Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Polylactic acid

Related publications (31)

Advances in High-Speed, Multiparametric Atomic Force Microscopy

Santiago Harald Andany

After decades of technological advancements, high-speed atomic force microscopy (HS-AFM) has emerged as a powerful technique for visualizing dynamic processes. At the nanoscale, the AFM provides valuable insights into the sample by sensing minute interacti ...

EPFL2024

Additive and digital manufacturing of transient sensors and bioelectronics

Nicolas Francis Fumeaux

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

EPFL2023

High-performance triboelectric nanogenerator via photon-generated carriers for green low-carbon system

Xin Chen

Enhancing the surface charge density and reducing the output impedance via innovative techniques are essential to accelerate the commercialization of triboelectric nanogenerators (TENGs). However, methods for increasing output performance have numerous lim ...

Elsevier2023

Photodegradation of biodegradable plastics in aquatic environments: Current understanding and challenges

Florian Frédéric Vincent Breider

Direct photolysis and indirect photolysis are important abiotic processes in aquatic environments through which plastics can be transformed physically and chemically. Transport of biodegradable plastics in water is influenced by vertical mixing and turbule ...

2023

Tailoring the performance of nanocellulose-based multilayer-barrier paperboard using biodegradable-thermoplastics, pigments, and plasticizers

Tiffany Abitbol

In this work a multilayer barrier paperboard was produced in a roll-to-roll process by slot-die coating of nanocellulose (microfibrillated cellulose or carboxymethylated cellulose nanofibrils) followed by extrusion coating of biodegradable thermoplastics ( ...

SPRINGER2023

A novel interfacial polymerization assisted phase inversion process for the facile fabrication of ion-selective nanofiltration membranes

Zongyao Zhou

Interfacial polymerization (IP) and non-solvent induced phase inversion (NIPS) are the two most commonly used mainstream technologies to fabricate separation membranes. Taking their advantages, we developed a simple, facile and scalable method to integrate ...

Elsevier Science Sa2023

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

Sandro Carrara

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

Highly Efficient and Air-Stable Inorganic Perovskite Solar Cells Enabled by Polylactic Acid Modification

Yong Ding

Inorganic perovskite solar cells (PSCs) suffer from serious carrier recombination and open-circuit voltage loss because of surface defects and unfavorable energy level alignment. Herein, a polylactic acid (PLA) modification approach to improve the performa ...

WILEY-V C H VERLAG GMBH2023

Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates

Danick Briand, Luis Guillermo Villanueva Torrijo, Morgan Mc Kay Monroe

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hind ...

2023

Design of experiments to investigate multi-additive cellulose nanocrystal films

Tiffany Abitbol

Cellulose nanocrystal (CNC) suspensions can self-assemble into chiral nematic films upon the slow evaporation of water. These films are brittle, as indicated by their fracturing instead of plastically deforming once they are fully elastically deformed. Thi ...

FRONTIERS MEDIA SA2022

Recycling of Bottle Grade PET: Influence of HDPE Contamination on the Microstructure and Mechanical Performance of 3D Printed Parts

Véronique Michaud, Yves Leterrier, Adrien Julien Demongeot, Joanne Hélène Vaucher-Joset

As part of a project that aims to provide people with disabilities with simple assistive devices in Colombia, the possibility of creating a PET filament that can be printed by Fused Deposition Modelling (FDM) from beverage bottle waste was investigated, wi ...

MDPI2022

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Véronique Michaud

Nowadays the use of natural fiber composites has gained significant interest due to their low density, high availability, and low cost. The present study explores the development of sustainable 3D printing filaments based on rice husk (RH), an agricultural ...

2021

Printed Polymer Composite Sensors for Low-Power, Near Room-Temperature Detection and Classification of VOCS

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

We demonstrate the application of inkjet-printed near room-temperature chemiresistors composed of polymer-carbon black (CB) composites for detecting and classifying volatile organic compounds (VOC). Our results demonstrate that the printed sensors can sele ...

IEEE2021

Crystalline poly(triazine imide) membranes and uses thereof

Kumar Varoon Agrawal, Luis Francisco Villalobos Vazquez de la Parra

The invention relates to methods for the preparation of highly crystalline poly(triazine imide) in the form of platelets, atom-thick layers or membranes thereof and resulting products thereof, in particular useful for the preparation of gas separation memb ...

2021

Biodegradation and Antimicrobial Properties of Zinc Oxide-Polymer Composite Materials for Urinary Stent Applications

Lorenzo Lucherini

Research advancements in the field of urinary stents have mainly been in the selection of materials and coatings to address commonly faced problems of encrustation and bacterial adhesion. In this study, polylactic acid (PLA) and polypropylene (PP) were eva ...

2020

Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing

Véronique Michaud, Nicolas Candau, Oguzhan Oguz, Adrien Julien Demongeot

There is currently considerable interest in developing stiff, strong, tough, and heat resistant poly(lactide) (PLA) based materials with improved melt elasticity in response to the increasing demand for sustainable plastics. However, simultaneous optimizat ...

WILEY2021

Microstructured biodegradable fibers for advanced controlled release

Shahrzad Shadman Yazdi

Biodegradable polymers are increasingly at the heart of therapeutic devices. Particularly in the form of thin and elongated fibers, they offer an effective strategy for controlled-release in a variety of biomedical configurations such as sutures, scaffolds ...

EPFL2020

Printing on liquid elastomers

Pedro Miguel Nunes Pereira de Almeida Reis, Pierre-Thomas Paul Brun

In recent years the research community has paid significant attention to geometrically engineered materials. These materials derive their unique properties from their structure rather than their chemistry alone. Despite their success in the laboratory, the ...

ROYAL SOC CHEMISTRY2020

Quantification of Synthetic Polyesters from Biodegradable Mulch Films in Soils

Stephanie Christa Remke

Soil biodegradable mulch films composed of the polyester polybutylene adipate-co-terephthalate (PBAT) are being increasingly used in agriculture. Analytical methods to quantify PBAT in field soils are needed to assess its soil occurrence and fate. Here, we ...

2020

Reversible Oxygen Sensing Based on Multi-Emission Fluorescence Quenching

Esther Amstad, Efe Armagan

Oxygen is ubiquitous in nature and it plays a key role in several biological processes, such as cellular respiration and food deterioration, to name a few. Currently, reversible and non-destructive oxygen sensing is usually performed with sensors produced ...

2020