Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Metal foam

Related publications (27)

Controlling On-Surface Photoactivity: The Impact of π-Conjugation in Anhydride-Functionalized Molecules on a Semiconductor Surface

Christian Wäckerlin

On-surface synthesis has become a prominent method for growing low-dimensional carbon-based nanomaterials on metal surfaces. However, the necessity of decoupling organic nanostructures from metal substrates to exploit their properties requires either trans ...

Wiley-VCH Verlag GmbH2024

A semantic model-based systems engineering approach for assessing the operational performance of metal forming process

Dimitrios Kyritsis, Jinzhi Lu

Metal Forming is a basic and essential industrial process to provide materials for constructing complex products. To design an efficient metal forming process, the functional requirements and operational performance are two important aspects to be consider ...

Pergamon-Elsevier Science Ltd2024

Electronic metadevice

Elison de Nazareth Matioli, Mohammad Samizadeh Nikooytabalvandani

Electronic metadevice comprising a conductive channel; a metal layer superposed on the conductive channel; and a barrier layer located between the metal layer and the conductive channel. The metal layer includes at least one recess extending through the me ...

2023

How Acid Washing Nickel Foam Substrates Improves the Efficiency of the Alkaline Hydrogen Evolution Reaction

Jan Van Herle, Suhas Nuggehalli Sampathkumar

Nickel foam substrates are frequently utilised as porous 3D substrates for renewable energy applications. The preparation of these substrates usually includes an acid-washing step, but the degree to which this step affects the final electrochemical perform ...

MDPI2023

Experimental Characterization of Additively Manufactured Metallic Heat Exchangers

Mahbod Heidari

In this study, three manifold-microchannel heat exchangers were additively manufactured by direct metal laser sintering. The heat exchangers were manufactured from stainless steel (SS17-4) with an overall dimension of 64.2 x 46.0 x 27.1 mm. The thermal and ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Pressure Drop and Convective Heat Transfer in Different SiSiC Structures Fabricated by Indirect Additive Manufacturing

Sophia Haussener, Ehsan Rezaei

The microstructure of porous materials has a significant effect on their transport properties. Engineered cellular ceramics can be designed to exhibit properties at will, thanks to the advances in additive manufacturing. We investigated the heat and mass t ...

ASME2020

Effect of solute-solute interactions on strengthening of random alloys from dilute to high entropy alloys

William Curtin, Shankha Nag

The yield strength of random metal alloys, i.e. alloys with random occupation of the crystalline lattice sites by the elemental constituent atoms all considered as solutes, is primarily understood as controlled by solute/dislocation interactions. Solute-so ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Two-dimensional quasi-static debonding in GFRP/balsa sandwich panels

Thomas Keller, Anastasios Vassilopoulos, Aida Cameselle Molares

The two-dimensional (2D) debonding behavior of GFRP/balsa sandwich panels presenting embedded circular disbonds at the face sheet/core interface was experimentally investigated. The bottom of the panels was fixed and out-of-plane quasi-static tensile loads ...

2019

Inkjet printing and electrocatalysis

Victor Costa Bassetto

The transition in energy matrix, from fossil to renewable energy sources, will require the utilization of grid levelling alternatives to cope with the intermittent characteristic of renewable energy. Advanced electrochemical energy conversion and storage d ...

EPFL2019

Tailoring thermal properties of functional materials

Xavier François Mettan

Thermal conductivity (k) plays an essential role in functional devices. In some cases, high value is required to transfer heat efficiently. In others, low k assists in maintaining a temperature gradient necessary for device operation. It is profitable to d ...

EPFL2019

Laser shock peening: A promising tool for tailoring metallic microstructures in selective laser melting

Roland Logé, Ke Huang, Nikola Kalentics, Manuel Ortega Varela De Seijas

Metallic parts made by Selective Laser Melting (SLM) are known for their heterogeneous microstructures in the as-built (AB) state. In this paper, Laser Shock Peening (ISP) was performed on a 316 L stainless steel part fabricated by SLM. The LSP treatment i ...

2019

Dynamic wetting in pressure-infiltration of ceramic particle preforms by molten metal

Gionata Schneider

This thesis investigates the interaction between mechanically induced flow of a liquid metal into a porous solid, and kinetic effects at the triple line. The approach is experimental and focuses on metal-ceramic systems for which the literature gives value ...

EPFL2019

Ni-Al2O3 nacre-like composites through hot-pressing of freeze-cast foams

Maxime Garnier

A multi-step process is developed to create a nacre-like ceramic/metal composite. First, a slurry of Ni-coated alumina platelets and NiO nano-particles is directionally freeze-cast and the ice is sublimed, creating a foam with aligned lamellar walls contai ...

2019

Two-dimensional crack growth in FRP laminates and sandwich panels

Aida Cameselle Molares

Fiber-reinforced polymer (FRP) composite materials are currently being selected for the design of lightweight and efficient structural members in a wide number of engineering applications. Sandwich panels with glass fiber-reinforced polymer (GFRP) face she ...

EPFL2019

Micro-mechanics of 3D architectured metals synthesized by electrodeposition

Maxime Alain Baptiste Mieszala

Cellular metallic materials have emerged as a new promising class of materials due to their lightweight porous structures and advanced multi-functional properties. Originally limited to random metallic foams, modern lithography techniques have enabled the ...

EPFL2018

Hypervelocity impact testing on stochastic and structured open porosity cast Al-Si cellular structures for space applications

Andreas Mortensen

A hypervelocity (6.7–7.0 km/s) impact testing campaign was conducted using Ø 2 mm, 95% Al projectiles onto A357 aluminium alloy stochastic foams with 4–5 mm typical pore dimensions, or alternatively diamond cubic periodic structures of cast AlSi12 with a 6 ...

2018

Periodic cellular aluminum structures for space applications : from casting to additive manufacturing

Florian Thibaut Gallien

Mass is one of the crucial parameters for hardware that has to be placed in Earth orbit. Due to its harsh environment, a material with highest specific properties is desired to achieve space missions. The rise and development of new technologies, such as a ...

EPFL2018

Replicated microcellular aluminium structures for thermal management

Alexandros Athanasiou-Ioannou

Open-pore aluminium foams are of interest in thermal management of power electronics due to their large specific surface area, low weight and relatively high thermal conductivity. The replication process is a low-cost and simple foam manufacturing method t ...

EPFL2017

Heat expandable biopolymers for one-step production of foam core sandwich composites

Yonghoon Yoon

The overall aim of this work has been to develop sustainable solid thermally activated foam precursors suitable for the in-line production of lightweight bio-based foam core sandwich structures with consolidated wood particle facings, using a non-inflammab ...

EPFL2016

Measuring the accuracy of softball impact simulations

Pascal Fua

A study has been conducted to review viscoelastic and foam-constitutive models to describe sport ball response to impact with a rigid cylindrical surface. The impact model was developed to simulate a ball-bat collision. Comparisons were made to actual impa ...

Springer London Ltd2016