Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Unit testing

Related publications (29)

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

High-Resolution Modeling Without Computation Slowdown for PETALE in CROCUS

Andreas Pautz, Vincent Pierre Lamirand, Axel Guy Marie Laureau, Thomas Jean-François Ligonnet

In a collaboration between Ecole Polytechnique Fédérale de Lausanne (EPFL) and CEA, in the fall of 2020, the experimental Programme d’Étude en Transmission de l’Acier Lourd et ses Eléments (PETALE) was successfully carried out in the CROCUS reactor of EPFL ...

2024

Seismic Testing of Adjacent Interacting Masonry Structures – Analysis of a Blind Prediction

Katrin Beyer, Igor Tomic

Masonry aggregates, which emerged as layouts of cities and villages became denser, make up historical centres all over the world. In these aggregates, neighbouring structures may share structural walls that are joined at the interfaces by mortar or interlo ...

Springer2024

Seismic Testing of Adjacent Interacting Masonry Structures

Katrin Beyer, Igor Tomic

Masonry buildings form building aggregates around the world in historical centers, which developed as the layout of the city or village densified. In these aggregates, adjacent buildings can share structural walls, connected at the interfaces by interlocki ...

2023

Community-Aware Group Testing

Christina Fragouli, Suhas Diggavi, Pavlos Nikolopoulos

Group testing is a technique that can reduce the number of tests needed to identify infected members in a population, by pooling together multiple diagnostic samples. Despite the variety and importance of prior results, traditional work on group testing ha ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

On the slip burst amplitude cutoff in dislocation-rich microcrystals

Andreas Mortensen, Luciano Borasi

The plastic deformation of small-scale face-centered cubic metals exhibits intermittent slip burst events that appear on stress-strain curves as sudden strain jumps and/or load drops. These events are generally attributed to the avalanche-like cooperative ...

Pergamon-Elsevier Science Ltd2023

FISHFUZZ: Catch Deeper Bugs by Throwing Larger Nets

Mathias Josef Payer, Flavio Toffalini, Han Zheng

Fuzzers effectively explore programs to discover bugs. Greybox fuzzers mutate seed inputs and observe their execution. Whenever a seed reaches new behavior (e.g., new code or higher execution frequency), it is stored for further mutation. Greybox fuzzers d ...

Usenix Assoc2023

Specific Gestalt principles cannot explain (un)crowding

Michael Herzog, Oh-Hyeon Choung, Einat Rashal

The standard physiological model has serious problems accounting for many aspects of vision, particularly when stimulus configurations become slightly more complex than the ones classically used, e.g., configurations of Gabors rather than only one or a few ...

2023

Supplementary datasets for the manuscript "Generative machine learning produces kinetic models that accurately characterize intracellular metabolic states" - Part 3

Vassily Hatzimanikatis, Ljubisa Miskovic, Subham Choudhury, Michaël Roger Germain Moret

Supplementary files containing datasets needed to reproduce the results of the manuscript "Generative machine learning produces kinetic models that accurately characterize intracellular metabolic states" by S. Choudhury et al (https://doi.org/10.1101/2023. ...

Zenodo2023

Impact of Annealing on ZrO2 Nanotubes for Photocatalytic Application

Sami Rtimi

This work aims to study the structural, optical, and photocatalytic properties of ZrO2 nanotubes (NTs) that have been synthesized using the electrochemical anodization method. The structural and morphological characteristics of unannealed and annealed (400 ...

MDPI2023

Advancing first principle-based molecular dynamics of biological systems with machine learning

François Louis Mouvet

Molecular dynamics (MD) simulations have emerged as a transformative approach to analyse molecular systems at the atomic level, offering valuable insights into complex biological processes. Many biological phenomena can only accurately be described by inco ...

EPFL2023

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Kamil Sedlák, Yu Wu

Following the conceptual design, the engineering design of the dc magnet and cable-in-conduit conductor (CICC) for the Super-X test facility has been done in 2021. Totally three types of conductors with different structures were designed for the three pair ...

IEEE Institute of Electrical and Electronics Engineers2023

Stability of black interconnect coatings for solar photovoltaic module applications

Christophe Ballif, Antonin Faes, Alessandro Francesco Aldo Virtuani, Martin Ledinsky, Alejandro Borja Block

Building-integrated photovoltaics (BIPV) are dual purpose, providing both energy and building functions. Aesthetics play a crucial role in the BIPV market, with increasing demand for uniformly colored modules for building skins. Achieving this requires hid ...

2023

AC loss and electrical resistance of the RW3 diffusion-bonded joint

Vincenzo D'Auria

For the European DEMO fusion reactor, several options of the Toroidal Field (TF) coil design were proposed. The winding of the TF coil option 1 is based on React&Wind (RW), Nb3Sn, graded conductors in order to optimize the amount of superconductor accordin ...

2023

Testing lepton flavour universality in $B^+\to K^+\pi^+\pi^-\ell^+\ell^-$ decays with LHCb

Sara Celani

This PhD thesis aims at testing one of the fundamental properties of the Standard Model (SM) of particle physics: the lepton flavour universality (LFU), which states that

W

and

Z

bosons are equally coupled to the three lepton generations. In this work, ...

EPFL2023

Interlaboratory Test Program to Determine the Precision of the R3 Test Method (ASTM C1897-20) for Measuring Reactivity of Supplementary Cementitious Materials

Karen Scrivener, Ruben Anton Snellings, Diana Londoño Zuluaga

The substitution of portland clinker by supplementary cementitious materials (SCMs) is one of the main avenues for the further decarbonization of cement production. To secure future SCM supplies, generic and performance-related test methods for SCMs are re ...

AMER SOC TESTING MATERIALS2022

Auto-tuning deep forest for shear stiffness prediction of headed stud connectors

Xianlin Wang

The shear stiffness of headed stud connector is a critical parameter for the calculation of deflection and inter-facial shear force for steel-concrete composite structure. Thus, this study presented a promising data-driven model auto-tuning Deep Forest (AT ...

2022

Testing For The Rank Of A Covariance Operator

Victor Panaretos

How can we discern whether the covariance operator of a stochastic pro-cess is of reduced rank, and if so, what its precise rank is? And how can we do so at a given level of confidence? This question is central to a great deal of methods for functional dat ...

INST MATHEMATICAL STATISTICS-IMS2022

Full-scale testing of European steel beams with reduced beam section under reversed cyclic loading

Dimitrios Lignos, Hiroyuki Inamasu

Steel beams with reduced beam section (RBS) are often used as part of prequalified connections in seismic regions. However, RBS connections are not as common in Europe. Reasons relate to easiness in fabrication, which requires on-site welding, and the seis ...

Springer Nature2022

Robust design using multiobjective optimisation and artificial neural networks with application to a heat pump radial compressor

Jürg Alexander Schiffmann, Soheyl Massoudi, Cyril Picard

Although robustness is an important consideration to guarantee the performance of designs under deviation, systems are often engineered by evaluating their performance exclusively at nominal conditions. Robustness is sometimes evaluated a posteriori throug ...

2022