Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Solid solution

Related publications (30)

Organic matters, but inorganic matters too: column examination of elevated mercury sorption on low organic matter aquifer material using concentrations and stable isotope ratios

Lorenz Schwab

Sorption of mercury (Hg) in soils is suggested to be predominantly associated with organic matter (OM). However, there is a growing collection of research that suggests that clay minerals and oxides are also important solid phases for the sorption of solu ...

2024

Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution With Magnetite in Hydrochloric Acid Solution

Marian Nida Sagarino Lumongsod-Thompson

The high zinc and iron contents of electric arc furnace (EAF) dust in the forms of zinc ferrite (ZnFe2O4) and magnetite (Fe3O4) make it a valuable secondary source of these metals. ZnFe2O4 and Fe3O4 are known to form a solid solution at all compositions, a ...

SPRINGER2023

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

Insights on chemical and physical chloride binding in blended cement pastes

Karen Scrivener, Fabien Jacques Michel Georget, William Wilson

This study investigates chloride binding in blended cement pastes exposed to 0.5 M NaCl solutions (with and without pH adjustment) using X-ray diffraction and energy-dispersive X-ray spectroscopy image analysis (edxia). The aim is to better understand the ...

Pergamon-Elsevier Science Ltd2022

Micro-addition of Fe in highly alloyed Cu-Ti alloys to improve both formability and strength

Roland Logé, Cyril Cayron, Baptiste Thomas Jean Rouxel

Cu-Be alloys provide excellent electrical and mechanical properties, but present serious health hazards during manufacturing. Among alternative alloys, the Cu-Ti system has the highest yield strength; however, Ti cannot be easily solutionized at concentrat ...

ELSEVIER SCI LTD2022

Crossover between distinct symmetries in solid solutions of rare earth nickelates

Duncan Thomas Lindsay Alexander, Bernat Mundet

A strong coupling of the lattice to functional properties is observed in many transition metal oxide systems, such as the ABO(3) perovskites. In the quest for tailor-made materials, it is essential to be able to control the structural properties of the com ...

2021

A combined molecular dynamics and experimental study of two-step process enabling low-temperature formation of phase-pure α-FAPbI3

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Ulf Anders Hagfeldt, Paramvir Ahlawat, Essa Awadh R Alharbi, Haizhou Lu

It is well established that the lack of understanding the crystallization process in a two-step sequential deposition has a direct impact on efficiency, stability, and reproducibility of perovskite solar cells. Here, we try to understand the solid-solid ph ...

2021

Influence of pH on the chloride binding capacity of Limestone Calcined Clay Cements (LC3)

Karen Scrivener, François Henri Avet

The high solution to solid ratio normally used for the measurement of chloride binding isotherms, leads to a leaching of ions and a decrease of pH. To make binding test more representative of on-site conditions, we investigated the influence of the increas ...

Pergamon-Elsevier Science Ltd2020

Atomic Scale Investigations into the Origins of Ductility in Mg Alloys

Rasool Ahmad

The industrial applications of Mg, the lightest structural metal, and abundant in Earth's crust, are hampered by its low intrinsic ductility and low fracture toughness at room temperature which is attributed to the underlying less symmetric and plastically ...

EPFL2020

Analysis of double cross-slip of pyramidal I < c plus a > screw dislocations and implications for ductility in Mg alloys

William Curtin, Rasool Ahmad

Solute accelerated cross-slip of pyramidal < c + a > screw dislocations has recently been recognized as a crucial mechanism in enhancing the ductility of solid-solution Mg alloys. In pure Mg, cross-slip is ineffective owing to the energy difference between ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Intrinsic fracture behavior of Mg-Y alloys

William Curtin, Eleanor Yi Kei Mak

Pure magnesium (Mg) is an attractive metal for structural applications due to its low density, but also has low ductility and low fracture toughness. Dilute alloying of Mg with rare earth elements in small amounts improves the ductility, but the effects of ...

2020

Quantification methods for chloride binding in Portland cement and limestone systems

Wei Sun, Karen Scrivener, Fabien Jacques Michel Georget, Hamed Maraghechi, William Wilson, Shiyu Sui

This paper presents a comparison of methods to quantify the chloride binding capacity for cementitious materials composed of Ordinary Portland Cement (OPC) and Limestone (LS, 0 to 55% replacement). Physical and chemical chloride bindings were investigated ...

Pergamon-Elsevier Science Ltd2019

Combining experiments and modeling to explore the solid solution strengthening of high and medium entropy alloys

William Curtin, Céline Varvenne

The mechanical properties due to solid solution strengthening are explored within the single phase face-centered cubic (fcc) domain of the Co-Cr-Fe-Mn Ni high entropy alloy (HEA) system. This is achieved by combining an efficient and reproducible metallurg ...

2019

Atomistic-continuum coupling of random alloys

William Curtin, Till Junge, Shankha Nag

Random alloys are multicomponent systems where the atomic type on each lattice site is independent of the atom types on any other lattice site. The fluctuations in local atomic configurations inherent to the random alloy prevents the accurate application o ...

IOP PUBLISHING LTD2019

Water Activity from Equilibrium Molecular Dynamics Simulations and Kirkwood-Buff Theory

Satoshi Takahama, Mária Lbadaoui-Darvas

Water activity and related thermodynamic properties are calculated for several aqueous solutions using equilibrium molecular dynamics in conjunction with the recent extension of the Kirkwood-Buff (KB) theory for closed systems. The general applicability of ...

AMER CHEMICAL SOC2019

Microstructure and Mechanical Properties of a Multiphase FeCrCuMnNi High-Entropy Alloy

Roland Logé

A FeCrCuMnNi high-entropy alloy was produced using vacuum induction melting, starting from high-purity raw materials. The microstructure and mechanical properties of the as-cast FeCrCuMnNi alloy were studied, considering x-ray diffraction (XRD), scanning e ...

SPRINGER2019

Ni-Al2O3 nacre-like composites through hot-pressing of freeze-cast foams

Maxime Garnier

A multi-step process is developed to create a nacre-like ceramic/metal composite. First, a slurry of Ni-coated alumina platelets and NiO nano-particles is directionally freeze-cast and the ice is sublimed, creating a foam with aligned lamellar walls contai ...

2019

Monitoring of the UHPFRC strengthened Chillon viaduct under environmental and operational variability

Eugen Brühwiler

Constructed in 1969, the Chillon viaducts constitute a vital component of the Swiss roadway network. The bridge deck was strengthened in 2015 by means of an Ultra High Performance Fiber Reinforced Cement-based Composite for alleviating the effects of deter ...

2020

Structure and superconductivity in the binary Re1-xMox alloys

Joël Mesot

The binary Re1-xMox alloys, known to cover the full range of solid solutions, were successfully synthesized and their crystal structures and physical properties investigated via powder x-ray diffraction, electrical resistivity, magnetic susceptibility, and ...

AMER PHYSICAL SOC2019

Photorealistic modelling of metals from first principles

Nicola Marzari, Gian-Marco Rignanese, Gianluca Prandini

The colours of metals have attracted the attention of humanity since ancient times, and coloured metals, in particular gold compounds, have been employed for tools and objects symbolizing the aesthetics of power. In this work, we develop a comprehensive fr ...

Springer2019