDr Emad Oveisi is a senior scientist at the Interdisciplinary Centre for Electron Microscopy (CIME), EPFL.
Emad received a BSc in Metallurgy and Materials Engineering (2005) and an MSc in Materials Science (2008) both from the University of Tehran (Iran). He graduated with a PhD in Materials Science and Engineering at EPFL in 2014 for a thesis on the "Three-Dimensional STEM Imaging of Dislocations" under the direction of Prof. Cécile Hébert. The PhD thesis at the Electron Spectrometry and Microscopy Laboratory (LSME), served as an introduction to many of the advanced microscopy techniques that have proven to be a platform for his research career. A post-doctoral research at the centre for electron microscopy gave him the opportunity to peruse a cutting-edge research on one of the most modern aberration-corrected transmission electron microscopes.Since the inauguration of the Energypolis campus of EPFL in Sion, he has been the manager and reference scientist of the electron microscopy platform of EPFL-Valais, working with 9 research groups and more than 200 researchers. In addition to this core responsibility, he provides advanced microscopy consulting and service to EPFL scientists and assist their research to the highest level possible.
Emad Oveisi’s research focuses on the application and development of novel electron microscopy techniques, with emphasis on 3D imaging of crystal defects, as well as the precision measurement of materials properties using aberration-corrected S/TEM. In 2018, he received the prestigious Microscopy Innovation Award for inventing “Single-shot three-dimensional electron imaging”, a novel technique that enables 3D imaging of in situ dynamics.
In 2016 Emad was elected as an interim representative for the scientific staff ("corps intermédiaire") to the Council of the Institute of Chemistry (ISIC). Since 2019, he is a member of EPFL Teachers’ Council (CCE) and has been elected as one of its four bureau members. This role allows him to be exposed to new ideas and pedagogical challenges, as well being involved in discussions with the Vice Presidency of Education (VPE) and other teaching organisations for defining teaching strategies at the EPFL.
Cécile HébertCécile Hébert was born in France in 1970. She obtained her Ingeneer degree (physics) and her PhD degree (design of a new energy filter for transmission electron microscopy, under the direction of Prof. B. Jouffrey) at the Ecole Centrale in Paris.
As a post doc with Prof. P. Schattschneider, she was working on the calculation of the fine structure of ionisation edges in EELS. As a research assistant at the Vienna University of Technology, she was one of the main participant to the CHIRALTEM project dealing with the measurement of magnetic circular dichroism in the electron microscope.
Yves RevazYves Revaz is a scientist at LASTRO/EPFL. After successful studies in physics at EPFL, he accomplished his PhD entitled: "Dynamics of external regions of spiral galaxies and constraints on the dark matter", at the Geneva Observatory in the galactic dynamics group of Prof. D. Pfenniger. He then moved to the Paris Observatory to work at the LERMA (Laboratory for Studies of Radiation and Matter in Astrophysics) under the supervision of Prof. F. Combes on the understanding of cooling flows in galaxy clusters. He joined LASTRO at EPFL in 2007, where, in collaboration with Pascale Jablonka, he developed a new TreePM/SPH chemo-dynamical code called GEAR, designed to study the chemical evolution of galaxies. His current main research focus on the evolution of dwarf spheroidal galaxies and their link with the cosmology. Yves Revaz is also the author of pNbody, a parallelized python toolbox designed to manipulate large N-body systems.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Marie Estelle Solange ViolayExpertise
-Rock mechanics-Rock physics-Fault and earthquake mechanics-Hydro-mechanical couplings
Teaching & PhD PhD Students Cindy Mikaelian, Francesco Lazari, Franco Matías Robbiano Muñoz, Karin Andrea Hofer Apostolidis, Andrea Mazzeo Past EPFL PhD Students Felipe Orellana, Mateo Acosta, Chiara Cornelio, Corentin Noël, Federica Paglialunga, Antoine Guggisberg Courses Designing Testing Machines for Geomechanics ME-700 Develop your own machines to meet your scientific needs. Learn how to bu
Wolf Hendrik HuwaldDr. Hendrik Huwald is a scientist at the Laboratory of Cryospheric Sciences (CRYOS) and a lecturer at the Environmental Sciences and Engineering Section (SSIE) of the Swiss Federal Institute of Technology in Lausanne (EPFL). He completed his PhD in 2003 at the Swiss Federal Institute of Technology in Zürich (ETHZ), developing a numerical model for sea ice and studying energy transfer processes in the Arctic. Between 2005 and 2012 he was a post-doctoral fellow and scientist at the Laboratory of Environmental Fluid Mechanics and Hydrology (EFLUM) of EPFL working on Alpine snow-atmosphere interaction, and energy balance-related research mainly in mountain regions. During this time, he designed, led and participated in numerous large field experiments in different environments. In 2013 he joined the newly founded CRYOS laboratory where he conducted research in the domains of snow science, hydrology, boundary layer meteorology and environmental sensing. He has extensive experience with project management both on national and international level.
Jean-Paul Richard KneibExpertise
Cosmology, Gravitational Lensing, Redshift Survey, First Galaxies, Cluster of Galaxies, Fiber-positioner robotic system, Radio Astronomy, Space Sustainibility
Current work
- Former Principal investigator of the SDSS-IV eBOSS project. This is an international project assembling more than 150 participants located mainly in Europe, USA and China. This project will observe 1.5 million galaxy and quasars over 2014-2020 to accurately measure the expansion history of the Universe. * Member of the DESI co
