Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Nylon

Related publications (24)

Multi-scale experimental testing on variable stiffness and damping components for semi-active structural control

Gennaro Senatore

This paper presents experimental testing of a new semi-active vibration control device comprising a shape memory polymer (SMP) core that is reinforced by an SMP-aramid composite skin. This control device works as a load-transfer component that can be integ ...

ELSEVIER SCI LTD2022

Sustainable polyesters via direct functionalization of lignocellulosic sugars

François Maréchal, Véronique Michaud, Yves Leterrier, Harm-Anton Klok, Jeremy Luterbacher, Adrien Julien Demongeot, Graham Reid Dick, Maxime Alexandre Clément Hedou

The development of sustainable plastics from abundant renewable feedstocks has been limited by the complexity and efficiency of their production, as well as their lack of competitive material properties. Here we demonstrate the direct transformation of the ...

2022

Semiaromatic polyamides with enhanced charge carrier mobility

John Christopher Plummer, Holger Frauenrath, Nicolas Candau

The control of local order in polymer semiconductors using non-covalent interactions may be used to engineer materials with interesting combinations of mechanical and optoelectronic properties. To investigate the possibility of preparing n-type polymer sem ...

ROYAL SOC CHEMISTRY2021

Nature-inspired Circular-economy Recycling (NaCRe) for Proteins

Simone Giaveri

Since a few decades our planet has been loaded with billion tons of synthetic polymer-based materials, commonly named plastics. The large scale of plastic production, associated with its limited recyclability, are the driving force for the accumulation of ...

EPFL2021

Thermally-Drawn Multi-Electrode Fibers for Bipolar Electrochemistry and Magnified Electrochemical Imaging

Fabien Sorin

Imaging systems using closed bipolar electrode (cBPE) arrays and electrochemiluminescence (ECL) have attracted great attention in recent years as a 2D imaging platform with high spatiotemporal resolution. However, the fabrication techniques for cBPE arrays ...

Wiley2021

Silk granular hydrogels self-reinforced with regenerated silk fibroin fibers

Dominique Pioletti, Pierre-Etienne Bourban, Peyman Karami, Adrien Julien Demongeot, Céline Samira Wyss

Granular hydrogels with high stability, strength, and toughness are laborious to develop. Post-curing is often employed to bind microgels chemically and enhance mechanical properties. Here a unique strategy was investigated to maintain microgels together w ...

2021

Mechanical properties of natural fiber composites produced using dynamic sheet former

Arttu Ilari Miettinen

Composites formed from wood fibers and man-made cellulosic fibers in PLA (polylactic acid) matrix, manufactured using sheet forming technique and hot pressing, are studied. The composites have very low density (due to high porosity) and rather good elastic ...

2020

Engineering polymers with improved charge transport properties from bithiophene-containing polyamides

Rosario Scopelliti, Farzaneh Fadaei Tirani, John Christopher Plummer, Holger Frauenrath, Nicolas Candau, Bilal Özen

Polymer semiconductors show unique combinations of mechanical and optoelectronic properties that strongly depend on their microstructure and morphology. Here, we have used a model pi-conjugated bithiophene repeat unit to incorporate optoelectronic function ...

Royal Society of Chemistry2020

Microstructured biodegradable fibers for advanced controlled release

Shahrzad Shadman Yazdi

Biodegradable polymers are increasingly at the heart of therapeutic devices. Particularly in the form of thin and elongated fibers, they offer an effective strategy for controlled-release in a variety of biomedical configurations such as sutures, scaffolds ...

EPFL2020

Hinges for origami-inspired structures by multimaterial additive manufacturing

Jamie Paik, Jian-Lin Huang

Recent studies demonstrate novel metamaterials featuring unique properties by combining origami-inspired designs with additive manufacturing. In particular, the use of flexural hinges endow distinct advantages toward miniaturization and fabrication; howeve ...

2020

Mitigating tip vortex cavitation by a flexible trailing thread

Mohamed Farhat, Ali Amini

Tip Vortex Cavitation (TVC) is a major issue in design and operation of axial hydraulic machines. We investigate the capacity of a flexible trailing thread in alleviating TVC by analyzing the flow-induced motion. For this purpose, a nylon thread with three ...

AMER INST PHYSICS2019

Recycled Glass Fiber Composites from Wind Turbine Waste for 3D Printing Feedstock: Effects of Fiber Content and Interface on Mechanical Performance

Rodolphe Henri

This research validates the viability of a recycling and reusing process for end-of-life glass fiber reinforced wind turbine blades. Short glass fibers from scrap turbine blades are reclaimed and mixed with polylactic acid (PLA) through a double extrusion ...

2019

Synthesis of Loop Poly(Methyl Methacrylate) Brushes via Chain-End Postpolymerization Modification

Harm-Anton Klok, Piotr Mocny

Polymer brushes are typically densely grafted assemblies of polymer chains that are tethered via one end group to a solid substrate. Anchoring linear polymer chains via both end groups to a surface results in loop-type polymer brushes. Although loop polyme ...

American Chemical Society2019

Solar production of nylon polymers and prescursors for nylon polymer production

Sophia Haussener, Miguel Antonio Modestino

The present invention relates to process intensification, and renewable processing routes for polymer production, for example the solar production of Nylon 6,6 and precursors relevant for the Nylon 6,6 production (such as hydrogen, adiponitrile and hexaned ...

2018

Semiaromatic Polyamides and Copolyamides Comprising Kinked Repeating Units

Julien Philippe Cretenoud

The replacement of metals with polymer-based materials is considered to be key to reducing weight, cost, and cycle times in different technological applications, including the automotive and aerospace industries. Semiaromatic polyamides are particularly at ...

EPFL2018

Strategies for faster impregnation in melt thermoplastic resin transfer molding process

Damiano Salvatori

Continuous fiber thermoplastic composites are potential substitutes of steel in structural automotive components, since they combine fiber strength and rigidity with ductility, potential recyclability and low density of the thermoplastic (TP) matrix. Resin ...

EPFL2018

High-temperature copolyamides obtained by the efficient transamidation of crystalline-crystalline polyamide blends

Véronique Michaud, John Christopher Plummer, Holger Frauenrath, Sylvain Cyril Claude Galland

High-performance thermoplastic composites based on semiaromatic polyamides are prime candidates for metal replacement in lightweight structural applications. However, the low ductility and toughness of semiaromatic polyamides remain major obstacles to thei ...

Wiley-Blackwell2017

Microstructure tailoring of selenium-core multimaterial optoelectronic fibers

Cyril Cayron, Fabien Sorin, Alexis Gérald Page, Wei Yan, Yunpeng Qu, Dang Tùng Nguyen, Tapajyoti Dasgupta

The integration of semiconducting materials within thermally drawn multi-material polymer fibers is emerging as a versatile platform for flexible optoelectronics and advanced fabrics. Developing a deeper control over the microstructure of the electrically ...

Optical Society of America2017

Photocatalytic evaluation of TiO2/nylon systems prepared at different impregnation times

César Pulgarin, Juan Kiwi

TiO2/nylon fabrics were investigated for methanol degradation under UV light irradiation. TiO2 Degussa P-25 was supported on nylon by immersing the nylon in sol-gel TiO2 and silicone. The TiO2 layers on the nylon were explored as a function of the time of ...

Elsevier2011

Built-in 5-Aminooxazole as an Internal Activator of the Terminal Carboxylic Acid: An Alternative Access to Macrocyclodepsipeptides

Jieping Zhu

A conceptually novel macrolactonization technology is described. A strategically positioned 5-aminooxazole served as an internal traceless activator of the neighboring C-terminal carboxylic acid allowing the occurrence of macrolactonization under mild acid ...

Schweizerische Chemische Gesellschaft2011