François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Virginia LangVirginia started in the medical research field as a Coordinator of Research at the Clinical Research Unit Kennedy Institute of Johns Hopkins Medical Center. She was responsible for the initiation, coordination, and management and/or analysis of research projects in the Clinical Research Unit. These projects were funded by various Federal Government Agencies. Subsequent to Johns Hopkins Medical Center, Virginia entered the field of Human Factors through the doctoral program at SUNY Binghamton. Virginia held a fellowship at the Aeromedical Research Laboratory of the United States Air Force at Wright-Patterson AFB, Dayton, Ohio and a fellowship at NASA. Her research dealt with cognitive factors that differentially affect the characteristics of visual displays. Applications of this research are directly related to various medical devices and software applications providing Medical Device Human Factors by HirLan clients with 30 years of Human Factors experience. In addition, Virginia has extensive experience in the areas of product design, Customer Centered Participatory Design processes, and product lifecycle management. She is also known in the Human Computer Interaction and Usability Communities for her innovative techniques for collecting and incorporating user/customer feedback throughout the product lifecycle. In July 2014, Virginia founded and established the HirLan Institute of Human Factors with labs in Carlsbad, California and a Consortium arrangement in London, UK. HirLan supports Top Ten pharma/medical device companies, as well as, start-ups with consulting and testing services. These services are in conjunction with their clients’ FDA 510(k) and CE mark applications. Virginia holds a PhD in Cognitive-Experimental Psychology from SUNY Binghamton, and a Master of Science (ABT) in Applied Technology, Systems Science from SUNY Binghamton.
Andres Osorio SalazarExpertise
Robotics, advanced actuator design, soft actuators, sensor design, embedded systems, human-machine interface architecture, electronic-less control, mechanism design, additive and traditional manufacturing, industrial automation, process control, and fluid robotics.
Current Work
Smart Footwear for Diabetic Foot Care and Ulcer PreventionEvery 20 seconds, a person with diabetes has to face an amputation somewhere in the world. The main risk factor is high plantar pressure combined with foot nephropat
Cécile HardebolleCurrent work
Responsible information systems (https://go.epfl.ch/digitalethics), ethical skills Jupyter notebooks for education (https://go.epfl.ch/notebooks), digital skills, computational thinking Transversal/professional skillsEngineering design skillsFlipped classrooms Project-based learning
Education PhD | Computer Science 2006 – 2008 Université Paris-Sud XI, France Directed by Prof. Guy Vidal-Naquet MSc | Electrical Engineering, major in Computer and Inf Edoardo CharbonEdoardo Charbon (SM’00 F’17) received the Elektrotechnik Diploma from ETH Zurich, the M.S. from the University of California at San Diego, and the Ph.D. from the University of California at Berkeley in 1988, 1991, and 1995, respectively, all in electrical engineering and EECS. He has consulted with numerous organizations, including Bosch, X-Fab, Texas Instruments, Maxim, Sony, Agilent, and the Carlyle Group. He was with Cadence Design Systems from 1995 to 2000, where he was the architect of the company's initiative on information hiding for intellectual property protection. In 2000, he joined Canesta Inc., as the Chief Architect, where he led the development of wireless 3-D CMOS image sensors. Since 2002 he has been a member of the faculty of EPFL, where is a full professor since 2015. From 2008 to 2016 he was full professor and chair at the Delft University of Technology, where he spearheaded the university's effort on cryogenic electronics for quantum computing as part of QuTech. He has been the driving force behind the creation of deep-submicron CMOS SPAD technology, which is mass-produced since 2015 and is present in smartphones, telemeters, proximity sensors, and medical diagnostics tools. His interests span from 3-D vision, LiDAR, FLIM, FCS, NIROT to super-resolution microscopy, time-resolved Raman spectroscopy, and cryo-CMOS circuits and systems for quantum computing. He has authored or co-authored over 400 papers and two books, and he holds 23 patents. Dr. Charbon is a distinguished visiting scholar of the W. M. Keck Institute for Space at Caltech, a fellow of the Kavli Institute of Nanoscience Delft, a distinguished lecturer of the IEEE Photonics Society, and a fellow of the IEEE.
Kumar Varoon AgrawalExpertise
Prof. Kumar Varoon Agrawal leads research at EPFL on advanced membrane materials and processes for energy-efficient molecular separations. His work focuses on atomically thin porous graphene film, and two-dimensional zeolite & metal–organic framework membranes that enable selective transport of gases and ions, with applications in carbon capture, hydrogen purification, ammonia separation, and resource recovery. By combining materials chemistry, nanofluidics, transport phenomena, atomistic simulati
Klaus Benedikt SchönenbergerVision: Scientific research and technology development can be mobilized to help the poorest and most vulnerable in this world. Klaus Schönenberger obtained an MSc in Microengineering (1993), followed by a PhD (1996) from the Swiss Federal Institute of Technology in Lausanne (EPFL). After a post-doc at Lawrence Livermore National Laboratory in California, he spent over 10 years in the medical devices industry in leading positions such as Vice-President of Worldwide R&D in a 100mcompanyandGlobalVice−ResidentofResearchandTechnologyina1bn company. In 2009, as he was working for a medical devices company, he received a shock: he realized that there is a huge imbalance in access to medical technology in industrialized versus low and middle-income countries. After a closer look, he discovered that he imbalance’s main cause is a mismatch between existing technologies and business models, with those needed in low and middle-income countries. He decided to leave industry and, in 2009, he co-founded the EssentialMed Foundation, an innovative non-profit venture. In 2011, realizing that both technology and business models needed a profound rethinking, he joined EPFL where he launched EssentialTech, an initiative inspired by the philosophy of EssentialMed but expanded to a much wider portfolio of "essential" technologies. The university-wide program aims to develop innovative technologies and business models, for the benefit of sustainable development in low and middle-income countries. In this role, he has already launched and overseen a dozen large projects. Major Humanitarian actors such as the ICRC, MSF and Terre des Hommes took notice of the innovative approach proposed, and decided to collaborate in 2015-2016. This has resulted notably in the joint creation between EPFL and ICRC, of the Humanitarian Tech Hub at EPFL. In May 2017, Klaus directed and launched a MOOC(Massive Open Online Course) entitled “Technology Innovation for Sustainable Development” which aims to spread the unique methodology and approach worldwide. As of today, more than 6000 people have enrolled. In 2018 a first spin-off company was created. Award winning Pristem SA will deploy an innovative new digital xray imaging system, specifically designed for low-income contexts. In December 2018, the creation of the EssentialTech centre was announced by EPFL's presidency, and Klaus is now the Centre's director. Another spin-off of the EssentialTech Centre is the company HMCare, launched in 2020, which is deploying a transparent surgical mask. Kamiar AminianKamiar Aminian received the M.S. degree in electrical engineering in 1982, the Ph.D degree in biomedical engineering in 1989 and the Postgraduate degree on technical computing in 1993 from Ecole Polytechnique Fédérale de Lausanne (EPFL). He was assistant professor (1994-1996) with Sharif University of Technology (Tehran). He joint EPFL in 1996 where he is currently Professor of medical instrumentation and the director of the Laboratory of Movement Analysis and Measurement in the Institute of Bioengineering of EPFL. His research interests include methodologies for human movement monitoring and analysis in real world conditions mainly based on wearable technologies and inertial sensors with emphasis on gait, physical activity and sport. His research aims to perform outcome evaluation in orthopaedics, to improve motor function and intervention programs in aging and patients with movement disorders and pain, and to identify metrics of performance in sport science.
Kamiar Aminian is a member of the International Society of Posture and Gait Research, the Institute of Electrical and Electronics Engineers, the European Society of Movement Analysis in Adults and Children, the Prevention of fall Network Europe, the Intentional Society of Biomechanics and the President of the 3D analysis of the human movement group. He is author or co-author of more than 450 scientific papers published in reviewed journals and presented at international conferences and holds 10 patents related to medical devices.
Full CV
ORCID
John BotsisJohn (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.
Véronique MichaudBackground:
1994 Habilitation à diriger des recherches ( INPG, France)
1991 PhD in Materials Engineering ( MIT, USA)
1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France)
Activities:
Since January 2018: Associate Dean of Engineering, in charge of Education
June 2012-Dec.2017: Head of the Materials Science and Engineering Section
Since April 2017: Associate Professor at EPFL
2009-2017 : Professeur Titulaire at EPFL
1997-2009: Researcher at EPFL
1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France)
1991-1994 : Post-doctoral research associate, MIT (USA)
Author of about 300 publications of which 140 in peer-reviewed journals
Giovanni De MicheliExpertise
Design technologies for integrated systems on silicon, such as synthesis, hw/sw codesign and low-power design, as well as systems on heterogeneous platforms including electrical and biological components.
Scientific Director of EcoCloud Center at EPFL
Directing activities towards creating sustainable computation including AI.Designing energy-savvy data centers and edge devices.
More information
Please read http://si2.epfl.ch/~demichel/
Giovanni De Micheli is a research scientist in electronics and Rizlan Bernier-LatmaniHIGHER EDUCATION
Summer course: Advances in Genome Technology and Bioinformatics Course at the Marine Biology Laboratory in Woods Hole, MA. October 2005.
Ph.D. 2001 Civil and Environmental Engineering, Stanford University, CA
(Advisor, Jim Leckie, Biodegradation of uranyl (UO22 )-complexed citrate and implications for uranyl mobility in the subsurface)
M.S. 1995 Civil and Environmental Engineering, Stanford University, CA
B.S. 1993 Natural Resources with Honors, Cornell University, Ithaca, NY
PROFESSIONAL EMPLOYMENT
2013-present Associate professor with tenure, School of Architecture, Civil and Environmental Engineering, Swiss Federal Institute of Technology, Lausanne
2005-2013 Assistant professor tenure track, School of Architecture, Civil and Environmental Engineering, Swiss Federal Institute of Technology, Lausanne
2001-2005 Post-Graduate Researcher, Scripps Institution of Oceanography, La Jolla, CA (PI: Brad Tebo)
1995-2001 Graduate Research Assistant, Stanford University (Advisor: Jim Leckie)
RESEARCH INTERESTS
Gemicrobiology, metal-bacteria interactions, biological reduction and oxidation of metals, biological nanoparticle formation; Characterization of microbial communities in terrestrial environments; Using genomic, microscopic and spectroscopic tools to understand metal transformations by microorganisms.
ACADEMIC HONORS
Rotary Foundation University Professor grant, 2004.
Swiss National Science Foundation Post-doctoral Fellowship, 2001.
Leon B. Reynolds Memorial Scholarship in the School of Engineering at Stanford University, 1995-96.
Graduated with Honors from Cornell University, 1993.
BIBLIOMETRY
http://www.researcherid.com/rid/E-4398-2011
ResearcherID: E-4398-2011 Xile HuXile Hu was born in 1978 in Putian, southeastern China. He entered the Peking University in Beijing in 1996. Besides learning too little chemistry, his biggest regret in the college was not able to correct his southern accent in Mandarin. After graduated from PKU, he went to the United States and began his doctoral studies at the University of California, San Diego. In December 2004, he finished with a Ph.D. in chemistry and some fond memories of the beautiful city of San Diego. He then moved to the Los Angeles area and become a postdoctoral scholar at the California Institute of Technology. There he enjoyed numerous stimulating scientific (and other) discussions with friends and colleagues. He also made plenty of friends outside the campus and was a frequent in many local Chinese restaurants. In 2007, after two pleasant visits to Switzerland, he decided to move across the continent one more time and join the faculty of the École Polytechnique Fédérale de Lausanne (EPFL). He now directs the Laboratory of Inorganic Synthesis and Catalysis and is interested in developing chemistry for synthesis, energy and sustainability.
Denis GilletDenis Gillet received the Diploma in Electrical Engineering from the Swiss Federal Institute of Technology in Lausanne (EPFL) in 1988, and the Ph.D. degree in Information Systems also from the EPFL in 1995. During 1992 he was appointed as Research Fellow at the Information Systems Laboratory of Stanford University in the United States. He is currently Maître d'enseignement et de recherche at the EPFL School of Engineering, where he leads the React research group. His current research interests include Technologies Enhanced Learning (TEL), Human Computer Interaction (HCI), Human Devices Interaction (HDI) and Optimal Coordination of Complex and Distributed Systems. Denis Gillet is affiliated at EPFL with the Center for Intelligent Systems and the Center for Digital Education.
Edgard Gnansounou
-
1983 Ing. Civil EPFL
-
1991 Dr ès Sciences techniques, EPFL
-
Directeur du Laboratoire de systèmes énergétiques (LASEN) de 2003 à 2008
-
Dès 2008, Responsable du groupe de Recherche en Bioénergie et Planification énergétique
-
Co-fondateur du bureau d'étude ENERS Energy Concept
-
Président de la Fondation SUD (Solidarités Universitaires pour le Développement)
Je suis membre de différentes associations professionnelles parmi lesquelles figuent le Conseil Mondial de l'énergie (CME) et l'Association internationale pour l'économie de l'énergie (AIEE). Comme membre du groupe d'étude du CME sur les vulnérabilités, j'ai développé les métriques utilisées pour évaluer la vulnérabilité énergétique des pays industrialisés.
Depuis janvier 2008 : membre du Comité d'édition du journal international Bioresource Technology.
Depuis 2009: membre du Comité de la "European Biofuels Technology Platform" 