Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Alternator

Related publications (27)

Study of flexible operating conditions in variable-speed hydraulic turbines : advanced models and experimental validation

Martin Seydoux

The global imperative to transition from fossil fuel-based energy sources to renewable alternatives has become increasingly urgent in the pursuit of sustainable and renewable power generation. This paradigm shift necessitates innovative approaches to manag ...

EPFL2024

Torque Computation With the Isogeometric Mortar Method for the Simulation of Electric Machines

Rafael Vazquez Hernandez, Bernard Kapidani

In this work, isogeometric mortaring is used for the simulation of a six-pole permanent magnet synchronous machine. Isogeometric mortaring is especially well suited for the efficient computation of rotating electric machines, as it allows for an exact geom ...

Institute of Electrical and Electronics Engineers2022

Modelling of AC/DC Interactions of Converter-Interfaced Resources for Harmonic Power-Flow Studies in Microgrids

Mario Paolone, Andreas Martin Kettner, Yihui Zuo, Johanna Kristin Maria Becker

Modern power distribution systems experience a large-scale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). As acknowledged by recent literature, the interaction of individual CIDER components and different CIDERs through the grid ...

2022

Breakerless Protection for Voltage Source Converter-Based Marine DC Power Supply Systems

Drazen Dujic, Seongil Kim

DC power supply systems utilising voltage source converters offer several advantages compared with their counterparts in marine low-voltage DC power distribution networks. In case of a two-level voltage source converter fed by a synchronous generator which ...

IEEE2021

Data-Driven LPV Controller Design for Islanded Microgrids

Alireza Karimi, Seyed Sohail Madani

This paper presents a data-driven multivariable Linear Parameter Varying (LPV) controller design method. The synthesis process is based on frequency-domain data corresponding to different operating points of the plant. The performance and also stability co ...

ELSEVIER2021

Performance assessment of grid-forming and grid-following converter-interfaced battery energy storage systems on frequency regulation in low-inertia power grids

Mario Paolone, Sidi-Rachid Cherkaoui, Fabrizio Sossan, Yihui Zuo, Antonio Zecchino, Zhao Yuan

Power systems with large shares of converter-interfaced renewables may be characterised by low grid inertia due to the lack of frequency containment provided by synchronous generators. Battery energy storage systems (BESSs), which can adjust their power ou ...

2021

Harmonic Power-Flow Study of Polyphase Grids with Converter-Interfaced Distributed Energy Resources, Part I: Modelling Framework and Algorithm

Mario Paolone, Lorenzo Enrique Reyes Chamorro, Andreas Martin Kettner, Johanna Kristin Maria Becker

Power distribution systems are experiencing a largescale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). This complicates the analysis and mitigation of harmonics, whose creation and propagation are facilitated by the interaction ...

2021

A formula for the admittance of laterally excited bulk wave resonators (XBARs)

Luis Guillermo Villanueva Torrijo, Soumya Yandrapalli

The recently invented laterally excited bulk wave resonators (XBARs) demonstrate outstanding parameters suitable for the design of low loss filters for the fifth generation of mobile phones. The operation of XBARs can be interpreted as an excitation of ant ...

WILEY2021

Harmonic Power-Flow Study of Polyphase Grids with Converter-Interfaced Distributed Energy Resources, Part II: Model Library and Validation

Mario Paolone, Lorenzo Enrique Reyes Chamorro, Andreas Martin Kettner, Johanna Kristin Maria Becker

In Part I, a method for the Harmonic Power-Flow (HPF) study of three-phase power grids with Converter-Interfaced Distributed Energy Resources (CIDERs) is proposed. The method is based on generic and modular representations of the grid and the CIDERs, and e ...

2021

Small-scale organic Rankine cycle turbo-generator for waste heat recovery on truck engine

Kévin Rosset

Truck engine waste heat recovery (WHR) systems have been investigated for many years. Among them, organic Rankine cycle (ORC) systems show the highest potential, but still lack efficient small-scale expansion devices, in practice. Proposed expanders are of ...

EPFL2020

Effect of voltage source converters with electrochemical storage systems on dynamics of reduced-inertia bulk power grids

Mario Paolone, Fabrizio Sossan, Yihui Zuo

A major concern associated to the massive connection of distributed energy resources is the increasing share of power electronic interfaces resulting in the global inertia reduction of power systems. The recent literature advocated the use of voltage sourc ...

Elsevier2020

Protection Coordination in Marine DC Power Distribution Networks

Seongil Kim

The increasing penetration of renewable energy sources, energy storage systems (ESSs), and DC loads has opened the door to DC technology to pave its way into future grids. The shift has been more obvious in the marine domain supported by track records of i ...

EPFL2020

Data-Driven Distributed Reactive Power Sharing in Microgrids

Alireza Karimi, Seyed Sohail Madani

In this paper, reactive power sharing for Photovoltaic (PV) units in islanded microgrids has been formulated as a robust control design problem and is solved using convex optimization method. In addition to reactive power sharing, the disturbance rejection ...

IEEE2020

Extending Protection Selectivity in DC Shipboard Power Systems by Means of Additional Bus Capacitance

Drazen Dujic, Seongil Kim

DC shipboard power systems have been connsidered as a promising solution for stricter environmental regulations on ships due to their main benefits in fuel savings with variable speed engines and easy integration of energy storage systems. In order to empl ...

2020

Low-Complexity Optimization-Based Control: Design, Methods and Applications

Ivan Pejcic

Optimization-based controllers are advanced control systems whose mechanism of determining control inputs requires the solution of a mathematical optimization problem. In this thesis, several contributions related to the computational effort required for o ...

EPFL2019

MVDC Distribution Fed High Power Multi-Motor Drives

Uzair Javaid

High power variable speed drives play a major role in many industrial applications. At the moment, these high power loads are supplied by the source (grid/generator) through the state-of-the-art MVAC power distribution network. The voltage levels, in these ...

EPFL2018

A New Approach to the On-line Estimation of the Loss of Generation Size in Power Systems

Mario Paolone

Following an unintended disconnection of a synchronous generator (SG) from the power system, what is also known as a loss of generation (LoG), it is not trivial to precisely estimate the post-event power system's inertia and the LoG size. One of reasons fo ...

IEEE Institute of Electrical and Electronics Engineers2018

MEMS Generator Study for an Embedded Energy Harvesting System

Jasha Poliakine

This work has been triggered by an industrial project targeting the development of a novel regulation system for a mechanical watch. Mechanical watches have been known for over a century as one of the finest example of energy autonomous devices, embodying ...

EPFL2018

Frequency-Domain Control Design in Power Systems

Christoph Manuel Kammer

The scope of this thesis encompasses two main subjects: fixed-structure data-driven control design on one side, and control design in power systems on the other. The overall goal is to identify challenging and relevant problems in power systems, to express ...

EPFL2018

Method and Procedure in Metal Detection and Distinctive Discrimination of Size, Shape, and Location of Hidden Single and Multi-Material Targets

Chafic Abu Antoun

This work provides a procedure and methodology for the design of an electro-magnetic sensor based on induction due to ferromagnetic and pure electrically conduc-tive hidden targets. The electromagnetic sensor is made of one or several excitation coils, whi ...

EPFL2017